Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of pins: 2
- Manufacturer: JP GROUP
-
Lisainfo: Sender Unit,
coolant temperature -
Additional information: Sender Unit,
coolant temperature
-
Engine Code: 6FZ
(EW7J4) - Pressure [bar]: 0.5
- Housing Colour: grey
- Manufacturer: JP GROUP
- Lisainfo: Oil Pressure Switch
- Additional information: Oil Pressure Switch
-
for OE number: 1628HR,
9635978280 -
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 400
- Number of pins: 4
- Weight [g]: 113
- Gross Weight [g]: 146
- Manufacturer: DENSO
-
Name: DN DOX-
2001
Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor
Additional information: "Tootja: DENSO
306 (7B, N3, N5), 04
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
306 (7B, N3, N5), 04
(kvaliteediklass: Q)"
-
for OE number: 1628HV,
4571477 - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
-
Cable Length [mm]: 1,
640 - Number of pins: 4
- Weight [g]: 110
- Gross Weight [g]: 143
- Manufacturer: DENSO
Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor
Additional information: "Tootja: DENSO
406 (8B), 10.95-05.0
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
406 (8B), 10.95-05.0
(kvaliteediklass: Q)"
- Thread Size: M 16
- Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Connector Shape: rectangular
- Manufacturer: DELLO AUTOMEGA
-
Engine Code: 6FZ
(EW7J4) - for OE number: OErefnolongersup
- Pressure [bar]: 0.5
- Spanner Size: 24
- Number of pins: 1
- Manufacturer: KAVO
-
Engine Code: 6FZ
(EW7J4) - Pressure [bar]: 0.5
- Thread Size: M16 x 1.5
- Spanner Size: 22
- Number of pins: 1
- Manufacturer: KAVO
- for OE number: 1338A7
- Spanner Size: 19
- Housing Colour: green
- Manufacturer: KAMOKA
-
Fabrication Number: ECT-
CT- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Connector Shape: rectangular
- Operating Mode: Hydraulic
- Thread Size: M 16
- Thread Pitch [mm]: 1.5
- Number of pins: 1
- Switch point from [bar]: 0.5
- Switch point to [bar]: 0.6
- Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fabrication Number: ECC-
CT- 001 -
Thread Size: M16x1,
5 - Pressure [bar]: 0.5
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Engine Code: 6FZ
(EW7J4) - Colour: black
- Pressure [bar]: 0.5
-
Thread Size: M16x1,
5 - Spanner Size: 21
- Name: OLISURVELLITUS
- Manufacturer: EPS
- Spanner Size: 19
- Colour: green
- Number of pins: 2
-
Thread Size: M12 x 1,
5, M12x1, 5 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Number of connectors: 1
- Manufacturer: JPN
- VET Number from: 07847
-
Thread Size: M 16x1,
5 - Housing Colour: grey
- Pressure [bar]: 0.5
- Manufacturer: FAE
- for RPO number from: 7875
- Pressure [bar]: 5
- Housing Colour: grey
-
Thread Size: M16x1.5-
6g - Diameter [mm]: 21
- Spanner Size: 21
- Number of pins: 1
- Name: OLISURVELLITUS
- Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: rectangular
- Number of pins: 2
- Spanner Size: 19
- Thread Size: M12x1.5
- for OE number: 9628454680
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- for OE number: 24268
- Spanner Size: 19
- Housing Colour: blue
- Manufacturer: KAMOKA
- Spanner Size: 22
- Colour: grey
- Number of pins: 1
- Pressure [bar]: 0.5
- Name: OLISURVELLITUS
- Manufacturer: MAX
- VET Number to: 07846
-
Thread Size: M 16x1,
5 - Housing Colour: grey
- Manufacturer: FAE
- Housing Type: Aluminium Housing
- Thread Size: M12x1.5
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: VER
- Pressure [bar]: 5
- Housing Colour: grey
-
Thread Size: M16x1.5-
6g - Diameter [mm]: 22
- Spanner Size: 22
- Number of pins: 1
- Name: OLISURVELLITUS
- Manufacturer: DLP
-
Engine Code: 6FZ
(EW7J4) - Colour: grey
- Pressure [bar]: 0.5
-
Thread Size: M16x1,
5 - Spanner Size: 21
- Corresponds to the original part in colour: brown
- Manufacturer: FACET
-
Engine Code: 6FZ
(EW7J4) - Colour: grey
- Pressure [bar]: 0.5
-
Thread Size: M16x1,
5 - Spanner Size: 21
- Corresponds to the original part in colour: brown
- Name: OLISURVELLITUS
- Manufacturer: EPS
- Switch Pressure [bar]: 0.5
- Thread Size: M16x1.5
-
Sensor Type: Closed-
type Sensor - Manufacturer: VERNET
- Spanner Size: 19
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FAST
- Connector Shape: rectangular
- Number of pins: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of pins: 2
- Connector Shape: rectangular
-
Fabrication Number: ECT-
RE- 000 - Manufacturer: NTY
-
Name: NTY ECT-
RE- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 2
- Connector Shape: rectangular
- Guarantee: 3 years guarantee
- Weight [kg]: 0.01
- Outer Diameter [mm]: 17
- Housing Diameter [mm]: 12
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV693
- Switch Pressure [bar]: 0.5
- Thread Size: M16x1.5
-
Sensor Type: Closed-
type Sensor - Name: OLISURVELLITUS
- Manufacturer: VER
- Spanner Size: 22
- Number of connectors: 1
- Colour: grey
- Shifting Points [bar]: 0.5
- Screw length below head [mm]: 13
- Weight [kg]: 0.045
- Supplementary Article/Info 2: with seal ring
- Name: OLISURVELLITUS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 2
-
Name: ANDUR,
SISENDOHU TEMPERATUUR - Manufacturer: MAX
- Number of connectors: 1
- Weight [kg]: 0.046
- Supplementary Article/Info 2: with seal ring
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: 6FZ
(EW7J4) -
Corresponds to the original part in colour: brown,
green -
Name: ANDUR,
SISENDOHU TEMPERATUUR - Manufacturer: EPS
-
Additional information: 1-
994- 005 -
Lisainfo: 1-
994- 005
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: rectangular
- Number of pins: 2
- Spanner Size: 19
- Thread Size: M14x1.25
- Temperature range [°C]: 120
- for OE number: 024268
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Vehicle Equipment: for vehicles with air conditioning
- Manufacturer: FAE ELEKTRYKA
- Sensor Type: NTC Sensor
- Voltage [V]: 12
- Number of pins: 2
- Housing Colour: grey
- Manufacturer: FAE
-
Thread Size: M16 x 1,
5 - Switch Pressure [bar]: 0.5
- Weight [kg]: 0.047
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 1920.EN
- Length [mm]: 24
-
Fabrication Number: ECP-
CT- 008 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Connector Shape: rectangular
- Material: Plastic
- Number of pins: 2
- Plug Type: Female
- Sensor Type: NTC Sensor
- Spanner Size: S19
-
Thread Size: M12*1,
5 - Name: NI 207087
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
-
Fabrication Number: ECP-
CT- 005 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 9632400580
- Sensor Type: Passive sensor
- Manufacturer: KAMOKA
- Manufacturer: VERNET
- Additional information: AS0006 VERNET
- Lisainfo: AS0006 VERNET
- for RPO number from: 09279
- Connector Shape: rectangular
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: 6FZ
(EW7J4) - Construction Year from: 06.2002
- Sensor Type: Passive sensor
- Supplementary Article/Info 2: without pipe
- Voltage [V]: 12
-
Name: ANDUR,
VNTVOLL - Manufacturer: MAX
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Number of connectors: 2
- Weight [kg]: 0.01
-
Name: ANDUR,
SISENDOHU TEMPERATUUR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 2
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Housing Colour: green
- Number of pins: 2
-
Thread Size: M12X1.5-
6g - Spanner Size: 19
- Manufacturer: DELPHI
-
Name: DE TS10218-
12B1
- Number of connectors: 2
- Weight [kg]: 0.007
- Manufacturer: BLUE PRINT ELEKTRYKA
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 2
- Connector Shape: rectangular
- Socket colour: grey
- Colour Coding: white
-
Thread Size: M 12x1,
5 - Spanner Size: 19
- for OE number: 1920C5
- Manufacturer: MEAT & DORIA
- Vehicle Equipment: for vehicles without air conditioning
- Manufacturer: FAE
- Mounting Type: Bolted
- Voltage [V]: 12
-
Resistor [Ohm]: 5,
000, 600 -
Supplementary Article/Supplementary Info: with gasket/
seal - Temperature range from [°C]: 25
- Temperature range to [°C]: 80
-
Thread Size: M12x1,
5 - Colour: green
- Spanner Size: 19
- Sensor Type: NTC Sensor
- Number of pins: 2
- Colour Coding: yellow
- Assy./disassy. by qualified personnel required!:
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Height [mm]: 24
- Resistor [Ohm]: 400
- Number of connectors: 2
- Manufacturer: VERNET
- Switch Point [°C]: 115
- Vehicle Equipment: for vehicles without air conditioning
- Number of pins: 2
- Weight [kg]: 0.042
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thread Size: M12x1,
5 - Number of pins: 2
- Housing Colour: grey
- Manufacturer: FAE
- Height [mm]: 24
- Resistor [Ohm]: 400
- Number of connectors: 2
- Manufacturer: VERNET
-
External Thread Size: M12 x 1,
5 - Spanner Size: 19
- Number of connectors: 2
- Colour: green
- Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: 6FZ
(EW7J4) - Colour: green
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Manufacturer: FACET
-
Engine Code: 6FZ
(EW7J4) - Colour: green
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Manufacturer: FACET
- Name: EP 1.830.276
- Construction Year to: 04.2002
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV
- Construction Year from: 06.2002
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV300
- Manufacturer: ESEN SKV
- Construction Year from: 05.2002
- Number of pins: 2
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: without cable
- Quality: OE EQUIVALENT
- for OE number: 9640627780
- Manufacturer: MEAT&DORIA
- Additional information: 87243E MD
- Lisainfo: 87243E MD
- Required quantity: 1
- Construction Year from: 06.2002
- Number of pins: 2
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: BREMI
- for RPO number up to: 09278
- Required quantity: 1
- Resistor [Ohm]: 390
- Colour: black
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Number of connectors: 2
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 24
- Supplementary Article/Info 2: without cable
- Weight [kg]: 0.041
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thread Size: M12 x 1,
5 - Spanner Size: 19
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 2
- Weight [kg]: 0.035
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: 6FZ
(EW7J4) - Sensor Type: NTC Sensor
-
Thread Size: M12 x 1,
5 - Spanner Size: 19
- Supplementary Article/Info 2: with seal ring
- Colour: green
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Construction Year from: 05.2002
- Manufacturer: MAGNETI MARELLI
-
External Thread Size: M12 x 1,
5 - Spanner Size: 19
- Number of connectors: 2
- Colour: green
- Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Name: SW 62 92 6318
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fabrication Number: ECP-
CT- 024 - Sensor Type: Hall Sensor
- Number of pins: 3
- Supplementary Article/Info 2: without cable
- Connector Shape: rectangular
- Manufacturer: NTY
- Number of pins: 2
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Construction Year from: 06.2002
- Number of pins: 2
- Sensor Type: Inductive Sensor
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging - Manufacturer: HUCO
- Construction Year to: 04.2002
- Manufacturer: MAGNETI MARELLI
- for RPO number up to: 09278
- Length [mm]: 24
- Number of connectors: 2
- Weight [kg]: 0.02
- for OE number: 1920.7N
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Required quantity: 1
- Construction Year to: 05.2002
- Number of pins: 2
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: BREMI
- Length [mm]: 24
- Number of connectors: 2
- Weight [kg]: 0.031
- for OE number: 1920.EN
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fabrication Number: ESS-
CT- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 2
-
Name: ANDUR,
VNTVOLL - Manufacturer: DLP
- Construction Year from: 06.2002
-
Engine Code: 6FZ
(EW7J4) - Number of pins: 2
-
Name: ANDUR,
VNTVOLL - Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
XSARA PICASSO (N68),
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
XSARA PICASSO (N68),
(kvaliteediklass: PJ)"
- for RPO number up to: 09278
- Length [mm]: 24
- Number of connectors: 2
- Weight [kg]: 0.02
- for OE number: 1920.7N
- Name: SW 62 92 6335
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 05.2002
- Manufacturer: NRF
- Colour: grey
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: METZGER
- for RPO number from: 09279
- Number of pins: 2
- Resistor [Ohm]: 400
- Version: IAM
- Manufacturer: METZGER
-
Engine Code: 6FZ
(EW7J4) - Construction Year from: 06.2002
- Manufacturer: FACET
- Construction Year to: 05.2002
- Number of pins: 2
- Fitting Depth [mm]: 24.2
-
Name: ANDUR,
VNTVOLL - Manufacturer: TRI
-
Engine Code: 6FZ
(EW7J4) - Construction Year from: 06.2002
-
Name: ANDUR,
VNTVOLL - Manufacturer: EPS
- Number of pins: 2
-
for manufacturer number: 6PT 009 109-
221 - Assy./disassy. by qualified personnel required!:
- Name: HE 6PT009109221
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Engine Code: 6FZ
(EW7J4) - Manufacturer: FACET
-
Engine Code: 6FZ
(EW7J4) - Name: DETONATSIOONIANDUR
- Manufacturer: EPS
- Construction Year to: 05.2002
- Voltage [V]: 12
- Resistor [Ohm]: 475
- Tolerance [%]: 10
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: HE 6PU009146421
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Connector Shape: rectangular
- Number of pins: 3
- Supplementary Article/Info 2: without cable
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: 6FZ
(EW7J4) - Construction Year to: 05.2002
- Manufacturer Restriction: SIEMENS
- Manufacturer: FACET
- Name: EP 1.953.260
-
Engine Code: 6FZ
(EW7J4) - Construction Year to: 05.2002
- Manufacturer Restriction: SIEMENS
- Manufacturer: FACET
- for RPO number from: 09279
- Sensor Type: Inductive Sensor
- Number of pins: 2
-
Name: ANDUR,
VNTVOLL - Manufacturer: MEY
- Construction Year from: 06.2002
- Voltage [V]: 12
- Resistor [Ohm]: 400
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Supplementary Article/Info 2: without cable
-
Corresponds to the original part in colour: black,
grey - Fitting Position: Flywheel side
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU009163471
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year from: 04.2002
- Construction Year to: 06.2004
- for RPO number from: 9279
-
Name: ANDUR,
VNTVOLL - Manufacturer: BOS
- Resistor [Ohm]: 390
- Colour: grey
- Number of pins: 2
- Fitting Depth [mm]: 24
- Weight [kg]: 0.026
- Manufacturer: ERA
-
Engine Code: 6FZ
(EW7J4) - Number of pins: 2
- Manufacturer: VDO
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Voltage [V]: 12
- Connector Shape: angled
- Supplementary Article/Info 2: without cable
- Resistor [Ohm]: 400
- Manufacturer: VALEO
- Name: VA 254049
- Construction Year to: 03.2002
- for RPO number up to: 9278
-
Name: ANDUR,
VNTVOLL - Manufacturer: BOS
- Number of pins: 2
- Manufacturer: FAE
-
Engine Code: 6FZ
(EW7J4) - Number of pins: 2
- Manufacturer: FAE
- Construction Year from: 02.2002
- Construction Year to: 04.2004
- Engine Code: EW7J4
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Connector Shape: angled
- Supplementary Article/Info 2: without cable
- Manufacturer: VALEO
- Height [mm]: 20.3
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Manufacturer: VERNET
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of connectors: 2
- Weight [kg]: 0.037
- for OE number: 5946.31
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pressure [bar]: 20
-
Thread Size: M12 x 1,
25 - Technical Information Number: circuit N.C.
- Manufacturer: ERA
- Alternatively:
- Number of pins: 3
- Fitting Depth [mm]: 20
- Housing Colour: grey
- Weight [kg]: 0.018
- Alternative Repair Kit: 550010
- Manufacturer: ERA
- Construction Year to: 06.2004
- Manufacturer: BOSCH
- Voltage [V]: 12
- Number of pins: 2
- Tightening Torque [Nm]: 20
- Supplementary Article/Info 2: without cable
- Corresponds to the original part in colour: black
- Plug Type: Blade Terminal
- Connector Shape: Square
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PG013114411
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Engine Code: 6FZ
(EW7J4) - Colour: black
- Number of pins: 2
- Manufacturer: VDO
- Number of pins: 3
- Connector Shape: rectangular
- Supplementary Article/Info 2: without cable
- Sensor Type: Hall Sensor
- Fitting Depth [mm]: 20
- Quality: OE EQUIVALENT
- for OE number: 000019208W
- Manufacturer: MEAT&DORIA
-
Oxygen Sensor: Oxygen Sensor,
Thread pre- greased -
Fabrication Number: ESL-
UV- 001 - Manufacturer: NTY
-
Name: NTY ESL-
UV- 001
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Oxygen Sensor: Regulating Probe,
Thread pre- greased - Connector/Clamp: Connector may need adjustment
- Number of circuits: 4
- Fitting Position: before catalytic converter
-
Fabrication Number: ESL-
UV- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Engine Code: 6FZ
(EW7J4) - Manufacturer: FACET
-
Engine Code: 6FZ
(EW7J4) -
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: EPS
- Diameter [mm]: 12
- Manufacturer: VALEO
- Name: VA 255602
- Voltage [V]: 12
- Number of pins: 3
- Rotation Direction: Clockwise rotation
- Number of mounting bores: 2
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PX008476771
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Engine Code: 6FZ
(EW7J4) - Number of pins: 3
- Socket colour: grey
- Manufacturer: FAE
- Length [mm]: 54.5
- Number of connectors: 3
- Weight [kg]: 0.02
- Manufacturer: FEBI BILSTEIN
- Additional information: 31239 NRF
- Lisainfo: 31239 NRF
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 06.2004
-
Oxygen Sensor: Regulating Probe,
Oxygen Sensor - Fitting Position: before catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- for OE number: 1338 A7
-
Manufacturer Restriction: Citroen,
Fiat, Lancia, Peugeot, Renault, Toyota - Number of pins: 2
- Cable Length [mm]: 200
- Plug Type ID: Code Z
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
- Cable Cross Section [mm²]: 0.75
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
tagumine udutulelatern - Manufacturer: HBE
- Number of pins: 2
- Name: DE AS10174
- Manufacturer: DELPHI
- Fitting Position: before catalytic converter
-
Oxygen Sensor: Regulating Probe,
Planar probe -
Emission Standard: FL5/
L5, L4 - Number of pins: 4
- Length [mm]: 660
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Technical Information Number: Universal
- Overall Length [mm]: 325
- Number of pins: 4
- Oxygen Sensor: Regulating Probe
- Manufacturer: ASHIKA
-
Lisainfo: 43-
U04 -
Additional information: 43-
U04
- Technical Information Number: Universal
- Overall Length [mm]: 325
- Number of pins: 4
- Oxygen Sensor: Regulating Probe
- Manufacturer: JAPKO
-
Line insulation design: with silicone-
coated woven- fibre insulation - Length [mm]: 570
-
Oxygen Sensor: Regulating Probe,
Thread pre- greased - Weight [kg]: 0.144
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 54.5
- Number of connectors: 3
- Weight [kg]: 0.02
- Name: SW 62 93 1239
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Oxygen Sensor: Regulating Probe,
Oxygen Sensor - Construction Year to: 02.2004
- Exhaust System: before catalytic converter
- Voltage [V]: 12
- Weight [kg]: 0.1
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ENERGY
- Voltage [V]: 12
- Corresponds to the original part in colour: grey
- Sensor Type: Hall Sensor
- Number of pins: 3
- Supplementary Article/Info 2: without cable
- Colour Coding: black
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year to: 06.2004
- Manufacturer: BOSCH
- Oxygen Sensor: Oxygen Sensor
- Guarantee: 3 years guarantee
- Weight [kg]: 0.12
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV121
- Manufacturer: ESEN SKV
- Fitting Position: after catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation - Weight [kg]: 0.117
-
Oxygen Sensor: Thread pre-
greased - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Oxygen Sensor: Oxygen Sensor
- Voltage [V]: 12
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.14
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV904
- Manufacturer: ESEN SKV
- Construction Year to: 06.2004
-
Oxygen Sensor: Diagnostic Probe,
Heated - Fitting Position: after catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Oxygen Sensor: Regulating Probe,
Oxygen Sensor - Fitting Position: before catalytic converter
- Block Separation:
-
Exhaust System: for pre-
catalytic converter - Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Construction Year to: 06.2004
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: ENERGY
- Oxygen Sensor: Heated
- Cable Length [mm]: 640
- Manufacturer: FAST
-
Transmission Type: for 4-
speed automatic transmission - Guarantee: 3 years guarantee
- Weight [kg]: 0.11
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV839
- Manufacturer: ESEN SKV
- Number of pins: 3
- Fitting Depth [mm]: 20
- Housing Colour: grey
- Weight [kg]: 0.018
- Manufacturer: ERA
-
Oxygen Sensor: Regulating Probe,
Planar probe, Heated - Fitting Position: before catalytic converter
- Cable Length [mm]: 525
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)"
- Construction Year from: 01.2002
-
Engine Code: 6FZ
(EW7J4) - Number of pins: 3
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: DLP
-
Oxygen Sensor: Regulating Probe,
Heated - Number of pins: 4
- Cable Length [mm]: 640
- Quality: OE EQUIVALENT
- for OE number: 55351836
- Manufacturer: MEAT&DORIA
- Oxygen Sensor: Diagnostic Probe
- Construction Year to: 02.2004
-
Engine Code: 6FZ
(EW7J4) - Voltage [V]: 12
-
Length [mm]: 1,
490 - Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.15
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV039
-
Oxygen Sensor: Regulating Probe,
Oxygen Sensor - Construction Year to: 02.2004
- Exhaust System: before catalytic converter
- Voltage [V]: 12
- Guarantee: 3 years guarantee
- Weight [kg]: 0.1
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV097
- Manufacturer: ESEN SKV
-
Oxygen Sensor: Regulating Probe,
Planar probe, Heated - Fitting Position: before catalytic converter
- Cable Length [mm]: 380
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Resistor [Ohm]: 3.5
- Conductor Number: 4
- Length [mm]: 570
- Number of circuits: 4
- Cable Length [mm]: 570
- Oxygen Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
- Oxygen Sensor: Oxygen Sensor
- Cable Length [mm]: 290
- Alternatively:
- Supplementary Article/Info 2: without plug
- Number of circuits: 4
- Alternative Repair Kit: 570111
- Manufacturer: ERA
-
Oxygen Sensor: Regulating Probe,
Oxygen Sensor - Construction Year to: 02.2004
-
Engine Code: 6FZ
(EW7J4) - Voltage [V]: 12
- Length [mm]: 540
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.1
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV035
- Manufacturer: ESEN SKV
- Construction Year to: 04.2004
- Oxygen Sensor: Regulating Probe
- Length [mm]: 540
- Number of connectors: 4
- Manufacturer: VERNET
-
Oxygen Sensor: Regulating Probe,
Planar probe, Heated - Fitting Position: before catalytic converter
- Cable Length [mm]: 530
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Oxygen Sensor: Heated
-
Thread Size: M18 x 1,
5 - Number of pins: 4
- Connector Shape: rectangular
- Overall Length [mm]: 600
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
Manufacturer: MAGNETI MARELLI
- Construction Year to: 06.2004
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Fitting Position: after catalytic converter
-
Emission Standard: Euro 3,
Euro 4 -
Oxygen Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
-
Cable Length [mm]: 1,
300 - Weight [kg]: 0.154
- Name: SW 33 10 3128
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 20
- Guarantee: 5 years guarantee
- Manufacturer: HUCO
- Construction Year to: 06.2004
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
-
Line insulation design: with silicone-
coated woven- fibre insulation - Connector Shape: round
- Conductor Number: 4
- Cable Length [mm]: 450
-
Thread Size: M18 x 1,
5 - Length [mm]: 570
-
Version: ZR-
PLANAR - Weight [kg]: 0.143
-
Oxygen Sensor: Thread pre-
greased - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 02.2004
- Oxygen Sensor: Diagnostic Probe
- Voltage [V]: 12
-
Length [mm]: 1,
900 - Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.2
- Resistor [Ohm]: 6
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV704
-
Fitting Position: Front,
before catalytic converter -
Oxygen Sensor: Regulating Probe,
Heated, Thread pre- greased -
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- Number of circuits: 4
- Socket colour: green
- Connector Shape: rectangular
-
Thread Size: M18 x 1,
5 - Weight [kg]: 0.138
- for OE number: 96 369 687 80
- Cable Length [mm]: 500
- Length [mm]: 600
- Number of connectors: 4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: before catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Oxygen Sensor: Planar probe,
Heated, Thread pre- greased - Supplementary Article/Info 2: without plug
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Oxygen Sensor: Regulating Probe,
Heated - Fitting Position: before catalytic converter
- Cable Length [mm]: 600
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Name: Lambda andur
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Number of pins: 3
- Sensor Type: Hall Sensor
- Version: OE
- Manufacturer: METZGER
- Number of pins: 3
- Connector Shape: oval
- Number of mounting bores: 2
- Supplementary Article/Info 2: without cable
- Rotation Direction: Clockwise rotation
- for OE number: 1628JX
-
Name: Andur,
drosselklapiasend - Manufacturer: MD
-
Exhaust System: for pre-
catalytic converter - Cable Length [mm]: 540
-
Oxygen Sensor: Planar probe,
Heated - Manufacturer: DELPHI
-
Name: DE ES20258-
12B1
-
Engine Code: 6FZ
(EW7J4) - Fitting Position: before catalytic converter
- Switching Capacity [W]: 10
- Length [mm]: 565
- Cable Length [mm]: 570
- Conductor Number: 4
- Available as universal article as well, see article no.: 10.7007
- Number of circuits: 4
- Manufacturer: FACET
Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased
-
Engine Code: 6FZ
(EW7J4) - Fitting Position: before catalytic converter
- Switching Capacity [W]: 10
- Length [mm]: 565
- Cable Length [mm]: 570
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.997.007
- Number of circuits: 4
- Name: LAMBDA ANDUR
- Manufacturer: EPS
Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased
Manufacturer: FAST
-
Oxygen Sensor: Diagnostic Probe,
Planar probe, Heated - Fitting Position: after catalytic converter
-
Cable Length [mm]: 1,
410 -
Name: DE ES20309-
12B1 - Manufacturer: DELPHI
- Fitting Position: transmission sided
- Transmission Type: Automatic Transmission
-
Transmission ID: AL4,
AT8 - Number of pins: 3
- Cable Length [mm]: 790
- Version: IAM
- Manufacturer: METZGER
- Construction Year to: 04.2004
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Length [mm]: 540
- Number of circuits: 4
- Manufacturer: VDO
- Oxygen Sensor: Diagnostic Probe
-
Fitting Position: Rear,
after catalytic converter -
Length [mm]: 1,
300 - Technical Information Number: Universal 77015
- Manufacturer: FAE
- Quality: OE EQUIVALENT
- for OE number: 7700100009
-
Name: Andur,
Olisurve - Manufacturer: MD
- Construction Year to: 06.2004
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
- Manufacturer: BOSCH
- Construction Year to: 04.2004
- Oxygen Sensor: Diagnostic Probe
-
Length [mm]: 1,
240 - Number of connectors: 4
-
Oxygen Sensor: Regulating Probe,
Heated - Fitting Position: before catalytic converter
- Cable Length [mm]: 530
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PA358103391
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Fabrication Number: EBP-
PE- 000 - Manufacturer: NTY
-
Name: NTY EBP-
PE- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Construction Year to: 04.2004
-
Oxygen Sensor: Regulating Probe,
Thread pre- greased -
Fitting Position: Exhaust Manifold,
after catalytic converter -
Line insulation design: with silicone-
coated woven- fibre insulation - Connector Shape: D Shape
- Conductor Number: 4
- Cable Length [mm]: 450
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: rectangular
- Number of pins: 3
- Supplementary Article/Info 2: with seal ring
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks