Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Rear
-
Material: Rubber/
Metal - Length [mm]: 28
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 30
- Length 1 [mm]: 34
- Manufacturer: MERTZ
- Fitting Position: Front
-
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 30
- Length 2 [mm]: 34
- Length 1 [mm]: 28
- for OE number: 180904
-
Name: KINNITUS,
MOOTOR - Manufacturer: SAS
- Lisainfo: 8091041 SAS
- Additional information: 8091041 SAS
- Fitting Position: Rear
- Height [mm]: 34
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.081
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 180608
- Fitting Position: Rear
- Required quantity: 1
-
Material: Rubber/
Metal - Weight [g]: 69
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 30
- Length [mm]: 28
- Overall Length [mm]: 34
- Name: IM 2142
- Manufacturer: ORIGINAL IMPERIUM
-
Length [mm]: 28,
34 - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 30
-
Material: Rubber/
Metal - Fitting Position: Rear
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.06
- Observe service information:
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: FEB
- Additional information: F09400
- Lisainfo: F09400
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Left Front
- Required quantity: 1
- Weight [g]: 253
- Manufacturer: IMP
Name: PODUSZKA SIL. CITROEN BX, C15, SAXO, VISA, XANTIA, ZX, PEUGEOT 106, 205, 305, 306, 309, 405, 406 03.82-10.04 LE PRZàD
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Left
- for OE number: 1843 95
- Manufacturer: KAMOKA
-
Fitting Position: Front Axle,
Right - for OE number: 1843 55
- Manufacturer: GSP ZAWIESZENIE
-
Mounting Type: Rubber-
Metal Mount -
Fitting Position: Rear,
Front -
Material: Rubber/
Metal - Height [mm]: 53
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 70
- Height 1 [mm]: 40
- Manufacturer: MERTZ
- Fitting Position: Left Front
-
Length [mm]: 100,
80 - Width [mm]: 69.5
- Height [mm]: 47.5
- Weight [kg]: 0.24
- Inner Diameter [mm]: 13
- Weight [g]: 240
- Manufacturer: METALCAUCHO
-
Fitting Position: Rear,
Front -
Mounting Type: Rubber-
Metal Mount - Lisainfo: Engine Mounting
- Additional information: Engine Mounting
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: transmission sided
- for OE number: 184395
-
Name: KINNITUS,
MOOTOR - Manufacturer: SAS
- Fitting Position: Upper Right
-
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 10
- Outer Diameter [mm]: 70
- Length 2 [mm]: 53
- Length 1 [mm]: 40
- for OE number: 180916
-
Name: KINNITUS,
MOOTOR - Manufacturer: SAS
-
Fitting Position: Rear,
Front -
Width [mm]: 40,
53 - Weight [kg]: 0.26
-
Material: Rubber/
Metal - Inner Diameter [mm]: 10
- Outer Diameter [mm]: 70
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 260
- Manufacturer: METALCAUCHO
- Fitting Position: Rear
- Weight [kg]: 0.17
- Height 1 [mm]: 40
- Height 2 [mm]: 53
-
Material: Rubber/
Metal - Inner Diameter [mm]: 10
- Outer Diameter [mm]: 65
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 170
- Manufacturer: METALCAUCHO
- Fitting Position: engine sided
-
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 10
- Outer Diameter [mm]: 70
- for OE number: 180916
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: MAX
- Transmission Type: Manual Transmission
-
Mounting Type: Rubber-
Metal Mount - for OE number: 9613 305 380
-
Fitting Position: engine sided,
Rear - Outer Diameter [mm]: 70
- Inner Diameter [mm]: 10
- Weight [kg]: 0.2
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear
-
Length [mm]: 40,
53 - Weight [kg]: 0.29
-
Material: Rubber/
Metal - Inner Diameter [mm]: 10
- Outer Diameter [mm]: 70
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 290
- Manufacturer: METALCAUCHO
-
Fitting Position: Right Rear,
Right Front -
Material: Rubber/
Metal - Weight [g]: 308
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 70
- Length [mm]: 40
- Overall Length [mm]: 53
-
Name: Paigutus,
Mootor - Manufacturer: IMP
-
Fitting Position: Rear,
Lower, both sides - Name: DE TEM064
- Manufacturer: DELPHI
-
Height [mm]: 40,
53 - Inner Diameter [mm]: 10
- Outer Diameter [mm]: 70
-
Material: Rubber/
Metal -
Fitting Position: Rear,
Front -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.2
- Observe service information:
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear
-
Mounting Type: Rubber-
Metal Mount - Outer Diameter [mm]: 70
- Inner Diameter [mm]: 10
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: MEY
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Centre
- Manufacturer: FAST
-
Fitting Position: Front,
Upper Right, Upper -
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 10
- Outer Diameter [mm]: 40
- Length 1 [mm]: 50
- Length 2 [mm]: 32
- for OE number: 9633919880
-
Name: KINNITUS,
MOOTOR - Manufacturer: SAS
- Fitting Position: Right Front
- Transmission Type: Manual Transmission
-
Mounting Type: Rubber-
Metal Mount -
for OE number: 1809.21,
96133053 - Manufacturer: DELLO AUTOMEGA
- Weight [kg]: 0.273
- Fitting Position: Front Axle
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 70
- Width 1 [mm]: 53
- Width 2 [mm]: 40
- Manufacturer: 3RG
- Inner Diameter [mm]: 10
-
Height [mm]: 40,
53 - Outer Diameter [mm]: 70
-
Material: Rubber/
Metal -
Fitting Position: Rear,
Front -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.2
- Name: SW 62 13 0006
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Left
- Weight [kg]: 0.42
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 420
- Manufacturer: METALCAUCHO
-
Fitting Position: Front,
Upper Right, Upper -
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 10
- Outer Diameter [mm]: 69
- Length 1 [mm]: 53
- Length 2 [mm]: 40
- for OE number: 96277722
-
Name: KINNITUS,
MOOTOR - Manufacturer: SAS
- Fitting Position: Rear
- not for article number: 2995
- Weight [kg]: 0.33
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 330
- Manufacturer: METALCAUCHO
-
Mounting Type: Rubber-
Metal Mount -
Fitting Position: inner,
Lower Right - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Front
- Name: Transmission mounting left
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
PEUGEOT 206
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
PEUGEOT 206
(kvaliteediklass: PJ)"
-
Fitting Position: Right,
Lower Right - Vehicle Identification Number (VIN) from: O 07967
- Mounting Type: Hydro Mount
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Right
- Mounting Type: Hydro Mount
- Transmission Type: Manual Transmission
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: MAX
-
Fitting Position: transmission sided,
Left - Manufacturer: FAST
- Fitting Position: Right
- Transmission Type: Manual Transmission
-
Fabrication Number: ZPS-
PE- 003 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Upper Right
-
Thread Size: M10x1,
5 - for OE number: 182732
-
Name: KINNITUS,
MOOTOR - Manufacturer: SAS
- Fitting Position: Right Front
- Weight [kg]: 0.79
- Mounting Type: Hydro Mount
- Weight [g]: 790
- Manufacturer: METALCAUCHO
- Weight [kg]: 0.7
- Specification: No Hidraulica
- Fitting Position: Right
- Width [mm]: 82
- Outer Diameter [mm]: 92
- Manufacturer: 3RG
- Mounting Type: Hydro Mount
- Fitting Position: Right
- Manufacturer: FAST
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Upper Right
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: engine sided
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.64
-
Name: DY 71-
22154 - Manufacturer: DYS
-
Fitting Position: Front Axle,
Left - Manufacturer: GSP
- for OE number: 182724
- Fitting Position: Right Front
- Required quantity: 1
- Mounting Type: Hydro Mount
- Weight [g]: 592
-
Name: Paigutus,
Mootor - Manufacturer: IMP
- Additional information: F36308
- Lisainfo: F36308
- Transmission Type: Manual Transmission
- Fitting Position: Right
- Mounting Type: Hydro Mount
- Weight [kg]: 1.003
- for OE number: 1844.77
- Observe service information:
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Right
- Quality: OE Performance
- Operating Mode: Hydraulic
- Colour: silver
- Weight [g]: 663
- Manufacturer: GATES
- Fitting Position: Right
- Mounting Type: Hydro Mount
- Manufacturer: JP GROUP
- Lisainfo: Engine Mounting
- Additional information: Engine Mounting
- Fitting Position: Right
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: JP GROUP
- Lisainfo: Engine Mounting
- Additional information: Engine Mounting
- Mounting Type: Hydro Mount
- Weight [kg]: 0.775
- Fitting Position: Right
- Width [mm]: 82
- Outer Diameter [mm]: 92
- Manufacturer: 3RG
- for OE number: 182723
- Fitting Position: Right Front
- Height [mm]: 82
- Required quantity: 1
- Mounting Type: Hydro Mount
- Weight [g]: 860
- Outer Diameter [mm]: 92
- Name: IM 31042
- Manufacturer: ORIGINAL IMPERIUM
- Mounting Type: Hydro Mount
- Fitting Position: Lower Right
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Upper Right
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Right
- Weight [kg]: 0.8
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 800
- Manufacturer: METALCAUCHO
-
Fitting Position: Right,
Front - Manufacturer: DELPHI
- Name: DE TEM066
- Fitting Position: Right
-
Fabrication Number: ZPS-
PE- 040 -
Mounting Type: Rubber-
Metal Mount - for OE number: 1806.34
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Right
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.8
- for OE number: 1806.34
- Observe service information:
-
Name: Paigutus,
Mootor - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Right
- for OE number: 1844 77
- Weight [kg]: 0.8
- Mounting Type: Hydro Mount
- Manufacturer: CORTECO
- Name: COC 21652742
- Transmission Type: Manual Transmission
- Fitting Position: Right
- Mounting Type: Hydro Mount
- Weight [kg]: 1.003
- for OE number: 1844.77
- Name: SW 64 13 0009
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear
- Name: COC 49368244
- Manufacturer: CORTECO
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Front
- Name: Engine mounting right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
C.JUMPY/EVASION 95-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
C.JUMPY/EVASION 95-
(kvaliteediklass: PJ)"
- Fitting Position: Right
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 40
- Manufacturer: FAST
- Fitting Position: Right
- Mounting Type: Hydro Mount
- Manufacturer: METZGER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks