• Transmission Type: Manual Transmission
• for OE number: 1628HR, 9635978280
• Emission Standard: Euro 3 (D3)
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 400
• Number of pins: 4
• Weight [g]: 113
• Gross Weight [g]: 146
• Manufacturer: DENSO
• Name: DN DOX-2001

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
306 (7B, N3, N5), 04
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
306 (7B, N3, N5), 04
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Connector/Clamp: Connector may need adjustment
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-UV-000
• Manufacturer: NTY

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Emission Standard: Euro 3 (D3)
• Length [mm]: 555
• Transmission Type: Manual Transmission
• Fabrication Number: ESL-CT-004
• Manufacturer: NTY
• Name: NTY ESL-CT-004

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased

• Emission Standard: Euro 2
• Length [mm]: 410
• Fabrication Number: ESL-CT-007
• Manufacturer: NTY
• Name: NTY ESL-CT-007

Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Emission Standard: Euro 3 (D3)
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Engine Code: KFX (TU3JP)
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Block Separation:
• Number of circuits: 4
• Cable Length [mm]: 400
• Thread Size: M18x1,5
• Spanner Size: 22
• for OE number: 1628HR
• Manufacturer: DELLO AUTOMEGA

• Engine Code: KFW (TU3JP), KFX (TU3JP)
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Planar probe
• Emission Standard: CEE 2000, L4
• Number of pins: 4
• Length [mm]: 660
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Engine Code: KFX (TU3JP)
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• for manufacturer exhaust norm: EURO2000;CEE2000
• Block Separation:
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 410
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: KFW (TU3JP)
• Construction Year from: 11.1999, 03.2000
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Lambda Sensor
• for RPO number from: 8365
• Block Separation:
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: KFX (TU3JP)
• Construction Year from: 02.1998
• Lambda Sensor: Regulating Probe, Heated
• Transmission Type: Automatic Transmission, Manual Transmission
• for RPO number up to: 8364, 7724
• for manufacturer exhaust norm: EURO93-CEE19.5oder, EURO96;CEE95;L3
• for RPO number from: 7725
• Block Separation:
• Construction Year to: 01.1998
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.14
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV904
• Manufacturer: ESEN SKV

• Engine Code: KFW (TU3JP), KFX (TU3JP)
• Lambda Sensor: Diagnostic Probe, Planar probe
• Fitting Position: after catalytic converter
• Emission Standard: CEE 2000, L4
• Number of pins: 4
• Length [mm]: 590
• Name: LAMBDA ANDUR
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Manual Transmission
• Emission Standard: Euro 3 (D3)
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Engine Code: KFX (TU3JP)
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Planar probe
• Emission Standard: CEE 2000
• Block Separation:
• Number of pins: 4
• Length [mm]: 455
• Manufacturer: TOPRAN

Fitting Position: before catalytic converter, after catalytic converter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Resistor [Ohm]: 6
• Length [mm]: 570
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 570
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Construction Year from: 01.2000
• Construction Year to: 06.2003
• Transmission Type: Manual Transmission
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• not for emission standard: L4
• Engine Code: KFX (TU3JP), KFW (TU3JP)
• Cable Length [mm]: 370
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Engine Code: KFX (TU3JP)
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• for manufacturer exhaust norm: EURO2000;CEE2000
• Block Separation:
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

• Engine Code: KFX (TU3JP)
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Emission Standard: CEE 2000
• Block Separation:
• Number of circuits: 4
• Overall Length [mm]: 410
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Emission Standard: Euro 1
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Construction Year from: 01.2000
• Voltage [V]: 12
• Length [mm]: 536
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV062

• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,250
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.181
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 01.2000
• Construction Year to: 06.2003
• Transmission Type: Automatic Transmission
• Emission Standard: L4
• Engine Code: KFX (TU3JP), KFW (TU3JP)
• Cable Length [mm]: 525
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Lambda Sensor: Regulating Probe, Diagnostic Probe, Planar probe, Heated Additional information: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
406 (8B), 10.95-05.0
(kvaliteediklass: PJ)"

• Construction Year to: 01.1998
• Transmission Type: Automatic Transmission
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• for manufacturer exhaust norm: CEE19.5 oder/CEE95, EURO 96/EURO93
• Emission Standard: L3
• Engine Code: KFX (TU3JP)
• for RPO number from: 7725
• Cable Length [mm]: 400
• Manufacturer: DELPHI

• Transmission Type: Manual Transmission
• Emission Standard: Euro 3 (D3)
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 139
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)"

• Resistor [Ohm]: 3.5
• Length [mm]: 570
• Number of circuits: 4
• Conductor Number: 4
• Cable Length [mm]: 570
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year from: 01.2000
• Voltage [V]: 12
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV097
• Manufacturer: ESEN SKV

• Construction Year from: 04.1998
• Construction Year to: 12.2001
• Transmission Type: Automatic Transmission
• Engine Code: KFX (TU3JP), KFW (TU3JP)
• for RPO number from: 7728
• Cable Length [mm]: 380
• Lambda Sensor: Planar probe, Heated
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Lambda Sensor: Regulating Probe, Heated
• Emission Standard: Euro 2
• Cable Length [mm]: 300
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Fitting Position: before catalytic converter, after catalytic converter Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 01.1998
• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-0120
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Construction Year from: 01.1998
• Construction Year to: 07.2003
• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
106 I (1A, 1C), 08.9
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
106 I (1A, 1C), 08.9
(kvaliteediklass: Q)"

• Engine Code: KFX
• Construction Year from: 05.1998
• Lambda Sensor: Diagnostic Probe, Heated, Thread pre-greased
• Emission Standard: Euro 3 (D3)
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 4
• Connector Shape: angular
• Thread Size: 18x1,5
• Length [mm]: 400
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.163
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year from: 01.2000
• Engine Code: TU3JP+
• Voltage [V]: 12
• Length [mm]: 540
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV035
• Manufacturer: ESEN SKV

• Construction Year to: 09.2003
• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Length [mm]: 400
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV687

• Lambda Sensor: Heated
• Thread Size: M18 x 1,5
• Number of pins: 4
• Connector Shape: rectangular
• Overall Length [mm]: 600
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Construction Year from: 01.2000
• Voltage [V]: 12
• Length [mm]: 570
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV703

• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Length [mm]: 410
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV671
• Manufacturer: ESEN SKV

• Engine Code: KFW (TU3JP)
• Construction Year from: 03.2000
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year from: 01.1998
• Transmission Type: Fully Automatic
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 400
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV625
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Emission Standard: Euro 3 (D3)
• Fitting Position: before catalytic converter
• Cable Length [mm]: 530
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Engine Code: KFX (TU3JP)
• Emission Standard: EEC 2000
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Block Separation:
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 570
• Weight [kg]: 0.092
• for OE number: 1618.Z6
• Name: SW 33 10 3089
• Manufacturer: SWAG

Fitting Position: before catalytic converter, after catalytic converter General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cable Length [mm]: 640
• Lambda Sensor: Heated
• Manufacturer: FAST

• Construction Year from: 05.1998
• Lambda Sensor: Diagnostic Probe, Unheated
• Emission Standard: Euro 3 (D3)
• Number of pins: 4
• Cable Length [mm]: 540
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Diagnostic Probe
• Number of pins: 4
• Cable Length [mm]: 480
• Manufacturer: MEAT&DORIA

• Engine Code: KFW
• Construction Year from: 05.1998
• Construction Year to: 07.2003
• Transmission Type: Manual Transmission
• Lambda Sensor: Diagnostic Probe, Heated, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: 18x1,5
• Connector Shape: angular
• Cable Length [mm]: 400
• Conductor Number: 4
• Length [mm]: 630
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.137
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: KFX (TU3JP), KFW (TU3JP)
• Emission Standard: Euro 2, Euro 3
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe, Regulating Probe, Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 565
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV696
• Manufacturer: ESEN SKV

• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: round
• Conductor Number: 4
• Cable Length [mm]: 450
• Thread Size: M18 x 1,5
• Length [mm]: 570
• Version: ZR-PLANAR
• Weight [kg]: 0.143
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: KFX (TU3JP)
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Emission Standard: CEE 2000
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Lambda Sensor: Regulating Probe, Heated
• Emission Standard: Euro 3
• Fitting Position: before catalytic converter
• Cable Length [mm]: 600
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 01.1998
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 450
• Connector Shape: angular
• Conductor Number: 4
• Thread Size: M18 x 1,5
• Cable Length [mm]: 330
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Weight [kg]: 0.13
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Heated, Thread pre-greased
• Emission Standard: Euro 3 (D3)
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Number of circuits: 4
• Socket colour: green
• Connector Shape: rectangular
• Thread Size: M18 x 1,5
• Weight [kg]: 0.138
• for OE number: 96 369 687 80
• Cable Length [mm]: 500
• Length [mm]: 600
• Number of connectors: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.1997
• Engine Code: KFX (TU3JP)
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: KFX (TU3JP)
• Construction Year from: 02.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Transmission Type: Automatic Transmission, Manual Transmission
• Emission Standard: CEE 95 L3, CEE 19-5
• for RPO number from: 7725
• Block Separation:
• Construction Year to: 01.1998
• for RPO number up to: 7724
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Transmission Type: Manual Transmission
• Emission Standard: Euro 3 (D3)
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Fitting Position: Front
• Emission Standard: Euro 1
• Length [mm]: 640
• Number of connectors: 4
• Manufacturer: VERNET

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Emission Standard: Euro 3 (D3)
• Fitting Position: before catalytic converter
• Cable Length [mm]: 540
• Manufacturer: DELPHI
• Name: DE ES20258-12B1

• Engine Code: KFW (TU3JP)
• Construction Year to: 09.2003
• Lambda Sensor: Regulating Probe
• Length [mm]: 450
• Number of pins: 4
• Technical Information Number: Universal 77008
• Manufacturer: FAE

• Engine Code: KFX (TU3JP)
• Fitting Position: before catalytic converter
• Emission Standard: Euro 3
• Switching Capacity [W]: 10
• Length [mm]: 565
• Cable Length [mm]: 570
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Construction Year from: 01.1998
• Construction Year to: 07.2003
• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• for OE number: 16287R
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 545
• Number of pins: 4
• Weight [g]: 102
• Gross Weight [g]: 132
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor

• Transmission Type: Manual Transmission
• Emission Standard: Euro 3 (D3)
• for OE number: 1628NY
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 535
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 130
• Manufacturer: DENSO
• Name: DN DOX-1538
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor

• Lambda Sensor: Diagnostic Probe
• Emission Standard: Euro 3
• Fitting Position: after catalytic converter
• Cable Length [mm]: 570
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Regulating Probe, Heated
• Emission Standard: Euro 1
• Fitting Position: before catalytic converter
• Cable Length [mm]: 390
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Diagnostic Probe, Heated
• Exhaust System: after catalytic converter
• Emission Standard: Euro 3
• Number of pins: 4
• Quality: Zr insulated gnd, OE EQUIVALENT
• Cable Length [mm]: 230
• Manufacturer: MEAT&DORIA