• for RPO number up to: 9792
• Fitting Position: Front Axle Left, Front Axle Right
• Lisainfo: Tie Rod End
• Additional information: Tie Rod End

• Fitting Position: Front Axle, inner
• Weight [kg]: 0.511
• Width [mm]: 36
• Material: Steel
• Height [mm]: 36
• max. length [mm]: 280
• Thread Size 1: M14x1,5
• Thread Size 2: M12x1
• Name: Axial joint left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
CITROEN C15/VISA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
CITROEN C15/VISA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, outer
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Length [mm]: 76
• Cone Size [mm]: 13
• Manufacturer: KAMOKA

• for RPO number from: 9793
• Fitting Position: Front Axle
• Length 1 [mm]: 75
• Length 2 [mm]: 19.5
• Diameter 1 [mm]: 15.5
• Thread Size 1: M14X1.5
• Thread Size 2: M10X1.25
• Name: Tie rod end left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Diameter 1 [mm]: 12
• Length from [mm]: 320
• Thread Size 1: M14X1.5
• Thread Size 2: M14X1.5
• Axle Joint Thread Type: with right-hand thread
• Name: Axial joint left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, outer
• Thread Size: M14X1.5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• for RPO number from: 09793
• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size: M 10 x 1,25 mm
• Tie Rod Thread Size: M 14 x 1,5 mm
• Supplementary Article/Info 2: with nut
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• for OE number: 1607293380
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Length [mm]: 75
• Cone Size [mm]: 14
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, outer
• Thread Size: FM14X1.5 RHT
• Cone Size [mm]: 12.6
• Length [mm]: 76
• Thread Size 2: MM10X1.25 RHT
• paired article number: 230041
• Weight [kg]: 0.311
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• for RPO number up to: 09792
• Fitting Position: Front Axle Right, Front Axle Left
• Tie Rod Thread Size: M 14 x 1,5 mm
• Internal Thread [mm]: M 14 x 1,5
• Supplementary Article/Info 2: with nut
• External Thread [mm]: M 10 x 1,25
• Length [mm]: 74
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for RPO number from: 9793
• Fitting Position: Front Axle Left, Front Axle Right
• Lisainfo: Tie Rod End
• Additional information: Tie Rod End

• Fitting Position: Front Axle Left
• Length [mm]: 74.5
• Cone Size [mm]: 13.6
• Thread Size 1: M10X1,25
• Thread Size 2: M14X1,5
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle Left
• Length [mm]: 76
• Cone Size [mm]: 12.6
• Thread Size 1: M10X1,25
• Thread Size 2: M14X1,5
• Manufacturer: GSP

• Production number to: 9792
• Thread Size: M14x1.5
• Thread Type: with right-hand thread
• Cone Size [mm]: 12.6
• Fitting Position: Front Axle
• Length [mm]: 95
• Width [mm]: 38
• Height [mm]: 73
• Manufacturer: DELPHI

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Inner Tie Rod
• Additional information: Inner Tie Rod

• Fitting Position: Front Axle Left
• Thread Size 1: M14X1,5
• Thread Size 2: M14X1,5
• Manufacturer: GSP ZAWIESZENIE

• for RPO number up to: 9792
• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 75
• Thread Size 1: M14x1.5
• Thread Size 2: M10x1
• Weight [kg]: 0.35
• Name: DY 22-00681
• Manufacturer: DYS

• Vehicle Identification Number (VIN) to: 9792
• Fitting Position: Front Axle both sides
• Internal Thread 1 [mm]: M14x1,5
• External Thread 2 [mm]: M10x1
• Length [mm]: 75
• Weight [kg]: 0.29
• Manufacturer: RTS

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Fitting Position: Front Axle Left, Front Axle Right
• Axle Joint Length [mm]: 302
• Thread Size 1: MM14X1.5 RHT
• Thread Size 2: MM14X1.5 RHT
• paired article number: 240024
• Weight [kg]: 0.551
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle, inner
• Weight [kg]: 0.557
• Width [mm]: 36
• Material: Steel
• Height [mm]: 36
• max. length [mm]: 320
• Thread Size 1: M14x1,5
• Thread Size 2: M14x1,5
• Name: Axial joint left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
C.JUMPY/EXPERT/SCUDO
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
C.JUMPY/EXPERT/SCUDO
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Cone Size [mm]: 12.7
• Length [mm]: 74
• Thread Size: M10 x 1,25, M14 x 1,5
• Name: ALT 79064AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, inner
• Weight [kg]: 0.551
• Width [mm]: 36
• Material: Steel
• Height [mm]: 36
• max. length [mm]: 323
• Thread Size 1: M14x1,5
• Thread Size 2: M14x1,5
• Name: Axial joint left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
FIAT MAREA/MULTIPLA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
FIAT MAREA/MULTIPLA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, outer
• Weight [kg]: 0.311
• Width [mm]: 42
• max. length [mm]: 95
• Height [mm]: 67
• Material: Steel
• Thread Size 1: M10x1,25
• Thread Size 2: M14x1,5
• Name: Tie rod end left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
C.JUMPY/EXPERT/SCUDO
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
C.JUMPY/EXPERT/SCUDO
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Right, Front Axle Left
• Internal Thread [mm]: M14X1,5
• Thread Type: with right-hand thread
• Name: COC 49401466
• Manufacturer: CORTECO

• Vehicle Identification Number (VIN) from: 9793
• Fitting Position: Front Axle both sides
• External Thread 1 [mm]: M14x1,5
• External Thread 2 [mm]: M10x1,25
• Length [mm]: 75
• Weight [kg]: 0.3
• Manufacturer: RTS

• Fitting Position: Front Axle
• for RPO number up to: 9792
• Cone Size [mm]: 12.6
• Thread Size: M14x1,5
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 840092310

• Fitting Position: Front Axle both sides
• Required quantity: 2
• Production number to: 09792
• paired article number: VKDY 313004
• Manufacturer: SKF
• Name: SK VKDY313004

• Vehicle Identification Number (VIN) from: OPR 09793
• Fitting Position: Front Axle, outer
• Weight [kg]: 0.315
• Width [mm]: 43
• max. length [mm]: 96
• Height [mm]: 74
• Material: Steel
• Thread Size 1: M10x1,25
• Thread Size 2: M14x1,5
• Name: Tie rod end left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
CITROEN C8, 02-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
CITROEN C8, 02-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Rod/Strut: Camber Link
• Name: MM SSP1429
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Cone Size [mm]: 13.6, 15.5
• Length [mm]: 75
• Thread Size: M10 x 1,25, M14 x 1,5
• Name: ALT 81192AL
• Manufacturer: ALTE AUTOMOTIVE

• for RPO number up to: 09792
• Supplementary Article/Info 2: with fastening material
• Fitting Position: Front Axle Left, Front Axle Right, outer
• Thread Type: with right-hand thread
• Internal Thread [mm]: M14x1,5
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Length [mm]: 320
• Fitting Position: Front Axle
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Weight [kg]: 0.571
• Width [mm]: 36
• Material: Steel
• Height [mm]: 36
• max. length [mm]: 340
• Thread Size 1: M14x1,5
• Thread Size 2: M14x1,5
• Name: Axial joint left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
PEUGEOT 307 01-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
PEUGEOT 307 01-
(kvaliteediklass: PJ)"

• for RPO number up to: 09792
• Internal Thread Size: M14 x 1,5
• External Thread Size: M12 x 1,25
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.36
• for OE number: 1306003080
• Supplementary Article/Supplementary Info: with lock nut
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size 2: M14x1.5
• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 319
• Width [mm]: 37
• Height [mm]: 37
• Manufacturer: DELPHI
• Name: DE TA1608

• Fitting Position: Front Axle
• Rod/Strut: Camber Link
• Manufacturer: MAGNETI MARELLI
• Name: MM SSP1432

• Fitting Position: Front Axle both sides
• Required quantity: 2
• Production number from: 09793
• paired article number: VKDY 313008
• Manufacturer: SKF
• Name: SK VKDY313008

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size: M14x1
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Fitting Position: Front Axle
• Thread Size 1: M14x1,5 A
• Thread Size 2: M14x1,5 A
• Axle Joint Length [mm]: 310
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle
• External Thread [mm]: M 14 x 1,5
• Name: COC 49399834
• Manufacturer: CORTECO

• Fitting Position: Front Axle both sides
• Required quantity: 2
• paired article number: VKDY 323001
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: SKF
• Name: SK VKDY323001

• for RPO number up to: 09792
• Supplementary Article/Info 2: with fastening material
• Fitting Position: Front Axle Left, Front Axle Right, outer
• Thread Type: with right-hand thread
• Internal Thread [mm]: M14x1,5
• Manufacturer: LEMFORDER
• Name: LMI 1925103

SVHC: No information available, please contact the manufacturer!

• for RPO number from: 09793
• Internal Thread Size: M14 x 1,5
• External Thread Size: M10 x 1,25
• Quality/ Grade: 10
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.31
• Supplementary Article/Supplementary Info: with lock nut
• for OE number: 4059.12
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• for RPO number from: 9793
• Cone Size [mm]: 13.6
• Thread Size: M14x1,5
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 840100310

• Length [mm]: 320
• External Thread Size: M14 x 1,5
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.795
• Supplementary Article/Supplementary Info: with counter nut
• for OE number: 3812.A4
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle both sides
• External Thread 1 [mm]: M14x1,5
• External Thread 2 [mm]: M14x1,5
• Length [mm]: 306
• Weight [kg]: 0.54
• Manufacturer: RTS

• for RPO number from: 09793
• Internal Thread Size: M14 x 1,5
• External Thread Size: M10 x 1,25
• Quality/ Grade: 10
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.31
• for OE number: 4059.12
• Supplementary Article/Supplementary Info: with lock nut
• Name: SW 62 93 9684
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.6
• Axle Joint Thread Type: with right-hand thread
• Thread Size: M14x1,5 / M14x1,5
• Length [mm]: 310
• Required quantity: 2
• Packaging length [cm]: 43.5
• Packaging width [cm]: 7.5
• Packaging height [cm]: 4
• Manufacturer: MONROE

• Fitting Position: Front Axle, outer
• for RPO number from: 9793
• Weight [kg]: 0.3
• Thread Type: with right-hand thread
• Internal Thread [mm]: 14 x 1,5
• Packaging length [cm]: 14.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 5
• Manufacturer: MONROE

• Fitting Position: Front Axle Left, Front Axle Right
• Axle Joint Length [mm]: 320
• External Thread [mm]: M14x1,5
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Axle Joint Length [mm]: 320
• External Thread [mm]: M14x1,5
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!