• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fabrication Number: ESS-BM-002
• Manufacturer: NTY

• Fabrication Number: ECP-CT-011
• Manufacturer: NTY

• Construction Year to: 12.2020
• Manufacturer: BOSCH
• Name: BS 0261231197

• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Number of pins: 3
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: 5FV (EP6CDT)
• Required quantity: 1
• Name: EP 1.957.165
• Manufacturer: EPS

• Construction Year to: 12.2020
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Transmission Type: Manual Transmission
• Transmission ID: MC
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: 5FV (EP6CDT)
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• for article number: 87565E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Engine Code: 5FV (EP6CDT)
• Number of pins: 3
• Sensor Type: Hall Sensor
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. BMW 1 F20 07-
• Manufacturer: BRM

• Quantity: 1
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Overall Length [mm]: 565
• Number of circuits: 4
• Fabrication Number: ESL-CT-011
• Manufacturer: NTY

Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased Fitting Position: before catalytic converter, after catalytic converter

• Length [mm]: 446
• Lambda Sensor: Heated, Thread pre-greased
• Number of circuits: 4
• Fabrication Number: ESL-CT-012
• Manufacturer: NTY
• Name: NTY ESL-CT-012

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA BMW 1 F20 1,6 15-
• Manufacturer: BRM

• Construction Year to: 12.2020
• Manufacturer: BOSCH

• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable, with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 20
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.053
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Alternatively:
• Number of pins: 4
• Alternative Repair Kit: 550859
• Manufacturer: ERA

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Number of pins: 3
• Sensor Type: Hall Sensor
• Manufacturer: FAE

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Construction Year to: 12.2020
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: BOS

• Construction Year to: 12.2020
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 20
• Alternative Repair Kit: 550698
• Manufacturer: ERA

• Quality: IAM
• Manufacturer: METZGER

• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 260
• Manufacturer: FAE

• Number of connectors: 4
• Weight [kg]: 0.2
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 5FV (EP6CDT)
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Construction Year to: 12.2020
• Fitting Position: after catalytic converter
• Lambda Sensor: Finger probe
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Number of connectors: 4
• Weight [kg]: 0.2
• Supplementary Article/Info 2: with seal ring
• Name: SW 20 10 3205
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 536
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV062
• Manufacturer: ESEN SKV

• Engine Code: 5FV
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 4
• Connector Shape: angular
• Thread Size: 18x1,5
• Length [mm]: 400
• Lambda Sensor: Heated, Thread pre-greased
• Number of circuits: 4
• Version: ZR PLANAR
• Weight [kg]: 0.163
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Fitting Position: after catalytic converter
• Cable Length [mm]: 370
• Weight [kg]: 0.1
• Name: LAMBDA ANDUR
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Connector Shape: angular
• Length [mm]: 570
• Thread Size: M18 x 1,5
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Fitting Position: after catalytic converter
• Cable Length [mm]: 370
• Weight [kg]: 0.1
• Name: SW 33 10 4608
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Diagnostic Probe, Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 570
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV703
• Manufacturer: ESEN SKV

• Engine Code: 5FV (EP6CDT)
• Lambda Sensor: Unheated
• Number of pins: 4
• Cable Length [mm]: 540
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Engine Code: 5FV (EP6CDT)
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 450
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.008
• Number of circuits: 4
• Name: EP 1.998.078
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• for OE number: 1618HC, 55353148
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 550
• Number of pins: 4
• Weight [g]: 99
• Gross Weight [g]: 132
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
106 II (1), 04.96-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
106 II (1), 04.96-
(kvaliteediklass: Q)"

• Construction Year to: 12.2020
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: after catalytic converter
• Cable Length [mm]: 450
• Lambda Sensor: Planar probe, Heated
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Engine Code: 5FV (EP6CDT)
• Fitting Position: before catalytic converter
• Required quantity: 1
• Length [mm]: 565
• Cable Length [mm]: 570
• Conductor Number: 4
• Supplementary Article/Info 2: with fastening material
• Available as universal article as well, see article no.: 1.998.240
• Number of circuits: 4
• Name: EP 1.998.246
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Fitting Position: Front
• Exhaust System: after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 640
• Number of connectors: 4
• Manufacturer: VERNET

• Construction Year to: 12.2020
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 565
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Diagnostic Probe, Heated
• Length [mm]: 450
• Number of pins: 4
• Socket colour: blue
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Lambda Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 450
• Name: LAMBDA ANDUR
• Manufacturer: PIE

• Supplementary Article/Info 2: Rubber pedal pad
• Number of mounting bores: 3
• Number of pins: 6
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Vehicle Equipment: for vehicles with cruise control (without brake intervention, for vehicles with start-stop function Transmission Type: 6-Speed Manual Transmission, automatically operated, Automatic Transmission Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Vehicle Equipment: for vehicles without cruise control
• Number of mounting bores: 3
• Number of pins: 6
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission, Manual Transmission Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 6
• Number of mounting bores: 3
• Supplementary Article/Info 2: Rubber pedal pad
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Transmission Type: Automatic Transmission
• for OE number: 1601 CW
• Name: Pedaalikomplekt
• Manufacturer: MD

• Number of pins: 6
• Number of mounting bores: 3
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• for OE number: 1601 CV, 96 714 336 80
• Name: Pedaalikomplekt
• Manufacturer: MD

• for RPO number up to: 15728
• Vehicle Equipment: for vehicles without cruise control
• Number of pins: 6
• Colour: black
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Manufacturer: METZGER