• Inner Diameter [mm]: 66
• Outer Diameter [mm]: 100
• Fabrication Number: AD-KA-324
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: NTY
• Name: NTY AD-KA-324

• Fitting Position: Front Axle Left, Front Axle Right
• Shock Absorber Design: Suspension Strut

Lisainfo: Friction Bearing, suspension strut support mounting Additional information: Friction Bearing, suspension strut support mounting

• Fitting Position: Rear Axle
• for OE number: 516532
• Manufacturer: SASIC

• Fitting Position: Front Axle
• for OE number: 503375
• Name: VEDRUAMORDI TUGILAAGER
• Manufacturer: SAS

• Outer Diameter [mm]: 99
• Height [mm]: 20
• Shock Absorber Design: Suspension Strut
• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 67
• Name: Laager - K„„ndmik PEUGEO
• Manufacturer: MAX

• Supplementary Article/Supplementary Info: without accessories
• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• Inner Diameter [mm]: 63
• Outer Diameter [mm]: 100
• Height [mm]: 20
• Material: Plastic
• for OE number: 7700803635
• Manufacturer: DELLO AUTOMEGA
• Additional information: 110105110 DELLO
• Lisainfo: 110105110 DELLO

• Fitting Position: Front Axle
• for OE number: 7700777654
• Name: Laager - K„„ndmik PEUGEOT
• Manufacturer: SAS

• Fitting Position: Front Axle both sides
• Weight [kg]: 0.13
• Material: Metal
• Inner Diameter [mm]: 65
• Outer Diameter [mm]: 100
• Weight [g]: 130
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: METALCAUCHO

• for DAM number from: 1310088, 14633VG
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Quantity per axle: 2
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN): [S 70613612;]
• Fitting Position: Right, Left, Front Axle
• Inner Diameter 1 [mm]: 65
• Width 1 [mm]: 20
• Outer Diameter 1 [mm]: 100
• Manufacturer: SNR
• Name: SN M259.01
• Additional information: M259.01 SNR
• Lisainfo: M259.01 SNR

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 713039620

• Engine Code: HNZ (EB2DT)
• Height [mm]: 47
• Outer Diameter [mm]: 105
• Material: Rubber/Metal
• Fitting Position: Front Axle, Lower
• Weight [kg]: 0.14
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Name: Vedruamordi tugilaager
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: EB2DT
• Fitting Position: Front Axle
• for DAM number from: 14633VG
• Quantity per axle: 2
• Name: Laager - K„„ndmik RENAULT
• Manufacturer: SKF

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: HNZ (EB2DT)
• Height [mm]: 47
• Outer Diameter [mm]: 105
• Material: Rubber/Metal
• Fitting Position: Front Axle, Lower
• Supplementary Article/Info 2: without ball bearing
• Name: SW 62 94 7358
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.155
• Width [mm]: 20
• Inner Diameter [mm]: 66.5
• Outer Diameter [mm]: 99
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: 3RG

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: JAPKO

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without bearing
• Fabrication Number: AD-CT-010
• Manufacturer: NTY
• Name: NTY AD-CT-010

• Fitting Position: Front Axle
• Lisainfo: Top Strut Mounting
• Additional information: Top Strut Mounting

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Supplementary Article/Info 2: without bearing
• Fabrication Number: AD-CT-018
• Manufacturer: NTY
• Name: NTY AD-CT-018

• Fitting Position: Front Axle
• Weight [g]: 151
• Bearing manufacturer: IMPERGOM
• Thickness [mm]: 20
• Inner Diameter [mm]: 66
• Outer Diameter [mm]: 99
• Name: IM 36231/1
• Manufacturer: ORIGINAL IMPERIUM

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Fitting Position: Front Axle, both sides
• Quality: OE Performance
• Colour: silver
• Weight [g]: 127
• Manufacturer: GATES-ZAWIESZENIE

• Fitting Position: Front Axle
• Inner Diameter [mm]: 66
• Outer Diameter [mm]: 100
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Inner Diameter [mm]: 67
• Outer Diameter [mm]: 99
• Height [mm]: 20
• Shock Absorber Design: Suspension Strut
• Bearing Type: Ball Bearing
• Name: Laager - K„„ndmik PEUGEO
• Manufacturer: MEY

• Fitting Position: Front Axle
• Outer Diameter 2 [mm]: 99.5
• Weight [kg]: 0.17
• Inner Diameter [mm]: 65
• Required quantity: 2
• Outer Diameter 1 [mm]: 71
• Manufacturer: TEDGUM

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without ball bearing
• Height [mm]: 47
• Outer Diameter [mm]: 105
• Material: Rubber/Metal
• Manufacturer: BGA

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: ASHIKA

• Engine Code: HNZ (EB2DT)
• Fitting Position: Front Axle
• Outer Diameter [mm]: 105
• Thickness [mm]: 47
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, both sides
• Quality: OE Performance
• Colour: silver
• Weight [g]: 369
• Manufacturer: GATES

• Thickness [mm]: 20
• Inner Diameter [mm]: 65
• Outer Diameter [mm]: 72, 100
• Material: Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.172
• Name: Laager - K„„ndmik PEUGEOT 307
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 65
• Outer Diameter [mm]: 100, 72
• Material: Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: FAST

• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Supplementary Article/Info 2: without bearing
• Mounting Type: Rubber-Metal Mount
• Manufacturer: METZGER

• for DAM number from: 1310088
• for DAM number to: 1441988
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Supplementary Article/Info 2: without rolling bearing
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thickness [mm]: 20
• Inner Diameter [mm]: 65
• Outer Diameter [mm]: 72, 100
• Material: Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.17
• Name: SW 60 54 0014
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front, both sides
• Quality: OE Performance
• Colour: silver
• Weight [g]: 404
• Manufacturer: GATES-ZAWIESZENIE

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: CORTECO

• Fitting Position: Front Axle
• Name: CFD PK2805
• Manufacturer: DACO

• Fitting Position: Front Axle
• Weight [kg]: 0.148
• Packaging length [cm]: 14.3
• Packaging width [cm]: 4.1
• Packaging height [cm]: 14.3
• Manufacturer: MONROE

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: without accessories
• Technical Information: Suspension bearing only
• Manufacturer: KYB

Name: Laager - K„„ndmik CHEVROLET P. REZZO/ CITROEN AX, BERLINGO, C15, C2, C3 I, C3 II, C3 PICASSO, C3

• Fitting Position: Right, Front Axle
• Height [mm]: 28
• Length [mm]: 136
• Width 1 [mm]: 117
• Manufacturer: SNR
• Name: SN KBLF45

• Weight [kg]: 0.42
• Fitting Position: Front Axle
• Required quantity: 2
• Inner Diameter [mm]: 14
• Manufacturer: TEDGUM

• Fitting Position: Front Axle
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• for OE number: 5033E3
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [g]: 474
• Supplementary Article/Info 2: without bearing
• Inner Diameter [mm]: 14
• Name: IM 31179
• Manufacturer: ORIGINAL IMPERIUM

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Installatsiooni pool: Esisild
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Alternative Repair Kit: 11-14 641 0025
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Laager - K„„ndmik. CITROEN P. C3 II/C3 PICASSO/C4 CACTUS/DS3/208/2008/301 09- !!!BEZ O½YSKA!!!

• Fitting Position: Lower, Front Axle both sides
• Thickness [mm]: 47
• Weight [kg]: 0.13, 0.14
• Material: Metal, Rubber
• Inner Diameter [mm]: 65
• Outer Diameter [mm]: 100, 105
• Weight [g]: 130
• Manufacturer: METALCAUCHO

• Production date to: 01/05/16
• Fitting Position: Front Axle
• for OE number: 5038H4
• Manufacturer: SASIC

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 65
• Outer Diameter [mm]: 100, 72
• Manufacturer: JPN

• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Engine Code: HNZ (EB2DT)
• for RPO number up to: 14419
• Length [mm]: 135
• Width [mm]: 121
• Inner Diameter [mm]: 14
• Height [mm]: 36
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.41
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. CITROEN P. DS3/2008/208 09- !!!BEZ O½YSKA!!!

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Name: Laager - K„„ndmik CITROEN/PEUGEOT/RENAUL
• Manufacturer: SAA

for OE number: 3637192, 5035 19, 5035 23, 5035 27, 5035 58, 5035 63, 54612-1G010, 54612-2C000, 91510633 SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Manufacturer: KAVO PARTS

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Name: Laager - K„„ndmik CITROEN P. AX
• Manufacturer: LMI

for OE number: 3637192, 5035 19, 5035 23, 5035 27, 5035 58, 5035 63, 54612-1G010, 54612-2C000, 91510633 SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle both sides
• Length [mm]: 135.5
• Width [mm]: 120.95
• Height [mm]: 28.3
• Weight [kg]: 0.294
• Material: Rubber/Metal
• Inner Diameter [mm]: 14.25
• Supplementary Article/Info 2: without rolling bearing
• Manufacturer: METALCAUCHO

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Quantity Unit: Set
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MEY

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5038 H4, 5038G6, 96 708 307 80
• Name: Vedruamordi tugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

• Engine Code: EB2DT
• Fitting Position: Front Axle
• Production number to: 14419
• for DAM number from: 1323488
• Quantity per packing unit: 2
• Quantity per axle: 1
• General Information: Twin Pack for axle repair
• Name: Laager - K„„ndmik PEUGEOT 307 - 2SZT!
• Manufacturer: SKF

• for OE number: 9676408280
• Fitting Position: Front Axle
• Material: PU (Polyurethane), Thermoplast
• Weight [g]: 242
• Component Number: 4
• Name: IM 50747
• Manufacturer: ORIGINAL IMPERIUM

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Engine Code: HNZ (EB2DT)
• for RPO number from: 14420
• Length [mm]: 136
• Width [mm]: 122
• Height [mm]: 35
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.37
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Name: Vedruamordi tugilaager
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.59
• Supplementary Article/Info 2: with bearing
• Fitting Position: Front Axle
• Required quantity: 2
• Manufacturer: TEDGUM
• Name: TG TED61865

• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Height of bump stop [mm]: 86
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: KYB

General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Front Axle both sides
• Quantity per axle: 2
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle
• for OE number: 5031F2
• Manufacturer: KAMOKA

• Engine Code: HNZ (EB2DT)
• for RPO number up to: 14419
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.74
• Supplementary Article/Info 2: with fastening material, with ball bearing
• Name: Vedruamordi tugilaager
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: EB2DT
• Fitting Position: Front Axle
• Production number to: 14419
• for DAM number from: 1323488
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Manufacturer: SKF

Name: Laager - K„„ndmik. CITROEN C3 09- DS3 09- L/P Z O½YSKIEM

• Engine Code: EB2DT
• Fitting Position: Front Axle
• Production number from: 14420
• for DAM number from: 1323488
• General Information: SKF recommends always changing in pairs both sides
• Manufacturer: SKF

Name: PODUSZKA AMORT. CITROEN P. C3/DS3 09- LE/PR Z O½YSKIEM

• Fitting Position: Front Axle
• Weight [kg]: 0.36
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Right, Left, Front Axle
• Name: SN KB659.36S
• Manufacturer: SNR

• Engine Code: HNZ (EB2DT)
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Weight [kg]: 0.312
• Supplementary Article/Info 2: with ball bearing
• Name: Vedruamordi tugilaager
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right, Left, Front Axle
• Number of Parts [parts]: 5
• Supplementary Article/Info 2: with rubber mount
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Name: SN KB659.36
• Manufacturer: NTN-SNR

• Engine Code: HNZ (EB2DT)
• for RPO number up to: 14419
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with fastening material, with ball bearing
• Name: SW 62 94 5691
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• for OE number: 503172
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• for OE number: 503173
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5031 F2
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. CITROEN P. C3 II/C3 PICASSO/C4 CACTUS/DS3/208/2008/301 09- !!!Z O½YSKIEM!!!

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5031 F2
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• for OE number: 5035.23
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Name: SE D5-246
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Front Axle Right
• for OE number: 546122C000
• Manufacturer: KAMOKA