• Number of pins: 3
• Fabrication Number: ECP-NS-016
• Manufacturer: NTY

• Weight [kg]: 0.021
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M9T 880
• Name: EP 1.830.337
• Manufacturer: EPS

for article number: 1.880.666, 1.880.703S, 1.880.706, 1.880.710S, 1.880.716, 1.880.718, 1.880.719, 1.880.720, 1.880.737, 1.880.782, 1.880.785, 1.880.883, 7.8916, 1.880.930

• Engine Code: M9T 880
• Manufacturer: FACET

for article number: 7.8666, 7.8703S, 7.8706, 7.8710S, 7.8716, 7.8718, 7.8719, 7.8720, 7.8737, 7.8782, 7.8785, 7.8883, 7.8916, 7.8930

• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV883

Manufacturer: JPN

• Number of pins: 3
• Fabrication Number: ECM-NS-004
• Manufacturer: NTY

• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Weight [kg]: 0.024
• Manufacturer: ERA

• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Manufacturer: BREMI

• Engine Code: M9T 880
• Name: EP 1.953.551
• Manufacturer: EPS

• Engine Code: M9T 880
• Manufacturer: FACET

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Manufacturer: VALEO
• Name: VA 253803

• Pistikkontaktide arv: 3
• Manufacturer: JPN

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 150,000
• for OE number: 208150007R
• Manufacturer: NRF

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Engine Code: M9T 716
• Number of pins: 3
• Pressure from [kPA]: 30
• Pressure to [kPA]: 400
• for OE number: 6000620765
• Manufacturer: MEAT & DORIA

• Engine Code: M9T 880
• Manufacturer: BOSCH
• Name: BS 0986280412

• Engine Code: M9T 880
• Manufacturer: BOSCH
• Name: BS 0281002961

• for OE number: 82 00 974 421
• Number of pins: 3
• Connector Shape: oval
• Socket colour: blue
• Fabrication Number: ECS-RE-001
• Manufacturer: NTY

• Exhaust System: before soot particulate filter
• not for country specific design: Mexico
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP009409461

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: M9T 880
• Number of pins: 3
• Pressure from [kPA]: 50
• Pressure to [kPA]: 350
• Manufacturer: FAE

• Height [mm]: 28.6
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 3
• Fitting Depth [mm]: 28
• Housing Colour: black
• Weight [kg]: 0.024
• Manufacturer: ERA

• Number of pins: 3
• Guarantee: 5 years guarantee
• Name: HU 137422
• Manufacturer: HUECO / HITACHI

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 3
• General Information: Sold in Hitachi brand: printing and packaging
• Name: HI 2507422
• Manufacturer: HITACHI

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV777

• Number of pins: 3
• Pressure from [kPA]: 49
• Manufacturer: DELPHI
• Name: DE PS10210

• Exhaust System: before turbocharger
• Number of pins: 3
• for OE number: 1401000Q0C
• Manufacturer: NRF

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28.6
• Supplementary Article/Info 2: without cable, with seal ring
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Emission Standard: Euro 5
• Number of pins: 3
• Opening pressure [kPa]: 1.1
• Manufacturer: DELPHI
• Name: DE DPS00015

• Engine Code: M9T 880
• Fitting Position: Exhaust Turbocharger
• Number of pins: 2
• Connector Shape: rectangular
• Cable Length [mm]: 215
• Thread Size: M12x1.25
• Manufacturer: METZGER

• Engine Code: M9T 880
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV735

• Construction Year from: 03.2013
• Construction Year to: 09.2015
• Engine Code: M9T.8.80
• Height [mm]: 28
• Number of connectors: 3
• Required quantity: 1
• Supplementary Article/Info 2: for camshaft, without cable, with seal ring
• Colour: black
• Operating Mode: Electric
• Sensor Type: Active sensor, Hall Sensor
• Number of pins: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 28
• Connector Shape: oval
• Number of mounting bores: 1
• Weight [kg]: 0.034
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M9T 880
• Pressure from [kPA]: 31
• Pressure to [kPA]: 372
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Number of pins: 3
• Colour: black
• Pressure [Pa] to: 150,000
• Supplementary Article/Info 2: without connection line
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 4420748, 82 00 916 762
• Number of pins: 2
• Socket colour: grey
• Fabrication Number: EGT-RE-012
• Cable Length [mm]: 400
• Manufacturer: NTY

• Construction Year from: 05.2015
• Construction Year to: 09.2015
• Weight [kg]: 0.07
• Name: VA 369095
• Manufacturer: VALEO

• for OE number: 4406921, 22640 5244R
• Overall Length [mm]: 530
• Number of pins: 2
• Socket colour: brown
• Fabrication Number: EGT-RE-007
• Cable Length [mm]: 400
• Manufacturer: NTY

• Construction Year from: 05.2015
• Construction Year to: 09.2015
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 460
• Overall Length [mm]: 585
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M12 x 1,25
• Spanner Size: 14
• Sensor Type: NTC Sensor
• Weight [kg]: 0.07
• Name: VA 368904
• Manufacturer: VALEO

• Engine Code: M9T 880
• Pressure from [kPA]: 31
• Pressure to [kPA]: 372
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: EPS

• for OE number: 4421234, 82 00 940 349
• Cable Length [mm]: 660
• Number of pins: 2
• Guarantee: 3 years guarantee
• Exhaust System: after soot particulate filter
• Weight [kg]: 0.08
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV373

• Fitting Position: before catalytic converter
• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Spanner Size: 12
• Thread Size: M12x1.25
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Fitting Position: after catalytic converter
• Overall Length [mm]: 530
• Cable Length [mm]: 400
• Number of pins: 2
• Socket colour: brown
• Manufacturer: FAST

• Engine Code: M9T 880
• Voltage [V]: 12
• Cable Length [mm]: 400
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV258

• Number of pins: 3
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: FAST

• Supplementary Article/Info 2: with seal ring, without cable
• Pressure from [kPA]: 31.1
• Pressure to [kPA]: 372
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400751
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV333

• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV334

• Fitting Position: before soot particulate filter
• for OE number: 4423734, 226400467R
• Required quantity: 1
• Quality: OE
• Thread Size: M12x1.25
• Cable Length [mm]: 628
• Sensor Type: NTC Sensor
• Number of pins: 2
• Weight [g]: 44
• Gross Weight [g]: 72
• Name: DN DET-0156
• Manufacturer: DENSO

• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.23
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV229
• Manufacturer: ESEN SKV

• Housing Type: with housing
• Fabrication Number: EPP-PL-022

• Construction Year from: 05.2015
• Construction Year to: 09.2015
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 220
• Overall Length [mm]: 375
• Number of pins: 2
• Connector Shape: oval
• Socket colour: grey
• Thread Size: M12 x 1,25
• Spanner Size: 14
• Sensor Type: NTC Sensor
• Weight [kg]: 0.06
• Manufacturer: VALEO

• Fitting Position: after catalytic converter
• Cable Length [mm]: 460
• Number of pins: 2
• Manufacturer: FAST

• Cable Length [mm]: 430
• Fitting Depth [mm]: 55
• Manufacturer: FAST

• Fitting Position: after soot particulate filter
• Cable Length [mm]: 660
• Number of pins: 2
• Manufacturer: FAST

• Number of pins: 3
• Connector Shape: oval
• Socket colour: blue
• Number of connectors: 1
• Quality: OE EQUIVALENT
• for OE number: 4451570
• Manufacturer: MEAT&DORIA

• Fitting Position: before soot particulate filter
• for OE number: 4420748, 8200916762
• Required quantity: 1
• Quality: OE
• Thread Size: M12x1.25
• Cable Length [mm]: 430
• Sensor Type: NTC Sensor
• Number of pins: 2
• Weight [g]: 36
• Gross Weight [g]: 64
• Manufacturer: DENSO
• Lisainfo: DET-0142 DENSO
• Additional information: DET-0142 DENSO

• Emission Standard: Up to Euro 5
• Number of pins: 3
• Number of connectors: 1
• Supplementary Article/Info 2: without connection line
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Pistikkontaktide arv: 4
• Manufacturer: JPN

• Vehicle Identification Number (VIN) from: 18072011
• Vehicle Identification Number (VIN) to: 17072011
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of connectors: 5
• Manufacturer: VERNET

• Engine Code: M9T 880
• Housing Type: with housing
• Length [mm]: 106
• Inner Diameter [mm]: 80
• Outer Diameter [mm]: 80
• Name: EP 1.991.450
• Manufacturer: EPS

• Engine Code: M9T 880
• Housing Type: with housing
• Length [mm]: 106
• Inner Diameter [mm]: 80
• Outer Diameter [mm]: 80
• Manufacturer: FACET

• Engine Code: M9T 880
• Vehicle Identification Number (VIN) from: 18072011
• Vehicle Identification Number (VIN) to: 17072011
• Fitting Position: before catalytic converter
• Cable Length [mm]: 350
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.389
• Manufacturer: EPS

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Engine Code: M9T 880
• Vehicle Identification Number (VIN) from: 18072011
• Vehicle Identification Number (VIN) to: 17072011
• Fitting Position: before catalytic converter
• Cable Length [mm]: 350
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Broadband oxygen sensor, Thread pre-greased

• Number of pins: 3
• Connector Shape: oval
• Number of connectors: 1
• for OE number: 8200974421
• Manufacturer: MEAT&DORIA

• Engine Code: M9T 880
• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: BOSCH

• Engine Code: M9T 880
• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe, Planar probe
• Cable Length [mm]: 190
• Length [mm]: 330
• Number of circuits: 5
• Manufacturer: METZGER

• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10628-12B1

• Construction Year from: 03.2013
• Construction Year to: 09.2015
• Engine Code: M9T.8.80
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 350
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Weight [kg]: 0.14
• Manufacturer: VALEO
• Name: VA 368418

Oxygen Sensor: Planar probe, Broadband oxygen sensor, Thread pre-greased, Heated

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Manufacturer: BREMI

• Engine Code: M9T 880
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Mounting Type: Pipe-neck
• Number of pins: 4
• Pipe socket mounting diameter [mm]: 80
• Suction pipe connector diameter [mm]: 80
• Supplementary Article/Supplementary Info: without fastening/mounting material
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET358095181

Brief Information: *** HELLA Electronics OE competence for over 60 years.