• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 305
• Brake Disc Thickness [mm]: 12
• Number of Holes: 5
• Surface: Coated

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 302
• Brake Disc Thickness [mm]: 28
• Number of Holes: 5
• Surface: Coated

• Quantity per packing unit: 2
• Brake Disc Hub Height [mm]: 59.4
• Fitting Position: Rear Axle
• Centering Diameter [mm]: 90
• Rim Hole Number: 5
• Height [mm]: 71.4
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Outer Diameter [mm]: 305
• Bolt Hole Circle Ø [mm]: 130
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 305
• Brake Disc Thickness [mm]: 12
• Number of Holes: 5

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 71
• Outer Diameter [mm]: 305
• Centering Diameter [mm]: 90
• Brake Disc Thickness [mm]: 12
• Manufacturer: KAMOKA
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• Minimum thickness [mm]: 10
• Brake Disc Type: solid
• Bore Diameter [mm]: 15.5
• Brake Disc Thickness [mm]: 12
• Bolt Hole Circle Ø [mm]: 130
• Number of Holes: 5
• Inner Diameter [mm]: 167
• Height [mm]: 71.4
• Centering Diameter [mm]: 90
• Outer Diameter [mm]: 305
• Manufacturer: DENCKERMANN HAMULCE
• Quantity per packing unit: 2

• Construction Year from: 03.2013
• Construction Year to: 10.2021
• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Surface: Coated
• Outer Diameter [mm]: 305
• Brake Disc Thickness [mm]: 12
• Centering Diameter [mm]: 90
• Height [mm]: 71.5
• Minimum thickness [mm]: 10
• Rim Hole Number: 5
• Number of mounting bores: 1
• Supplementary Article/Info 2: without integrated wheel bearing
• Test Mark: ECE-R90
• Weight [kg]: 13.38
• Manufacturer: VALEO TARCZE

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 305
• Brake Disc Thickness [mm]: 12
• Height [mm]: 71.5
• Rim Hole Number: 5
• Brake Disc Type: solid
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Hub Diameter [mm]: 179
• Weight [kg]: 6.46
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Test Mark: R90
• Height [mm]: 72
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Outer Diameter [mm]: 305
• Number of Holes: 5
• Centering Diameter [mm]: 90
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Manufacturer: KAVO
• Quantity per packing unit: 2

• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Outer Diameter [mm]: 305
• Height [mm]: 71.5
• Number of Holes: 5
• Centering Diameter [mm]: 90
• Bolt Hole Circle Ø [mm]: 130
• Surface: Painted
• Weight [kg]: 13.65
• Minimum thickness [mm]: 10
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Test Mark: ECE-R90
• Height [mm]: 71.5
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Outer Diameter [mm]: 305
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 90
• Surface: Painted
• Manufacturer: METELLI UKL.HAMULCOWY

• Brake Disc Thickness [mm]: 12
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 71.5
• Outer Diameter [mm]: 305
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 10
• Centering Diameter [mm]: 90
• Weight [kg]: 6.42
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Brake Disc Thickness [mm]: 12
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 72
• Outer Diameter [mm]: 305
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 10
• Centering Diameter [mm]: 90
• Weight [kg]: 6.42
• Observe service information:
• Manufacturer: BLUE PRINT
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Height [mm]: 69.8
• Brake Disc Thickness [mm]: 28
• Outer Diameter [mm]: 302
• Number of Holes: 5
• Centering Diameter [mm]: 90
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 5
• Test Mark: E4 90R-02C0703/2622
• Surface: Oiled
• Outer Diameter [mm]: 305
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Centering Diameter [mm]: 90
• Height [mm]: 71.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG4320

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 305
• Brake Disc Thickness [mm]: 12
• Height [mm]: 71.5
• Rim Hole Number: 5
• Brake Disc Type: solid
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Hub Diameter [mm]: 185
• Weight [kg]: 6.72
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 302
• Brake Disc Thickness [mm]: 28
• Brake Disc Type: Vented
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 69.9
• Centering Diameter [mm]: 90
• Test Mark: ECE R90
• Replace in pairs only:
• Required quantity: 2
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Surface: Coated
• Outer Diameter [mm]: 305
• Hub Diameter [mm]: 179.2
• Centering Diameter [mm]: 90
• Brake Disc Thickness [mm]: 12
• Height [mm]: 71.5
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 130
• Replace in pairs only:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Outer Diameter [mm]: 305
• Weight [kg]: 6.58
• Height [mm]: 71.5
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 90
• Surface: Coated
• Minimum thickness [mm]: 10
• Bore Diameter up to [mm]: 15.5
• Name: ALT 128024FCAL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Height [mm]: 71.5
• Outer Diameter [mm]: 305
• Manufacturer: FAST

• Brake Disc Thickness [mm]: 28
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 70
• Outer Diameter [mm]: 302
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 24.5
• Centering Diameter [mm]: 90
• Weight [kg]: 9.6
• Observe service information:
• Manufacturer: FEBI HAMULCE
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 70
• Outer Diameter [mm]: 302
• Centering Diameter [mm]: 90
• Brake Disc Thickness [mm]: 28
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Diameter [mm]: 305
• Height [mm]: 71.5
• Minimum thickness [mm]: 10.5
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 90
• Brake Disc Thickness [mm]: 12
• Outer Diameter [mm]: 305
• Manufacturer: MAGNETI MARELLI

• Engine Code: M9T 880
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 304.9
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Height [mm]: 71.5
• Bolt Hole Circle Ø [mm]: 130
• Brake Disc Type: solid
• Centering Diameter [mm]: 90
• Number of Holes: 5
• Surface: Coated
• Machining: Alloyed/High-carbon
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 15.5
• Manufacturer: BOSCH
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Height [mm]: 71.5
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Number of bores: 1
• Outer Diameter [mm]: 305
• Number of Holes: 5
• Centering Diameter [mm]: 90
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Name: SK VKBD90048S2
• Manufacturer: SKF

• Fitting Position: Front Axle
• Outer Diameter [mm]: 302
• Height [mm]: 70
• Centering Diameter [mm]: 90
• Number of Holes: 5
• Minimum thickness [mm]: 24.5
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 28
• Manufacturer: LPR

• Brake Disc Thickness [mm]: 28
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 70
• Outer Diameter [mm]: 302
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 24.5
• Centering Diameter [mm]: 90
• Weight [kg]: 9.6
• Name: SW 60 93 9346
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Outer Diameter [mm]: 302
• Height [mm]: 69.8
• Number of Holes: 5
• Centering Diameter [mm]: 90
• Bolt Hole Circle Ø [mm]: 130
• Surface: Painted
• Weight [kg]: 19.5
• Minimum thickness [mm]: 24.5
• Manufacturer: TOMEX BRAKES

• Brake Disc Thickness [mm]: 28
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 70
• Outer Diameter [mm]: 302
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 24.5
• Centering Diameter [mm]: 90
• Weight [kg]: 9.6
• Observe service information:
• Manufacturer: BLUE PRINT
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Outer Diameter [mm]: 302
• Weight [kg]: 9.261
• Height [mm]: 70
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 90
• Surface: Coated
• Minimum thickness [mm]: 24.5
• Bore Diameter up to [mm]: 17.65
• Name: ALT 128044FCAL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Test Mark: ECE-R90
• Height [mm]: 73.3
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Outer Diameter [mm]: 305
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 91
• Surface: Painted
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Test Mark: ECE-R90
• Height [mm]: 70
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Outer Diameter [mm]: 302
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 90
• Surface: Painted
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Surface: Coated
• Outer Diameter [mm]: 305
• Brake Disc Thickness [mm]: 12
• Height [mm]: 72
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 90
• Test Mark: ECE R90 APPROVED
• Registration Type: permitted for vehicles of Class M1/N1
• Minimum thickness [mm]: 10.5
• Weight [kg]: 6.4
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Height [mm]: 69.8
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 24.5
• Number of bores: 1
• Outer Diameter [mm]: 302
• Number of Holes: 5
• Centering Diameter [mm]: 90
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Name: SK VKBD80035V1
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 305
• Brake Disc Thickness [mm]: 12
• Height [mm]: 71.5
• Minimum thickness [mm]: 10
• Machining: High-carbon
• Surface: Coated
• Inner Diameter [mm]: 167
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 90
• Hole Arrangement/Number: 05/06
• Wheel Bolt Bore Diameter [mm]: 15.5
• Weight [kg]: 6.4
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DD355129201
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Outer Diameter [mm]: 302
• Brake Disc Thickness [mm]: 28
• Height [mm]: 69.8
• Rim Hole Number: 5
• Brake Disc Type: Vented
• Bolt Hole Circle Ø [mm]: 130
• Surface: Coated
• Hub Diameter [mm]: 174
• Weight [kg]: 9.28
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Number of Holes: 5
• Test Mark: E4 90R-02C0703/2629
• Surface: Oiled
• Outer Diameter [mm]: 302
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 24.5
• Centering Diameter [mm]: 90
• Height [mm]: 69.8
• Name: DE BG4328
• Manufacturer: DELPHI

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 72
• Centering Diameter [mm]: 90
• Outer Diameter [mm]: 305
• Machining: High-carbon
• Minimum thickness [mm]: 10.5
• Manufacturer: BREMBO
• Name: BR 08.B829.10
• Quality class: Q

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 72
• Centering Diameter [mm]: 91
• Outer Diameter [mm]: 305
• Minimum thickness [mm]: 10
• Name: BR 08.A651.10
• Manufacturer: BREMBO
• Quality class: Q

• Engine Code: M9T 880
• Fitting Position: Front Axle
• Outer Diameter [mm]: 302
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 24.5
• Height [mm]: 69.9
• Bolt Hole Circle Ø [mm]: 130
• Brake Disc Type: Vented, internally vented
• Centering Diameter [mm]: 90
• Number of Holes: 5
• Surface: Coated
• Machining: High-carbon
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 17.5
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 302
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 24.5
• Number of Holes: 5
• Height [mm]: 69.8
• Centering Diameter [mm]: 90
• Bolt Hole Circle Ø [mm]: 130
• Thread Size: 17,5
• Colour: black
• Surface: Painted
• Machining: High-carbon
• Test Mark: E1 90R-02 C0176/0642
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 305
• Brake Disc Thickness [mm]: 12
• Height [mm]: 71.5
• Minimum thickness [mm]: 10
• Inner Diameter [mm]: 167
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 90
• Hole Arrangement/Number: 05/06
• Wheel Bolt Bore Diameter [mm]: 15.5
• Packaging length [cm]: 32.8
• Packaging width [cm]: 32.8
• Packaging height [cm]: 17.9
• Weight [kg]: 6.4
• Manufacturer: TEXTAR TARCZE HAMULCOWE

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Height [mm]: 69.8
• Outer Diameter [mm]: 302
• Manufacturer: FAST

• Quantity per packing unit: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Brake Disc Type: internally vented
• Surface: Painted, Cross-hatch
• Outer Diameter [mm]: 302
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 24.5
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 69.9
• Centering Diameter [mm]: 90
• Inner Diameter [mm]: 160.5
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Test Mark: R90 Homologated
• Height [mm]: 71.6
• Weight [kg]: 14
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Hole Arrangement/Number: 5+1
• Outer Diameter [mm]: 305
• Number of Holes: 5
• Centering Diameter [mm]: 90
• Surface: Coated
• Packing Type: Box
• Quantity Unit: Set
• Supplementary Article/Info 2: with bolts/screws
• Version: JC
• Packaging length [cm]: 32
• Packaging width [cm]: 32
• Packaging height [cm]: 18
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 305
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Brake Disc Type: solid
• Machining: Alloyed/High-carbon
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 71.4
• Centering Diameter [mm]: 90
• Inner Diameter [mm]: 167
• Bore Diameter [mm]: 15.5
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0165/1116
• Manufacturer: ATE
• Quality class: Q
• Name: Brake discs

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 302
• Brake Disc Thickness [mm]: 28
• Height [mm]: 70
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 90
• Test Mark: ECE R90 APPROVED
• Registration Type: permitted for vehicles of Class M1/N1
• Minimum thickness [mm]: 24.5
• Weight [kg]: 9.3
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 302
• Brake Disc Thickness [mm]: 28
• Height [mm]: 69.8
• Minimum thickness [mm]: 24.5
• Inner Diameter [mm]: 161
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 90
• Hole Arrangement/Number: 05/06
• Wheel Bolt Bore Diameter [mm]: 17.5
• Weight [kg]: 9.2
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DD355117121
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 28
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 70
• Centering Diameter [mm]: 90
• Outer Diameter [mm]: 302
• Machining: High-carbon
• Minimum thickness [mm]: 24.5
• Manufacturer: BREMBO
• Name: BR 09.B633.10
• Quantity per packing unit: 2
• Quality class: Q

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 302
• Brake Disc Thickness [mm]: 28
• Height [mm]: 69.8
• Minimum thickness [mm]: 24.5
• Surface: Coated
• Inner Diameter [mm]: 161
• Bolt Hole Circle Ø [mm]: 130
• Centering Diameter [mm]: 90
• Hole Arrangement/Number: 05/06
• Wheel Bolt Bore Diameter [mm]: 17.5
• Packaging length [cm]: 32.8
• Packaging width [cm]: 32.8
• Packaging height [cm]: 17.9
• Weight [kg]: 9.2
• Manufacturer: TEXTAR TARCZE HAMULCOWE
• Quality class: Q
• Name: Brake discs

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Outer Diameter [mm]: 302
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 24.5
• Brake Disc Type: Vented
• Surface: Coated
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 130
• Height [mm]: 69.9
• Centering Diameter [mm]: 90
• Inner Diameter [mm]: 160.5
• Bore Diameter [mm]: 17.4
• Test Mark: E1 90R-02C0115/0884
• Manufacturer: ATE
• Quantity per packing unit: 2
• Quality class: Q
• Name: Brake discs

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Height [mm]: 69.8
• Brake Disc Thickness [mm]: 28
• Thread Size: 17,5
• Minimum thickness [mm]: 24.5
• Outer Diameter [mm]: 302
• Number of Holes: 5
• Centering Diameter [mm]: 90
• Bolt Hole Circle Ø [mm]: 130
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle
• Test Mark: R90 Homologated
• Height [mm]: 70
• Weight [kg]: 19.7
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 24.5
• Hole Arrangement/Number: 5+1
• Outer Diameter [mm]: 302
• Number of Holes: 5
• Centering Diameter [mm]: 90
• Surface: Coated
• Packing Type: Box
• Quantity Unit: Piece
• Supplementary Article/Info 2: with bolts/screws
• Version: JC
• Packaging length [cm]: 31.5
• Packaging width [cm]: 31.5
• Packaging height [cm]: 9
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Engine Code: M9T 880
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 5
• Machining: Alloyed/High-carbon
• Outer Diameter [mm]: 305
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Centering Diameter [mm]: 90
• Height [mm]: 72
• Bolt Hole Circle Ø [mm]: 130
• Bore Diameter up to [mm]: 15.5
• Quality class: PJ
• Name: Brake discs

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Engine Code: M9T 880
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Number of Holes: 5
• Machining: High-carbon
• Outer Diameter [mm]: 302
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 24.5
• Centering Diameter [mm]: 90
• Height [mm]: 70
• Bolt Hole Circle Ø [mm]: 130
• Bore Diameter up to [mm]: 17.5
• Quality class: PJ
• Name: Brake discs

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"