Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Tyres: for single tyres
- Fitting Position: Rear Axle
- Brake System: Brembo
- Height [mm]: 59.5
- Width [mm]: 129
- Thickness [mm]: 18.4
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length [mm]: 328
-
Lisainfo: Brake Pad Set,
disc brake -
Additional information: Brake Pad Set,
disc brake
- Fitting Position: Front Axle
- Brake System: Brembo
- Height [mm]: 64.5
- Width [mm]: 164
- Thickness [mm]: 18
- Wear Warning Contact: with integrated wear warning contact
- Manufacturer: JP GROUP
-
Lisainfo: Brake Pad Set,
disc brake -
Additional information: Brake Pad Set,
disc brake
- Filtritüüp: Filtrer
-
OE-numbri jaoks: 16405-
00Q0B - Kõrgus (mm): 120
- Kütuseliik: Diisel
- Välisläbimõõt [mm]: 71
- Manufacturer: KAMOKA
- Height [mm]: 123
- Outer Diameter [mm]: 70
- Filter type: Filter Insert
- Inner Diameter 1 [mm]: 20
- Inner Diameter 2 [mm]: 20
- Manufacturer: KAVO PARTS
- Filter type: Filter Insert
- Height [mm]: 100.5
- Overall Height [mm]: 109.5
- Inner Diameter [mm]: 11
- Inner Diameter 1 [mm]: 31
- Outer Diameter [mm]: 84
- for OE number: 6000619764
- Manufacturer: ASHIKA
-
Lisainfo: 30-
ECO091 -
Additional information: 30-
ECO091
- Filtritüüp: Filtrer
- Kõrgus (mm): 141
- Kütuseliik: Diisel
- Välisläbimõõt [mm]: 89
- Manufacturer: KAMOKA
- Additional information: F320601 KAMOKA
- Lisainfo: F320601 KAMOKA
- Filter type: Filter Insert
- Height [mm]: 142
- Outer Diameter [mm]: 89
- Outer Diameter 1 [mm]: 32
- Manufacturer: DENCKERMANN FILTRY
- Filter type: Filter Insert
- Height [mm]: 141
- Manufacturer: FAST
- Outer Diameter [mm]: 84.5
- Height [mm]: 141.8
- Filter type: Filter Insert
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Height [mm]: 143
- Outer Diameter [mm]: 89
-
Filter type: In-
Line Filter - Manufacturer: KAVO PARTS
- OE-numbri jaoks: 447 477 0000 n.cpl.1
- Filtritüüp: Filtrer
-
Piirangutega toode/piirangu info: koos paigaldus-
/ kinnitusmaterjaliga - Manufacturer: TRUCKTEC
- Filter type: Filter Insert
- Height [mm]: 145
- Outer Diameter [mm]: 84
- Weight [kg]: 0.208
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Observe service information:
- Manufacturer: BLUE PRINT
- Additional information: ADN12350
- Lisainfo: ADN12350
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filter type: Filter Insert
- Inlet Ø [mm]: 28
- Height [mm]: 113
- Diameter [mm]: 86.4
- Outer Diameter 1 [mm]: 88
- Name: BM FE0337
- Manufacturer: BREMSI
- Filtritüüp: Filtrer
- Kõrgus (mm): 145
- Välisläbimõõt [mm]: 84
-
Kaal (kg): 0,
208 -
Piirangutega toode/piirangu info: koos paigaldus-
/ kinnitusmaterjaliga - Hooldusinfot jälgida:
- Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Tyres: for single tyres
- Brake System: Brembo
- Number of wear indicators [per axle]: 2
- Width 1 [mm]: 128.5
- Height [mm]: 59.5
- Thickness [mm]: 18.4
- Warning Contact Length [mm]: 328
- Test Mark: ECE R90
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Front Axle
- Length [mm]: 164
- Height [mm]: 67
- Thickness [mm]: 18
- Test Mark: ECE R90 APPROVED
-
WVA Number: 25147,
25165 - for OE number: 4106000Q0L
- Manufacturer: ASHIKA
- Tyres: for single tyres
- Fitting Position: Rear Axle
- Width [mm]: 128.5
- Thickness [mm]: 18.4
- Height [mm]: 59.5
- Wear Warning Contact: incl. wear warning contact
- Brake System: Brembo
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Filter type: Filter Insert
- Outer Diameter 1 [mm]: 89
- Inner Diameter 1 [mm]: 32
- Height [mm]: 142
- Manufacturer: KOLBENSCHMIDT
- Filter type: Filter Insert
- Height [mm]: 144
- Outer Diameter [mm]: 84
- Outer Diameter 1 [mm]: 32
- Manufacturer: PROFIPOWER
- Tyres: with single tyres
- Fitting Position: Rear Axle
- Height [mm]: 59.4
- Thickness [mm]: 18.1
- Wear Warning Contact: with integrated wear warning contact
- Number of wear indicators [per axle]: 1
- Brake System: Brembo
- Length 1 [mm]: 128.7
-
WVA Number: 25112,
25113 - for OE number: 4406000Q0H
- Manufacturer: ASHIKA
-
Lisainfo: 51-
01- 108 -
Additional information: 51-
01- 108
- Filter type: Filter Insert
- Diameter [mm]: 89.2
- Height [mm]: 141.8
- Inner Diameter 2 [mm]: 32
- Housing Type: for housing with screwed lid
- Manufacturer Restriction: MAHLE
- Net Weight [g]: 162
- Packaging height [cm]: 18
- Packaging length [cm]: 9.5
- Packaging width [cm]: 9.5
-
Name: KN KX338/
22D - Manufacturer: KNECHT
- Fitting Position: Rear Axle
- Width [mm]: 164
- Thickness [mm]: 18
- Height [mm]: 62
- Number of wear indicators [per axle]: 2
- Wear Warning Contact: incl. wear warning contact
- Brake System: Brembo
- Warning Contact Length [mm]: 303
- Manufacturer: KAMOKA
- Filter type: Filter Insert
- Diameter [mm]: 89.2
- Height [mm]: 141.8
- Inner Diameter 2 [mm]: 32
- Housing Type: for housing with screwed lid
- Manufacturer Restriction: MAHLE
- Net Weight [g]: 162
- Packaging height [cm]: 18
- Packaging length [cm]: 9.5
- Packaging width [cm]: 9.5
- Manufacturer: MAHLE KNECHT
-
Lisainfo: KX 338/
22D MAH -
Additional information: KX 338/
22D MAH
- Fitting Position: Rear Axle
- Width [mm]: 129
- Thickness [mm]: 18
- Height [mm]: 60
- Number of wear indicators [per axle]: 2
- Wear Warning Contact: incl. wear warning contact
- Brake System: Bosch
- Warning Contact Length [mm]: 328
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Manufacturer Restriction: MAHLE
- Housing Type: for housing with screwed lid
- Filtritüüp: Filtrer
- Kõrgus (mm): 143
- Siseläbimõõt [mm]: 32
- Välisläbimõõt [mm]: 89
- SVHC: SVHS aineid ei esine
- Manufacturer: FILTRON
- Filter type: Filter Insert
- Outer Diameter [mm]: 89
- Inner Diameter [mm]: 32
- Height [mm]: 142
- Manufacturer: HENGST FILTER
- Fitting Position: Rear Axle
- Tyres: for dual tyres
- Brake System: Brembo
- Number of wear indicators [per axle]: 2
- Width 1 [mm]: 163.5
- Height [mm]: 62.9
- Thickness [mm]: 18.4
- Warning Contact Length [mm]: 303
- Test Mark: ECE R90
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Front Axle
- Brake System: Brembo
- Number of wear indicators [per axle]: 2
- Width 1 [mm]: 163.5
- Height [mm]: 64.6
- Thickness [mm]: 18.4
- Warning Contact Length [mm]: 110
- Test Mark: ECE R90
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Rear Axle
- Tyres: for single tyres
- Kulumishoiatus kontakt: koos kulumianduriga
- Tootja piirang: TRW
-
Jämedus/Tugevus (mm): 18,
3 -
Pikkus (mm): 128,
6 -
Kõrgus (mm): 59,
8 - Kulumisnäidikute arv [ühe telje kohta]: 1
- Hoiatuskontakti pikkus (mm): 335
- Manufacturer: JPN
- Fitting Position: Rear Axle
- Tyres: for dual tyres
- Kulumishoiatus kontakt: koos integreeritud kulumianduriga
-
Kõrgus 1 (mm): 63,
1 -
Laius 1 (mm): 163,
9 -
Jämedus/Tugevus 1 (mm): 18,
1 - Manufacturer: JPN
- Construction Year from: 09.2014
- Filter type: Filter Insert
- Diameter [mm]: 89.2
- Outer Diameter 1 [mm]: 32
- Height [mm]: 141.8
- Manufacturer: BOSCH
- Name: BS F026402857
- Fitting Position: Front Axle
- Width [mm]: 164
- Thickness [mm]: 18
- Height [mm]: 65
- Number of wear indicators [per axle]: 2
- Wear Warning Contact: incl. wear warning contact
- Brake System: Brembo
- Warning Contact Length [mm]: 110
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Manufacturer Restriction: MAHLE
- Housing Type: for housing with screwed lid
-
ELi tooteohutuse määrus (GPSR): IEC 60417-
6183 nõutavad mehaanikaalased teadmised - Filtritüüp: Filtrer
- Piirangutega toode/piirangu info: koos tihendiga
- Kõrgus (mm): 144
- Välisläbimõõt [mm]: 84
- Välisläbimõõt 1 [mm]: 32
- SVHC: SVHS aineid ei esine
- Manufacturer: MANN+HUMMEL
- Fitting Position: Rear Axle
- Tyres: for dual tyres
- Kulumishoiatus kontakt: koos integreeritud kulumianduriga
-
Kõrgus 1 (mm): 63,
1 -
Laius 1 (mm): 163,
9 -
Jämedus/Tugevus 1 (mm): 18,
1 - Manufacturer: PROFIPOWER
- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 305
- Thickness [mm]: 18
- Test Mark: R90
- Width [mm]: 129
- Height [mm]: 60
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length [mm]: 330
- Manufacturer: KAVO PARTS
- Wear Warning Contact: with integrated wear sensor
- Fitting Position: Rear Axle
- Height 1 [mm]: 59.8
- Warning Contact Length [mm]: 325
- Width 1 [mm]: 128.6
- Thickness 1 [mm]: 18.3
- Manufacturer: PROFIPOWER
- Fitting Position: Rear Axle
- Thickness [mm]: 18
- Height [mm]: 59
- Number of wear indicators [per axle]: 1
- Wear Warning Contact: with integrated wear sensor
- Warning Contact Length [mm]: 320
- Manufacturer: FAST
General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu
- Tyres: with dual tyres
- Fitting Position: Rear Axle
- Length [mm]: 163.6
- Height 1 [mm]: 62.9
- Wear Warning Contact: incl. wear warning contact
- Brake System: Brembo
-
WVA Number: 25172,
25173 - for OE number: 4406000Q0G
- Manufacturer: ASHIKA
- Tyres: for dual tyres
- Fitting Position: Rear Axle
- Width [mm]: 163.5
- Thickness [mm]: 18.4
- Height [mm]: 62.9
- Wear Warning Contact: incl. wear warning contact
- Brake System: Brembo
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Tyres: with dual tyres
- Fitting Position: Rear Axle
- Length [mm]: 163.6
- Height 1 [mm]: 62.9
- Wear Warning Contact: incl. wear warning contact
- Brake System: Brembo
-
WVA Number: 25172,
25173 - for OE number: 4406000Q0G
- Manufacturer: JAPKO
- Fitting Position: Front Axle
- Wear Warning Contact: with integrated wear sensor
- Height 1 [mm]: 64.5
- Brake System: BREMBO
- Width 1 [mm]: 163.9
- Thickness 1 [mm]: 18.2
- Manufacturer: JPN
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: TRW
- Width [mm]: 128.6
- Height [mm]: 59.8
- Thickness [mm]: 18.3
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- Warning Contact Length [mm]: 335
-
Manufacturer: AUTO-
GH
- Fitting Position: Front Axle
- Width [mm]: 163.5
- Thickness [mm]: 18.4
- Height [mm]: 64.6
- Wear Warning Contact: incl. wear warning contact
- Brake System: Brembo
- Manufacturer: DENCKERMANN ZAWIESZENIE
-
Vehicle type: 2.8T,
3.3T, 3.5T - Brake System: Brembo
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
-
Test Mark: ECE-
R90 - Height 1 [mm]: 59.5
- Wear Warning Contact: incl. wear warning contact
- Vibration: with vibration damper
- Width 1 [mm]: 128.5
- Thickness 1 [mm]: 18
- Manufacturer: METELLI UKL.HAMULCOWY
-
Fitting Position: Front Axle,
Rear Axle -
for brake disc diameter [mm]: 302,
305 - Brake System: BREMBO
- Width [mm]: 129
- Height [mm]: 59
- Thickness [mm]: 18
- Number of wear indicators [per axle]: 1
-
Supplementary Article/Info 2: with anti-
squeak plate -
Test Mark: ECE-
R90 - WVA Number: 25112
-
FMSI Code: D1985-
9213 - Weight [kg]: 1.66
- Manufacturer: VALEO
- Name: VA 302407
Wear Warning Contact: with integrated wear sensor, with integrated wear warning contact
- Length [mm]: 128.4
- Width [mm]: 59.2
- Test Mark: ECE R90 Approved
- Fitting Position: Rear Axle
- Thickness 1 [mm]: 17
- Wear Warning Contact: incl. wear warning contact
- Weight [kg]: 1.826
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Equipment Line/Variant: Mahle
- Filter type: Filter Insert
- Height [mm]: 142
- Outer Diameter [mm]: 81
- Inner Diameter [mm]: 11
- Diameter 3 [mm]: 87
- Quality class: PJ
- Name: Fuel filter
Lisainfo: "Tootja: COOPERSFIAAM FILTERS
(kvaliteediklass: PJ)"
Additional information: "Tootja: COOPERSFIAAM FILTERS
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 302
- Thickness [mm]: 18
- Test Mark: R90
- Width [mm]: 164
- Height [mm]: 65
- Wear Warning Contact: with integrated wear sensor
- Warning Contact Length [mm]: 120
- Manufacturer: KAVO PARTS
- Fitting Position: Rear Axle
- Thickness [mm]: 18.3
- Height [mm]: 59.8
- Manufacturer: FAST
General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu
- Vehicle Equipment Line/Variant: Mahle
- Filtritüüp: Filtrer
- Kõrgus (mm): 142
- Välisläbimõõt [mm]: 81
- Siseläbimõõt [mm]: 11
- Läbimõõt 3 (mm): 87
- Manufacturer: PURFLUX
- Fitting Position: Front Axle
- Wear Warning Contact: with integrated wear sensor
- Height 1 [mm]: 64.5
- Brake System: BREMBO
- Width 1 [mm]: 163.9
- Thickness 1 [mm]: 18.2
- Manufacturer: PROFIPOWER
-
Filter type: In-
Line Filter - Height [mm]: 184
- Outer Diameter [mm]: 90
- Hydraulic connector diameter [mm]: 10
- for OE number: A0000900100
- Manufacturer: JAPKO
- Additional information: NRF30139
- Lisainfo: NRF30139
- Length [mm]: 128
- Width [mm]: 59
- Test Mark: ECE R90 Approved
- Fitting Position: Rear Axle
- Thickness 1 [mm]: 17
- Wear Warning Contact: incl. wear warning contact
- Weight [kg]: 1.826
- Observe service information:
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for brake disc diameter [mm]: 302
- Fitting Position: Front Axle
- Brake System: BREMBO
- Width [mm]: 164
- Height [mm]: 65
- Thickness [mm]: 18
- Number of wear indicators [per axle]: 1
-
Supplementary Article/Info 2: with anti-
squeak plate -
Test Mark: ECE-
R90 - WVA Number: 25147
-
FMSI Code: D1984-
9212 - Weight [kg]: 2.4
- Manufacturer: VALEO
- Name: VA 302401
Wear Warning Contact: with integrated wear sensor, with integrated wear warning contact
- Fitting Position: Rear Axle
- alternatively:
- Quantity per packing unit: 4
-
FMSI Code: D1985-
9213 -
Test Mark: E1 90R-
011041/ 1388 - Brake System: Brembo
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: without accessories
-
WVA Number: 25112,
25113 -
Friction Lining Material: Low-
Metallic - Wear Warning Contact: incl. wear warning contact
- Width 1 [mm]: 128.9
- Width 2 [mm]: 128.9
- Height 1 [mm]: 59.4
- Height 2 [mm]: 59.4
- Thickness 1 [mm]: 18.3
- Thickness 2 [mm]: 18.3
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LP2191
- Length [mm]: 163.2
- Width [mm]: 64.4
- Test Mark: ECE R90 Approved
- Fitting Position: Front Axle
- Thickness 1 [mm]: 17
- Wear Warning Contact: incl. wear warning contact
- Weight [kg]: 2.368
- Observe service information:
- Manufacturer: FEBI HAMULCE
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Tyres: for single tyres
- Quantity per packing unit: 4
- Width [mm]: 129
- Thickness [mm]: 18
- Height [mm]: 60
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article/Supplementary Info: without accessories
- Brake System: Brembo
- Warning Contact Length [mm]: 235
-
Supplementary Article/Info 2: with anti-
squeak plate - Number of wear indicators [per axle]: 1
-
WVA Number: 25112,
25113 - Manufacturer: BREMBO
- Name: BR P 68 063
- Fitting Position: Rear Axle
-
Drive Type: Front-
Wheel Drive - Quantity per packing unit: 4
- Number of pads: 4
- Thickness [mm]: 17.8
- Length [mm]: 128.6
- Height [mm]: 59.4
- Wear Warning Contact: incl. wear warning contact
- Brake Lining: With bevelled edges
- Brake System: Bosch
-
WVA Number: 25112,
25113 - Name: SK VKBP90010E
- Manufacturer: SKF
- Length [mm]: 163
- Width [mm]: 64
- Test Mark: ECE R90 Approved
- Fitting Position: Front Axle
- Thickness 1 [mm]: 17
- Wear Warning Contact: incl. wear warning contact
- Weight [kg]: 2.368
- Observe service information:
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Filter type: In-
Line Filter - Weight [kg]: 0.818
- Inlet Ø [mm]: 10
- Outlet Ø [mm]: 10
- Height [mm]: 184
- Outer Diameter [mm]: 90
- Housing Type: with housing
- Manufacturer: DENCKERMANN FILTRY
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Number of pads: 4
- Thickness [mm]: 17.9
- Length [mm]: 163.4
- Height [mm]: 64.5
- Wear Warning Contact: incl. wear warning contact
- Brake Lining: With bevelled edges
- Brake System: Brembo
-
WVA Number: 25147,
25165 - Manufacturer: SKF
- Name: SK VKBP80011E
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Width [mm]: 164
- Thickness [mm]: 18
- Height [mm]: 65
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article/Supplementary Info: without accessories
- Brake System: Brembo
- Warning Contact Length [mm]: 120
-
Supplementary Article/Info 2: with anti-
squeak plate - Number of wear indicators [per axle]: 1
-
WVA Number: 25147,
25165 - Manufacturer: BREMBO
- Name: BR P 68 062
- Fitting Position: Front Axle
- Thickness [mm]: 18.2
- Height [mm]: 64.7
- Manufacturer: FAST
General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu
- Length [mm]: 163.2
- Width [mm]: 64.4
- Test Mark: ECE R90 Approved
- Fitting Position: Front Axle
- Thickness 1 [mm]: 17
- Wear Warning Contact: incl. wear warning contact
- Weight [kg]: 2.368
- Name: SW 60 91 6845
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 4
- Fitting Position: Rear Axle
- Thickness [mm]: 18.3
- Width [mm]: 128.6
- Height [mm]: 59.8
- Number of wear indicators [per axle]: 1
- Wear Warning Contact: incl. wear warning contact
- Brake System: TRW
- Warning Contact Length [mm]: 330
- Weight [kg]: 1.8
- Manufacturer: TOMEX C
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Width [mm]: 164
- Thickness [mm]: 18
- Height [mm]: 63
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article/Supplementary Info: without accessories
- Brake System: Brembo
- Warning Contact Length [mm]: 310
-
Supplementary Article/Info 2: with anti-
squeak plate - Number of wear indicators [per axle]: 1
-
WVA Number: 25172,
25173 - Name: BR P 68 061
- Manufacturer: BREMBO
- Fitting Position: Front Axle
- Width 1 [mm]: 163.9
- Height 1 [mm]: 64.5
- Thickness 1 [mm]: 18.2
- Brake System: BREMBO
- Warning Contact Length [mm]: 120
- Wear Warning Contact: with integrated wear sensor
- Weight [kg]: 2.29
- Number of wear indicators [per axle]: 1
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
- Fitting Position: Rear Axle
- Width 1 [mm]: 128.6
- Height 1 [mm]: 59.8
- Thickness 1 [mm]: 18.3
- Brake System: BREMBO
- Warning Contact Length [mm]: 325
- Wear Warning Contact: with integrated wear sensor
- Weight [kg]: 1.57
- Number of wear indicators [per axle]: 1
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
- Tyres: for dual tyres
- Fitting Position: Rear Axle
-
Vehicle type: 3.3T,
3.5T, 4.5T - Brake System: Brembo
- Quantity per packing unit: 4
-
Test Mark: ECE-
R90 - Height 1 [mm]: 62.9
- Wear Warning Contact: incl. wear warning contact
- Vibration: with vibration damper
- Width 1 [mm]: 163.5
- Thickness 1 [mm]: 18
- Manufacturer: METELLI UKL.HAMULCOWY
- Fitting Position: Front Axle
- Quantity per packing unit: 4
-
FMSI Code: D1984-
9212 -
Test Mark: E1 90R-
011041/ 1386 - Brake System: Brembo
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: without accessories
-
WVA Number: 25147,
25165 -
Friction Lining Material: Low-
Metallic - Wear Warning Contact: incl. wear warning contact
- Width 1 [mm]: 163.9
- Width 2 [mm]: 163.9
- Height 1 [mm]: 64.5
- Height 2 [mm]: 64.5
- Thickness 1 [mm]: 18.2
- Thickness 2 [mm]: 18.2
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LP2190
- Fitting Position: Front Axle
- Construction Year to: 06.2018
- Quantity per packing unit: 4
- Manufacturer Restriction: BREMBO
- Width [mm]: 163.5
- Height [mm]: 64.7
- Thickness [mm]: 18.2
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- Warning Contact Length [mm]: 120
-
Test Mark: E9 90R -
01107/ 3065 - Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Construction Year from: 09.2014
- Construction Year to: 11.2019
- Fitting Position: Front Axle
- Article number of recommended accessories: 1987474750
- Product must be determined on the vehicle or the motor:
-
Material: Low-
Metallic - Thickness [mm]: 18
- Width [mm]: 163.6
- Height [mm]: 64.9
- Manufacturer: BOSCH
- Construction Year from: 12.2019
- Fitting Position: Front Axle
- Wear Warning Contact: with integrated wear sensor
-
Supplementary Article/Info 2: with anti-
squeak plate - Article number of recommended accessories: 1987474750
- Product must be determined on the vehicle or the motor:
-
Material: Low-
Metallic -
Test Mark: ECE-
R90 - WVA Number: 25147
- Thickness [mm]: 18.2
- Width [mm]: 163.3
- Height [mm]: 64.6
- Manufacturer: BOSCH
- Name: BS 0986494498
- Quantity per packing unit: 4
- Fitting Position: Front Axle
- Thickness [mm]: 18.2
- Width [mm]: 163.5
- Height [mm]: 64.7
- Number of wear indicators [per axle]: 1
- Wear Warning Contact: incl. wear warning contact
- Brake System: BREMBO
- Warning Contact Length [mm]: 120
- Weight [kg]: 2.4
- Manufacturer: TOMEX C
- Fitting Position: Rear Axle
- Construction Year to: 01.2015
- Quantity per packing unit: 4
- Manufacturer Restriction: TRW
- Width [mm]: 128.6
- Height [mm]: 59.8
- Thickness [mm]: 18.3
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- Warning Contact Length [mm]: 335
-
Test Mark: E9 90R -
01120/ 2999 - Manufacturer: TRW
- Quality class: Q
- Name: Brake pads
SVHC: No information available, please contact the manufacturer!
- Brake System: Brembo
- Fitting Position: Front Axle
- Quantity per packing unit: 4
-
Test Mark: ECE-
R90 - Height 1 [mm]: 64.6
- Wear Warning Contact: incl. wear warning contact
- Vibration: with vibration damper
- Width 1 [mm]: 163.5
- Thickness 1 [mm]: 18
- Manufacturer: METELLI UKL.HAMULCOWY
- Construction Year from: 09.2014
- Fitting Position: Rear Axle
- Wear Warning Contact: incl. wear warning contact
-
Supplementary Article/Info 2: with anti-
squeak plate, with mounting manual -
Material: Low-
Metallic -
Test Mark: ECE-
R90 - WVA Number: 25112
- Thickness [mm]: 18
- Width [mm]: 128.7
- Height [mm]: 60
- Manufacturer: BOSCH
- Name: BS 0986494500
- for brake disc diameter [mm]: 305
- Fitting Position: Rear Axle
- Brake System: BOSCH
- Width [mm]: 129
- Height [mm]: 59.5
- Thickness [mm]: 18.2
- Number of wear indicators [per axle]: 2
- Warning Contact Length [mm]: 335
-
Supplementary Article/Info 2: with anti-
squeak plate -
Test Mark: ECE-
R90 - WVA Number: 25112
- Weight [kg]: 1.62
- Manufacturer: VALEO KLOCKI
Wear Warning Contact: with integrated wear sensor, with integrated wear warning contact
- Fitting Position: Rear Axle
- Width [mm]: 128.7
- Height [mm]: 59.4
- Thickness [mm]: 18.1
- Wear Warning Contact: with integrated wear warning contact
- Number of wear indicators [per axle]: 1
- WVA Number: 25112
- Brake System: Brembo
- Packaging length [cm]: 15.2
- Packaging width [cm]: 8.8
- Packaging height [cm]: 8.4
- Weight [kg]: 1.3
- Manufacturer: TEXTAR
-
Lisainfo: 25112-
18, 1 -
Additional information: 25112-
18, 1
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI
- Height [mm]: 183
- Outer Diameter [mm]: 120
-
Filter type: Spin-
on Filter, In- Line Filter - Hydraulic connector diameter [mm]: 10
- Name: BM FE2526
- Manufacturer: BREMSI
- Fitting Position: Rear Axle
- Width [mm]: 128.5
- Height [mm]: 59.5
- Thickness [mm]: 18.4
- Number of wear indicators [per axle]: 2
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length [mm]: 328
- Brake System: Brembo
-
Supplementary Article/Info 2: with anti-
squeak plate - Manufacturer: MEYLE
- Filter type: Filter Insert
- Manufacturer: 3RG
- Fitting Position: Front Axle
- Width [mm]: 163.6
- Height [mm]: 64.7
- Thickness [mm]: 18.4
- Wear Warning Contact: with integrated wear warning contact
- Number of wear indicators [per axle]: 1
- WVA Number: 25147
- Brake System: Brembo
- Article number of recommended accessories: 82076300
- Packaging length [cm]: 17
- Packaging width [cm]: 12
- Packaging height [cm]: 8.3
- Weight [kg]: 1.3
- Manufacturer: TEXTAR
- Filter type: Filter Insert
- Height [mm]: 144
- Outer Diameter [mm]: 84
- Housing Type: for housing with screwed lid
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: FAST
- Additional information: FASFT39124
- Lisainfo: FASFT39124
- Tyres: for single tyres
- Fitting Position: Rear Axle
- Width [mm]: 128.5
- Height [mm]: 59.5
- Thickness [mm]: 18.4
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 2
- Warning Contact Length [mm]: 328
- Brake System: Brembo
-
Article number of recommended accessories: 13.0460-
0507.2 -
Test Mark: E1 90R-
011402/ 1334 - MAPP code available:
- Manufacturer: ATE
- Quality class: Q
- Name: Brake pads
- Quantity per packing unit: 4
- Fitting Position: Front Axle
- Width [mm]: 163.4
- Height [mm]: 64.4
- Thickness [mm]: 17.6
- Wear Warning Contact: with integrated wear sensor
- Brake System: Brembo
- fulfils ECE norm: R90
-
Supplementary Article/Info 2: with anti-
squeak plate -
Article number of recommended accessories: 109-
1890 - Manufacturer: METZGER
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Width [mm]: 163.6
- Height [mm]: 64.7
- Thickness [mm]: 18.4
- Wear Warning Contact: with integrated wear warning contact
- Number of wear indicators [per axle]: 1
- WVA Number: 25147
- Brake System: Brembo
-
Article number of recommended accessories: 8DZ 355 205-
141 - Weight [kg]: 1.3
- Assy./disassy. by qualified personnel required!:
- Name: HE 8DB355015291
- Manufacturer: HELLA PAGID
- Fitting Position: Front Axle
- Width [mm]: 163.5
- Height [mm]: 64.6
- Thickness [mm]: 18.4
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 2
- Warning Contact Length [mm]: 110
- Brake System: Brembo
-
Test Mark: E9 90R-
02A1421/ 3065 - MAPP code available:
- Manufacturer: ATE
- Quality class: Q
- Name: Brake pads
- Fitting Position: Rear Axle
- Width [mm]: 128.5
- Height [mm]: 59.5
- Thickness [mm]: 18.4
- Number of wear indicators [per axle]: 2
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length [mm]: 328
- Brake System: Brembo
-
Supplementary Article/Info 2: with anti-
squeak plate - Quality: PREMIUM
- Manufacturer: MEYLE
General Information: MEYLE-PD brake pads have a very short brake-in time, to ensure safe initial braking and high performance from the start. MEYLE-PD brake pads have a brake-in coating on the pad or are treated with scorching technology.
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Brake System: Brembo
- Width [mm]: 128.7
- Height [mm]: 59.5
- Height 1 [mm]: 59.5
- Thickness [mm]: 18.2
- WVA Number: 25112
- Test Mark: R90 Homologated
- Wear Warning Contact: incl. wear warning contact
- Weight [kg]: 1.627
- Packing Type: Carton
- Packaging length [cm]: 15.5
- Packaging width [cm]: 8.7
- Packaging height [cm]: 8.7
- Manufacturer: JURID
- Tyres: for dual tyres
- Fitting Position: Rear Axle
- Width [mm]: 163.5
- Height [mm]: 62.9
- Thickness [mm]: 18.4
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 2
- Warning Contact Length [mm]: 303
- Brake System: Brembo
-
Test Mark: E1 90R-
011402/ 1332 - MAPP code available:
- Manufacturer: ATE
- Quality class: Q
- Name: Brake pads
- Vehicle Equipment Line/Variant: Sogefi
- Filtritüüp: Filtrer
- Kõrgus (mm): 184
- Välisläbimõõt [mm]: 90
- Läbimõõt 3 (mm): 10
- Läbimõõt 4 (mm): 10
- Manufacturer: PURFLUX
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Brake System: Brembo
- Width [mm]: 163.7
- Height [mm]: 64.8
- Height 1 [mm]: 64.8
- Thickness [mm]: 18.3
- WVA Number: 25147
- Test Mark: R90 Homologated
- Wear Warning Contact: incl. wear warning contact
- Weight [kg]: 2.551
- Packing Type: Carton
- Packaging length [cm]: 20.6
- Packaging width [cm]: 12.2
- Packaging height [cm]: 7.8
- Manufacturer: JURID
- Vehicle Equipment Line/Variant: Sogefi
- Filter type: Filter Insert
- Height [mm]: 184
- Outer Diameter [mm]: 90
- Diameter 3 [mm]: 10
- Diameter 4 [mm]: 10
- Quality class: PJ
- Name: Fuel filter
- Filtritüüp: koos filtrisoojendusega
- Läbimõõt [mm]: 90
- Kõrgus (mm): 183
- Sisend-Ø (mm): 10
- Väljalase-Ø (mm): 10
- Tootja piirang: Sogefi
- Korpusetüüp: needitud kaanega korpusele
- Soovituslik vahetusintervall (km): 60
- pakendi laius [cm]: 12
- pakendi kõrgus [cm]: 13
- pakendi pikkus [cm]: 20
- Netokaal [g]: 859
- Name: KN KL1132D
- Manufacturer: KNECHT
- Fitting Position: Rear Axle
- Tyres: for dual tyres
- Quantity per packing unit: 4
- Width [mm]: 164
- Thickness [mm]: 18
- Height [mm]: 63
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article/Supplementary Info: without accessories
- Brake System: Brembo
- Warning Contact Length [mm]: 310
-
Supplementary Article/Info 2: with anti-
squeak plate - Number of wear indicators [per axle]: 1
- only in connection with: Greenance disc
-
WVA Number: 25172,
25173 - Name: BR P 68 061G
- Manufacturer: BREMBO
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Brake System: BREMBO
- Width [mm]: 164
- Height [mm]: 65
- Thickness [mm]: 18
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 302
- Quantity per packing unit: 4
- Width [mm]: 164
- Thickness [mm]: 18
- Height [mm]: 65
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article/Supplementary Info: without accessories
- Brake System: Brembo
- Warning Contact Length [mm]: 120
-
Supplementary Article/Info 2: with anti-
squeak plate - Number of wear indicators [per axle]: 1
- only in connection with: Greenance disc
-
WVA Number: 25147,
25165 - Name: BR P 68 062G
- Manufacturer: BREMBO
- Fitting Position: Rear Axle
- Tyres: for single tyres
- Quantity per packing unit: 4
- Brake System: BREMBO
- Width [mm]: 128
- Height [mm]: 60
- Thickness [mm]: 18
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 1
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks