Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle both sides,
inner - Inner Diameter [mm]: 19
- Outer Diameter [mm]: 37
- Length [mm]: 40
- paired article number: 270619
- Weight [kg]: 0.03
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
-
Fitting Position: Front Axle,
inner, Upper - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 22
- Inner Diameter [mm]: 20.5
- Length [mm]: 44
- Width [mm]: 31
- Height [mm]: 23
- for OE number: 350204
-
Name: Paigutus -
Kndmik P. OPEL ASTRA H - Manufacturer: SAS
-
Fitting Position: Front Axle,
inner, Lower - Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 22
- Inner Diameter [mm]: 20.5
- Length [mm]: 48
- Width [mm]: 31
- Height [mm]: 23
- for OE number: 350205
-
Name: Paigutus -
Kndmik P. OPEL ASTRA H - Manufacturer: SAS
- Fitting Position: Front Axle both sides
- Inner Diameter [mm]: 20
- Mounting Type: Rubber Mount
- Length [mm]: 39.3
- Weight [kg]: 0.039
- Manufacturer: RTS
-
Fitting Position: both sides,
Front - Quality: OE Performance
-
Material: Rubber,
Metal - Colour: black
- Weight [g]: 45
- Inner Diameter [mm]: 17
- Manufacturer: GATES PASKI PRZEWODY
-
Fitting Position: Front Axle,
Lower, Front - Quality: OE Performance
-
Material: Rubber,
Metal - Colour: black
- Weight [g]: 35
- Inner Diameter [mm]: 17
- Manufacturer: GATES PASKI PRZEWODY
-
Fitting Position: both sides,
Front - Quality: OE Performance
-
Material: Rubber,
Metal - Colour: black
- Weight [g]: 34
- Inner Diameter [mm]: 20
- Manufacturer: GATES PASKI PRZEWODY
-
Fitting Position: both sides,
Front - Quality: OE Performance
-
Material: Rubber,
Metal - Colour: black
- Weight [g]: 44
- Inner Diameter [mm]: 20
- Manufacturer: GATES PASKI PRZEWODY
- Width [mm]: 32.5
- Stabiliser Bar Diameter [mm]: 24
- Length [mm]: 44
- Mounting Type: Rubber Mount
- Weight [kg]: 0.035
-
Fitting Position: Front Axle both sides,
Lower Front Axle - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Vehicle Identification Number (VIN) from: *********6*000001
-
Stabiliser Bar Diameter [mm]: 21,
22 -
Multi-piece: two-
piece - Width [mm]: 31
- Inner Diameter [mm]: 17
- Outer Diameter [mm]: 44
-
Material: Rubber/
Metal -
Fitting Position: Front Axle,
Upper, Lower - Weight [kg]: 0.079
-
Name: Laagrikomplekt,
stabilisatoor - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 44
- Width [mm]: 31
- Mounting Type: Rubber Mount
- Stabiliser Bar Diameter [mm]: 24
- Weight [kg]: 0.045
-
Fitting Position: Front Axle both sides,
Upper Front Axle - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Stabiliser Bar Diameter [mm]: 24
- Length [mm]: 44
- Width [mm]: 31
- Thickness [mm]: 24
- Material: Rubber
-
Fitting Position: Front Axle,
Upper - Weight [kg]: 0.045
-
Name: Paigutus -
Kndmik OPEL P. VECTRA C POàWKA GàRA - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Bar Diameter [mm]: 24
- Length [mm]: 44
- Width [mm]: 31
- Thickness [mm]: 24
- Material: Rubber
-
Fitting Position: Front Axle,
Upper - Weight [kg]: 0.045
- Manufacturer: SWAG
- Name: SW 40 93 8052
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Bar Diameter [mm]: 24
- Length [mm]: 44
- Width [mm]: 32.5
- Thickness [mm]: 23.5
- Material: Rubber
-
Fitting Position: Front Axle,
Lower - Weight [kg]: 0.035
-
Name: Paigutus -
Kndmik OPEL P. VECTRA C POàWKA Dà - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Bar Diameter [mm]: 24
- Length [mm]: 44
- Width [mm]: 32.5
- Thickness [mm]: 23.5
- Material: Rubber
-
Fitting Position: Front Axle,
Lower - Weight [kg]: 0.035
- Manufacturer: SWAG
- Name: SW 40 93 8051
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Production number from: 62000001
- Fitting Position: Front Axle
- Diameter [mm]: 22
- Weight [kg]: 0.09
- Packaging length [cm]: 5
- Packaging width [cm]: 4.8
- Packaging height [cm]: 3.3
- Manufacturer: FEBEST
- Fitting Position: Front Axle
-
Vehicle Identification Number (VIN) from: 8B000001,
68000001, 65000001, 62000001 - Mounting Type: Rubber Mount
- Inner Diameter [mm]: 17.5
- Stabiliser Bar Diameter [mm]: 21
- SVHC: No SVHC present!
- Manufacturer: FAG
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks