• Fitting Position: Rear Axle
• Width [mm]: 8.5
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 52, 62
• Material: NBR (nitrile butadiene rubber)
• Weight [kg]: 0.098
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 14.7
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 50.3
• Fitting Position: Front Axle
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Laius 1 (mm): 13,9
• Laius 2 (mm): 14,2
• Välisläbimõõt 1 [mm]: 39,9
• Välisläbimõõt 2 [mm]: 50,3
• Siseläbimõõt 1 [mm]: 17,5
• Siseläbimõõt 2 (mm): 29
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Rear Axle
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Width [mm]: 15
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 40
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 17.5
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 40
• Height 1 [mm]: 14.75
• Height 2 [mm]: 15
• Manufacturer: JP GROUP
• Lisainfo: Wheel bearing kit, for one front or rear wheel
• Additional information: Wheel bearing kit, for one front or rear wheel

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with shaft seal
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 39
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 17
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-DW-020
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Width [mm]: 14.6
• Inner Diameter [mm]: 17.5
• Outer Diameter [mm]: 39.9
• Width 1 [mm]: 13.8
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 50.3
• Inner Diameter 1 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Fitting Position: Rear Axle Left, Rear Axle Right
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Outer Diameter 1 [mm]: 39
• Outer Diameter 2 [mm]: 50
• Inner Diameter 1 [mm]: 17
• Inner Diameter 2 [mm]: 29
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Required quantity: 2
• Manufacturer: DRIVE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: FRRE LR+RE LR+RE
• Inner Diameter [mm]: 29
• Inner Diameter 2 [mm]: 17
• Width 1 [mm]: 14
• Width 2 [mm]: 39
• Number of mounting bores: 1
• Name: DA KWD1068
• Manufacturer: DAYCO

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 17
• Outer Diameter 1 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 13
• Outer Diameter 2 [mm]: 39
• Weight [kg]: 0.31
• Manufacturer: ABS

• Fitting Position: Rear Axle
• new version:
• Bearing Type: Tapered Roller Bearing
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14.6
• Width 2 [mm]: 15
• Inner Diameter 1 [mm]: 17.5
• Weight [kg]: 0.2
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Info 2: with shaft seal
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Laius 1 (mm): 16
• Laius 2 (mm): 15
• Välisläbimõõt 1 [mm]: 50
• Välisläbimõõt 2 [mm]: 40
• Siseläbimõõt 1 [mm]: 29
• Siseläbimõõt 2 (mm): 17
• Manufacturer: JPN

• Fitting Position: Rear Axle both sides
• Weight [kg]: 0.26
• Height 1 [mm]: 14
• Height 2 [mm]: 13
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 40
• Inner Diameter 1 [mm]: 27
• Inner Diameter 2 [mm]: 17.5
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 34
• Välisläbimõõt [mm]: 64
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Bearing Type: Angular Ball Bearing
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• old version:
• Bearing Type: Tapered Roller Bearing
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Weight [kg]: 0.274
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Required quantity: 2
• Weight [kg]: 0.316
• Packaging length [cm]: 11
• Packaging width [cm]: 9
• Packaging height [cm]: 6
• Supplementary Article/Info 2: with shaft seal
• Outer Diameter [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Width [mm]: 13.9
• Width 2 [mm]: 14.2
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Installatsiooni pool: esisild mõlemapoolselt
• Kõrgus (mm): 37
• Siseläbimõõt [mm]: 34
• Välisläbimõõt [mm]: 64
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 39.9, 50.3
• Inner Diameter [mm]: 17.5, 29
• Width [mm]: 14.6
• Width 1 [mm]: 14.7
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Width [mm]: 14
• Inner Diameter [mm]: 17, 29
• Outer Diameter [mm]: 40, 50
• Bearing Type: Tapered Roller Bearing
• Weight [kg]: 0.43
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer: BLUE PRINT ZAWIESZENIE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• old version:
• Bearing Type: Tapered Roller Bearing
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 17.5
• Weight [kg]: 0.274
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Name: SW 40 85 0001
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width [mm]: 37
• Outer Diameter [mm]: 64
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Fabrication Number: KLP-DW-010
• Manufacturer: NTY
• Name: NTY KLP-DW-010

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter 1 [mm]: 17.5
• Outer Diameter 1 [mm]: 39.9
• Width 1 [mm]: 14.6
• Inner Diameter 2 [mm]: 29
• Outer Diameter 2 [mm]: 50.3
• Width 2 [mm]: 14.7
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter 1 [mm]: 64
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle
• Required quantity: 2
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Required quantity: 2
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Supplementary Article/Info 2: with shaft seal
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.465
• Manufacturer: FEBI BILSTEIN JR.

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Version: One
• Width 1 [mm]: 37
• Outer Diameter 1 [mm]: 64
• Inner Diameter 1 [mm]: 34
• Manufacturer: GSP AUTOMOTIVE

• Fitting Position: Front Axle both sides
• Manufacturer: JP GROUP
• Lisainfo: Wheel bearing front, left/right
• Additional information: Wheel bearing front, left/right

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle configuration line / variant: FRONT LR+FR LR+FR
• Inner Diameter [mm]: 34
• Width 1 [mm]: 37
• Number of mounting bores: 1
• Name: DA KWD1016
• Manufacturer: DAYCO

• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.5
• Supplementary Article/Supplementary Info: with Split Pin, with retaining rings
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Manufacturer: OPTIMAL

• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.5
• Supplementary Article/Supplementary Info: with retaining rings, with Split Pin
• Name: SW 40 90 3096
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Width [mm]: 37
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Right, Front Axle
• Rotation angle [°]: 90
• Tightening Torque [Nm]: 20, 130
• Manufacturer: SNR
• Name: SN R153.14

• Fitting Position: Front Axle
• Inner Diameter [mm]: 22
• Outer Diameter [mm]: 120
• Guarantee: 4 years guarantee
• Weight [kg]: 1.35
• Number of Holes: 4
• Bolt Hole Circle Ø 1 [mm]: 100
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV

• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 64
• Manufacturer: SKF