• Engine Code: A 14 XEL
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Construction Year to: 11.2010
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor, Active sensor
• Manufacturer: KAMOKA

• Fabrication Number: ESS-FT-002
• Manufacturer: NTY

• Number of pins: 3
• Fabrication Number: ECP-PL-032

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.012
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pressure from [kPA]: 10
• Pressure to [kPA]: 122
• Fabrication Number: ECM-PL-009
• Manufacturer: NTY
• Lisainfo: OPEL ASTRA G 1.4 16V, VECTRA B 1.6 95-
• Additional information: OPEL ASTRA G 1.4 16V, VECTRA B 1.6 95-

• Construction Year to: 11.2010
• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 24.2
• for OE number: 55187973, 1920 JH, 4M5G 12K073 AB, 93183528
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Supplementary Article/Info 2: with seal ring, without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Name: CE 17SKV140
• Manufacturer: ESEN SKV

• Engine Code: Z 14 XEP
• Construction Year to: 11.2010
• Manufacturer: BOSCH
• Name: BS 0281002170

Manufacturer: FAST

• Tightening torque to [Nm]: 22
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Colour Coding: blue
• Name: MM SPA103
• Manufacturer: MAGNETI MARELLI

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168381

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 50
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Construction Year from: 12.2009
• Manufacturer: MAGNETI MARELLI
• Name: MM APS100

• Length [mm]: 51
• Width [mm]: 26
• Thickness [mm]: 23
• Number of connectors: 2
• Weight [kg]: 0.04
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: white
• Manufacturer: BREMI

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11352

• Resistor Type: Hall Sensor
• Height [mm]: 24.1
• Manufacturer: VERNET

• Engine Code: Z 14 XEP
• Construction Year to: 11.2010
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Manufacturer: BOSCH

• Construction Year to: 11.2010
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Number of pins: 3
• Sensor Type: Hall Sensor
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Length [mm]: 300
• Fitting Position: Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-PL-008
• Manufacturer: NTY

• Construction Year to: 11.2010
• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MAX

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Overall Length [mm]: 340
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-DW-008
• Manufacturer: NTY

• Fitting Position: Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-DW-004

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

Manufacturer: MAGNETI MARELLI

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Engine Code: A 14 XEL
• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Manufacturer Restriction: Citroen, Fiat, Opel, Peugeot
• Number of pins: 4
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, lambda andur
• Manufacturer: HBE

for OE number: 0 261 230 218, 0 281 002 205, 0 281 002 215, 0 281 002 468, 0 281 002 709, 0 281 002 999, 0 281 006 028

• Construction Year to: 11.2010
• Fitting Position: after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Manufacturer: DELLO AUTOMEGA

• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358152041
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Fitting Position: Front
• Exhaust System: before catalytic converter
• Lambda Sensor: Regulating Probe
• Number of connectors: 4
• Length [mm]: 525
• Manufacturer: VERNET

• Engine Code: A 14 XEL
• Fitting Position: Intake Manifold
• Pressure from [kPA]: 10
• Pressure to [kPA]: 122
• Output Voltage, from [V]: 0.394
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.195
• Manufacturer: EPS

• Lambda Sensor: Diagnostic Probe
• Construction Year to: 11.2010
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 300
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: Z 14 XEP
• Construction Year to: 11.2010
• Manufacturer: BOSCH

• Construction Year to: 11.2010
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Finger probe
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: Andur,kompressorirohk
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Pressure from [kPA]: 20
• Name: DE PS10155
• Manufacturer: DELPHI

• Number of pins: 3
• Pressure from [kPA]: 10
• Pressure to [kPA]: 120
• Manufacturer: FAE

• Engine Code: Z 14 XEP
• Construction Year to: 11.2010
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS

• Lambda Sensor: Diagnostic Probe
• Exhaust System: after catalytic converter
• Fitting Position: Front
• Length [mm]: 400
• Number of connectors: 4
• Manufacturer: VERNET

• not for trim level: Ecoflex
• Housing Type: without housing
• Number of pins: 5
• Fitting Position: Air Filter Housing
• Supplementary Article/Info 2: with integrated air temperature sensor
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 11.2010
• Lambda Sensor: Unheated
• Number of pins: 4
• Cable Length [mm]: 520
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Resistor [Ohm]: 9
• Length [mm]: 275
• Number of circuits: 4
• Conductor Number: 4
• Cable Length [mm]: 275
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 220
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: LAMBDA ANDUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: Z 14 XEP
• Construction Year to: 11.2010
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Engine Code: A 14 XEL
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 11.2010
• Engine Code: Z 14 XEP
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 448
• Weight [kg]: 0.11
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Fitting Position: before catalytic converter, after catalytic converter Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: Z 14 XEP
• Construction Year to: 11.2010
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Block Separation:
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 429
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Engine Code: A 14 XEL
• Fitting Position: after catalytic converter
• Lambda Sensor: Diagnostic Probe, Planar probe, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 350
• Thread Size: M18x1,5mm
• Resistor [Ohm]: 9
• Overall Length [mm]: 300
• Cable Length [mm]: 300
• Number of pins: 4
• Weight [kg]: 0.12
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: Z 14 XEP
• Construction Year to: 11.2010
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 300
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18x1,5mm
• Overall Length [mm]: 300
• Cable Length [mm]: 300
• Number of pins: 4
• Weight [kg]: 0.104
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: Z 14 XEP
• Construction Year to: 11.2010
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 325
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 350
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 285
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• for OE number: 855252, 93186115
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 400
• Number of pins: 4
• Weight [g]: 83
• Gross Weight [g]: 116
• Manufacturer: DENSO
• Name: DN DOX-2050

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
CORSA D, 07.06-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
CORSA D, 07.06-
(kvaliteediklass: Q)"

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Name: Ohumassimootja
• Manufacturer: BRM

• Mounting Type: Bolted
• Housing Type: without housing
• Number of pins: 5
• Sensor Type: Hot-film Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 8ET358166541
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 855235
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 525
• Number of pins: 4
• Weight [g]: 94
• Gross Weight [g]: 127
• Manufacturer: DENSO
• Name: DN DOX-2081
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: Ohumassimootja
• Manufacturer: DLP

• Number of pins: 5
• for OE number: 12671616
• Manufacturer: MEAT&DORIA

• Resistor Type: Hot-film Sensor
• Length [mm]: 96.32
• Number of connectors: 5
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.07
• Housing Type: without housing
• Name: OHUMASSIMOOTJA
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.