• for OE number: 855378
• Lambda Sensor: Diagnostic Probe
• OE-numbri jaoks: 855378
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 1 100
• Pistikkontaktide arv: 4
• Kaal (g): 163
• Brutokaal [g]: 196
• Manufacturer: DENSO

Lambda andur: soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur Additional information: "Tootja: DENSO
ASTRA H, 03.04-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ASTRA H, 03.04-
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Overall Length [mm]: 549
• Number of circuits: 4
• Lambda Sensor: Thread pre-greased
• Fabrication Number: ESL-PL-013
• Manufacturer: NTY

• Ülekandeliinide arv: 4
• Lambda andur: Sond
• Manufacturer: KAMOKA

• for OE number: 855355
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Lambda andur: soojendatud
• Kaablipikkus (mm): 575
• Pistikkontaktide arv: 4
• Ülekandeliinide arv: 4
• Keermemõõt: M 18x1,5
• Pistikukatte kuju: ovaalne
• OE-numbri jaoks: 9193654
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Pistikkontaktide arv: 4
• Lambda andur: Titaanandur
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: Z 20 LER
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 549
• Keermemõõt: M18x1,5
• Võtmekaugus: 22
• OE-numbri jaoks: 9193148
• Manufacturer: DELLO AUTOMEGA

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ENERGY

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Pistikkontaktide arv: 4
• Lambda andur: Titaanandur
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: katalüsaatori ees
• Lambda andur: Sond
• Pistikkontaktide arv: 4
• pikkus üle kõige (mm): 549
• Manufacturer: JP GROUP A/S
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Lambda andur: Sõrmesensor
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Käigukasti liik: Käigukast
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Regulating Probe
• Engine Code: Z 20 LER
• Voltage [V]: 12
• Length [mm]: 741
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV072

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Lambda andur: soojendatud
• Väliskeerme mõõde: M18 x 1,5
• Võtmekaugus: 22
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 220
• Kaal (kg): 0,067
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe
• Kaablipikkus (mm): 520
• Lambda andur: Titaanandur, soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
ASTRA F CLASSIC KOMB
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
ASTRA F CLASSIC KOMB
(kvaliteediklass: PJ)"

• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Length [mm]: 632
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV710
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Kaablipikkus (mm): 300
• Lambda andur: Titaanandur, soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
VECTRA C GTS, 08.02-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
VECTRA C GTS, 08.02-
(kvaliteediklass: PJ)"

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Ülekandeliinide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Regulating Probe
• Fitting Position: Exhaust Manifold
• Lambda andur: kütmata
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 520
• Kvaliteet: OE EQUIVALENT
• Manufacturer: MEAT & DORIA

• Engine Code: Z 20 LER
• Lambda Sensor: Regulating Probe
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Lambda andur: Sõrmesensor, soojendatud, Keere eelmääritud
• Pistikkontaktide arv: 4
• OE-numbri jaoks: V99760001
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Pikkus (mm): 350
• Väljalaskesüsteem: pärast katalüsaatorit
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Ülekandeliinide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: before catalytic converter
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Lambda andur: Titaanandur, soojendatud, Keere eelmääritud
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 93
• Brutokaal [g]: 140
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda andur: soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Kaablipikkus (mm): 1 080
• Lambda andur: Titaanandur, soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Keermemõõt: M18 x 1,5
• Pistiku värv: must
• Lambda andur: soojendatud, Keere eelmääritud
• Pistikukatte kuju: ovaalne
• Pistikkontaktide arv: 4
• OE-numbri jaoks: 08 55 402
• Pikkus (mm): 580
• Laius (mm): 32
• Kõrgus (mm): 22
• Kaal (kg): 0,104
• Kaablipikkus (mm): 300
• Ülekandeliinide arv: 4
• Versioon: Zr
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Exhaust System: before catalytic converter
• Lambda Sensor: Regulating Probe
• Pikkus (mm): 750
• Ühenduste arv: 4
• Manufacturer: VERNET

• for OE number: 855355
• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• OE-numbri jaoks: 855429
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 575
• Pistikkontaktide arv: 4
• Kaal (g): 86
• Brutokaal [g]: 119
• Manufacturer: DENSO
• Name: DN DOX-2003
• Quality class: Q

Lambda andur: soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur Additional information: "Tootja: DENSO
CORSA C (F08, F68),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
CORSA C (F08, F68),
(kvaliteediklass: Q)"

• Fitting Position: before catalytic converter
• Lambda andur: Sond
• Kaablipikkus (mm): 570
• Väljalaskesüsteem: katalüsaatori ees
• Pistikkontaktide arv: 4
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: Lambda andur
• Manufacturer: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: Z 20 LER
• Fitting Position: after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Kaablipikkus (mm): 1 100
• Ühendushulk: 4
• Piirangutega toode/piirangu info 2: koos kinnitusmaterjaliga
• Lambda andur: soojendatud, Titaanandur, Keere eelmääritud
• ka universaaltootena saadav vaata toode-nr.: 1.998.235
• Ülekandeliinide arv: 4
• Manufacturer: EPS

• Engine Code: Z 20 LER
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Kaablipikkus (mm): 570
• Ühendushulk: 4
• Lambda andur: soojendatud, Titaanandur, Keere eelmääritud
• ka universaaltootena saadav vaata toode-nr.: 1.998.235
• Ülekandeliinide arv: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• OE-numbri jaoks: 08 55 355
• Pikkus (mm): 570
• Ülekandeliinide arv: 4
• Kaal (kg): 0,104
• Lambda andur: Keere eelmääritud
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda andur: Sond
• Pikkus (mm): 570
• tehnilise informatsiooni number: Universal 77015
• Installatsiooni pool: katalüsaatori ees
• Manufacturer: FAE

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 549
• ka universaaltootena saadav vaata toode-nr.: 0258986615
• Soovituslik vahetusintervall (km): 160 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Regulating Probe
• Installatsiooni pool: katalüsaatori ees, pärast katalüsaatorit
• Lambda andur: Titaanandur, Keere eelmääritud, soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 570
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Pistikukatte kuju: ovaalne
• Manufacturer: VALEO

• Engine Code: Z 20 LER
• Fitting Position: before catalytic converter
• Lambda andur: soojendatud
• Pinge [V]: 12
• Ühendushulk: 4
• Kaablipikkus (mm): 570
• Pistikkontaktide arv: 4
• Manufacturer: PIERBURG

• Lambda andur: Diagnoosisond
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 1 040
• Manufacturer: MEAT&DORIA