• Length [mm]: 57
• Number of connectors: 2
• Supplementary Article/Supplementary Info: without gasket/seal
• Lisainfo: Temperature sensor for air intake
• Additional information: Temperature sensor for air intake

• for OE number: 12 38 079
• Length [mm]: 57
• Supplementary Article/Supplementary Info: without gasket/seal
• Fabrication Number: ECT-PL-001
• Manufacturer: NTY
• Name: NTY ECT-PL-001

• Engine Code: Z 18 XER
• Vehicle Identification Number (VIN) from: 70294719, 75086480, 78048188
• Length [mm]: 57
• Material: Plastic
• Number of pins: 2
• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV677

• Engine Code: Z 18 XER
• Vehicle Identification Number (VIN) from: 70294719, 75086480, 78048188
• Length [mm]: 57
• Number of pins: 2
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MAX

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Sensor Type: NTC Sensor
• Fitting Depth [mm]: 23
• for OE number: 55353807
• Manufacturer: MEAT&DORIA

• Engine Code: Z 18 XER, A18XER/Z18XER
• Housing Colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAG

• Number of pins: 2
• Housing Colour: black
• Manufacturer: DELPHI
• Name: DE TS10521

• Supplementary Article/Info 2: without cable
• Housing Colour: white
• Transmission Type: Manual Transmission, Automatic Transmission
• Fabrication Number: ESS-PE-000
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 30
• Alternative Repair Kit: 550700
• Manufacturer: ERA

• Housing Diameter [mm]: 9
• Connector Shape: oval
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Article number of recommended accessories: 2324012
• Power [W]: 0.06
• Manufacturer: METZGER

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.012
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 72094719, 75086480, 78048188, 8B000001
• Connector Shape: oval
• Number of pins: 2
• Sensor Type: NTC Sensor
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Housing Colour: black
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAG

• Engine Code: Z 18 XER, A 18 XER
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Number of pins: 2
• Fabrication Number: ESS-PL-002
• Manufacturer: NTY

• Engine Code: Z 18 XER
• Vehicle Identification Number (VIN) from: 70294719, 75086480, 78048188
• Length [mm]: 57
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.01
• Supplementary Article/Supplementary Info: without gasket/seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: Z 18 XER
• Required quantity: 1
• Name: EP 1.994.033
• Manufacturer: EPS

• Number of pins: 2
• Colour: black
• Connector Shape: oval
• Sensor Type: NTC Sensor
• Fitting Depth [mm]: 30
• for OE number: 60606033
• Manufacturer: MEAT&DORIA

• Fabrication Number: ECP-PL-013
• Manufacturer: NTY

• Colour: black
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 18.3
• Weight [kg]: 0.046
• Manufacturer: ERA

• Fabrication Number: ECM-PL-015
• Manufacturer: NTY

• Engine Code: Z 18 XER
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Connector Shape: oval
• Alternative Repair Kit: 550731
• Manufacturer: ERA

• Construction Year to: 08.2013
• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Colour: black
• Number of pins: 3
• Pressure from [kPA]: 10
• Pressure to [kPA]: 121.7
• Length [mm]: 52
• Material: Plastic
• Warranty: 3 years warranty
• Socket colour: black
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV162

• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• for OE number: 5946 23, 55353316, 003 153 89 28, 6235703
• Manufacturer: MEAT&DORIA

Manufacturer: MAGNETI MARELLI

• Engine Code: Z 18 XER
• Number of pins: 3
• Housing Colour: black
• Sensor Type: Hall Sensor
• for OE number: 6235752
• Manufacturer: FAE

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA
• Manufacturer: BRM

• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 121.7
• Measuring Range from [V]: 0.39
• Measuring Range to [V]: 4.7
• Number of connectors: 3
• Manufacturer: VERNET

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Connector Shape: oval
• Alternative Repair Kit: 550730
• Manufacturer: ERA

• Length [mm]: 45
• Thickness [mm]: 18
• Inner Diameter [mm]: 8
• Number of connectors: 2
• Weight [kg]: 0.045
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. ALFA ROMEO 159 02-
• Manufacturer: BRM

• Length [mm]: 770
• Fitting Position: Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-PL-005
• Manufacturer: NTY
• Name: NTY ESL-PL-005

• Engine Code: Z 18 XER
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Engine Code: Z 18 XER, A18XER/Z18XER
• Required quantity: 1
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Engine Code: Z 18 XER
• Number of pins: 3
• Housing Colour: black
• Sensor Type: Hall Sensor
• for OE number: 6235751
• Manufacturer: FAE

• Engine Code: Z 18 XER
• Vehicle Identification Number (VIN) from: 70294719, 75086480, 78048188
• Length [mm]: 57
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.02
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

Manufacturer: MAGNETI MARELLI

• Colour: black
• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Manufacturer Restriction: Citroen, Fiat, Opel, Peugeot
• Number of pins: 4
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, lambda andur
• Manufacturer: HBE

for OE number: 0 261 230 218, 0 281 002 205, 0 281 002 215, 0 281 002 468, 0 281 002 709, 0 281 002 999, 0 281 006 028

• Number of pins: 3
• for OE number: 55563375, 1238394
• Manufacturer: MEAT&DORIA

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring, without cable
• Housing Colour: black
• Alternative Repair Kit: 550574
• Manufacturer: ERA

Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Construction Year to: 12.2012
• Fitting Position: Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Socket colour: black
• Name: Lambda andur
• Manufacturer: MAX

• Engine Code: Z 18 XER, A 18 XER
• Lambda Sensor: Regulating Probe, Heated
• Number of circuits: 4
• Length [mm]: 741
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Number of pins: 2
• Manufacturer: DELPHI

• Height [mm]: 24
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Construction Year to: 08.2013
• Lambda Sensor: Regulating Probe, Finger probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: Z 18 XER, A18XER/Z18XER
• Required quantity: 1
• Pressure from [kPA]: 10
• Pressure to [kPA]: 122
• Output Voltage, from [V]: 0.391
• Output Voltage, up to [V]: 4.7
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: EPS

• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe, Heated
• Model Year to: 2013
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Fitting Position: after catalytic converter
• Cable Length [mm]: 300
• Weight [kg]: 0.085
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 470
• Number of circuits: 4
• Resistor [Ohm]: 6
• Conductor Number: 4
• Cable Length [mm]: 470
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Number of pins: 3
• Pressure from [kPA]: 10
• Pressure to [kPA]: 120
• Manufacturer: FAE

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Engine Code: A 18 XER
• Cable Length [mm]: 250
• Name: DE ES21177-12B1
• Manufacturer: DELPHI

• Length [mm]: 80
• Housing Type: with housing
• Supplementary Article/Info 2: with integrated air temperature sensor
• Fabrication Number: EPP-PL-005
• Manufacturer: NTY

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 500
• Name: DE ES21116-12B1
• Manufacturer: DELPHI

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Cable Length [mm]: 650
• for article number: 81565E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Diagnostic Probe
• Construction Year from: 10.2005
• Construction Year to: 03.2010
• Exhaust System: after catalytic converter
• Voltage [V]: 12
• Weight [kg]: 0.12
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV102

• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Supplementary Article/Info 2: without cable
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: FAE

• Length [mm]: 750
• Number of circuits: 4
• Resistor [Ohm]: 6
• Conductor Number: 4
• Cable Length [mm]: 750
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM032

• Colour: black
• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: VDO

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

Manufacturer: MAGNETI MARELLI

• Length [mm]: 45.8
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: A 18 XER, Z 18 XER
• Colour: black
• Number of pins: 3
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: VDO

• Length [mm]: 45.8
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Name: SW 40 94 0055
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: Z 18 XER, A18XER/Z18XER
• Required quantity: 2
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Fitting Position: before catalytic converter, after catalytic converter Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Equipment: for vehicles with automatic transmission
• Number of pins: 6
• Connector Shape: rectangular
• Fabrication Number: EAP-PL-000

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: Z 18 XER
• Colour: black
• Number of pins: 4
• Name: Ohumassimootja
• Manufacturer: VDO

• Construction Year to: 08.2013
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Manufacturer: BOSCH

• Construction Year to: 08.2013
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 500
• Number of pins: 4
• Socket colour: black
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Required quantity: 2
• Engine Code: A18XER, Z18XER
• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 430
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
OMEGA B (25/, 26/, 2
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
OMEGA B (25/, 26/, 2
(kvaliteediklass: PJ)"