• for OE number: 855378
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,100
• Number of pins: 4
• Weight [g]: 163
• Gross Weight [g]: 196
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
ASTRA H, 03.04-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ASTRA H, 03.04-
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) from: 72000001, 75000001, 78000001
• Number of pins: 2
• Housing Colour: black
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 1342567, 6238422, 90542063
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Socket colour: bright blue
• Connector Shape: oval
• Thread Size: M 12x1,5
• Spanner Size: 19 mm
• for OE number: 12566778, 1338.F9, 500382599, 50 10 412 450
• Manufacturer: MEAT&DORIA

• Fabrication Number: ECP-PL-025
• Number of pins: 3
• Sensor Type: Hall Sensor
• Connector Shape: rectangular
• Voltage [V]: 12
• Manufacturer: NTY

• Engine Code: Z 20 LEL
• Vehicle Identification Number (VIN) to: 62999999, 65999999, 68999999, 6G
• Colour: black
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 1.880.170, 1.880.190
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Fabrication Number: ECT-PL-003
• Manufacturer: NTY
• Name: NTY ECT-PL-003

• Housing Colour: white
• Thread Size: M 12x1,5
• Number of pins: 2
• Manufacturer: FAE

• Number of pins: 2
• Housing Colour: blue
• Supplementary Article/Supplementary Info: with seal
• Corresponds to the original part in colour: black, light blue, white
• Manufacturer: METZGER

• Fabrication Number: ECM-PL-010
• Manufacturer: NTY

Lisainfo: ENG. 1.6.2.0,2.2 OPEL ASTRA H 04-10, CORSA D 06-14, MERIVA A 05-10, ZAFIRA 01-05 Additional information: ENG. 1.6.2.0,2.2 OPEL ASTRA H 04-10, CORSA D 06-14, MERIVA A 05-10, ZAFIRA 01-05

• Fabrication Number: ECM-PL-005
• Manufacturer: NTY

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 250
• Length [mm]: 55
• Weight [kg]: 0.04
• Material: Plastic
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 02.2009
• Vehicle Identification Number (VIN) from: 72000001, 75000001, 78000001
• Manufacturer: BOSCH

• Fitting Position: Suction Pipe
• Connector Shape: oval
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Connector Shape: rectangular
• Pressure from [bar]: 0.15
• Pressure to [bar]: 1.17
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 02.2009
• Number of pins: 3
• Pressure from [kPA]: 25
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: 72000001
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Construction Year to: 02.2009
• Charge Type: for vehicles with charge air cooler
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• Number of pins: 4
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: MAX

• Construction Year to: 02.2009
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.03
• Operating Mode: Electric
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV110

• Construction Year to: 02.2009
• Vehicle Identification Number (VIN) to: 62999999, 65999999, 68999999
• Manufacturer: BOSCH

• Alternatively:
• Number of pins: 3
• Housing Colour: black
• Connector Shape: rectangular
• Number of mounting bores: 1
• Alternative Repair Kit: 550153
• Resistor M[ohm]: 1.8
• Manufacturer: ERA

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA OPEL ASTRA 1,6T 07-
• Manufacturer: BRM

• Vehicle Identification Number (VIN) to: 62999999
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Alternatively:
• Number of pins: 4
• Alternative Repair Kit: 550364
• Manufacturer: ERA

• Construction Year to: 02.2009
• Charge Type: for vehicles with charge air cooler
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Vehicle Identification Number (VIN) from: 72000001
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Overall Length [mm]: 549
• Number of circuits: 4
• Lambda Sensor: Thread pre-greased
• Fabrication Number: ESL-PL-013
• Manufacturer: NTY

• Vehicle Identification Number (VIN) from: 72000001/75000001, 78000001/7G, 8B000001
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• for OE number: 855355, 9193654
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 575
• Number of pins: 4
• Number of circuits: 4
• Thread Size: M 18x1,5
• Connector Shape: oval
• Manufacturer: DELLO AUTOMEGA

• Manufacturer Restriction: Citroen, Fiat, Opel, Peugeot
• Number of pins: 4
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, lambda andur
• Manufacturer: HBE

for OE number: 0 261 230 218, 0 281 002 205, 0 281 002 215, 0 281 002 468, 0 281 002 709, 0 281 002 999, 0 281 006 028

• Engine Code: Z 20 LEL
• Construction Year to: 02.2009
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 549
• Thread Size: M18x1,5
• Spanner Size: 22
• for OE number: 9193148
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 4
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Planar probe
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: Z20LEL
• Pressure from [kPA]: 20
• Pressure to [kPA]: 253
• Measuring Range from [V]: 0.39
• Measuring Range to [V]: 4.7
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009400951
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 02.2009
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Number of pins: 4
• Overall Length [mm]: 549
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Number of pins: 3
• Pressure from [kPA]: 15
• Pressure to [kPA]: 255
• Manufacturer: MEAT&DORIA

• Construction Year to: 02.2009
• Lambda Sensor: Diagnostic Probe, Finger probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Number of pins: 3
• Pressure from [kPA]: 13
• Manufacturer: DELPHI

• Construction Year to: 02.2009
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

• Lambda Sensor: Regulating Probe
• Engine Code: Z 20 LEL
• Voltage [V]: 12
• Length [mm]: 741
• Number of circuits: 4
• Weight [kg]: 0.11
• Operating Mode: Electric
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV072

• Lambda Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 220
• Weight [kg]: 0.067
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe, Unheated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Cable Length [mm]: 520
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Cable Length [mm]: 520
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
ASTRA F CLASSIC KOMB
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
ASTRA F CLASSIC KOMB
(kvaliteediklass: PJ)"

• Production Number: 90499610
• Number of connectors: 3
• Weight [kg]: 0.02
• for OE number: 62 38 084
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: Z 20 LEL
• Vehicle Identification Number (VIN) to: 62999999, 65999999, 68999999, 6G
• Required quantity: 1
• Name: EP 1.953.311
• Manufacturer: EPS

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 300
• Manufacturer: DELPHI

Additional information: "Tootja: DELPHI
VECTRA C GTS, 08.02-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
VECTRA C GTS, 08.02-
(kvaliteediklass: PJ)"

• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Length [mm]: 632
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV710
• Manufacturer: ESEN SKV

• Construction Year to: 02.2009
• Manufacturer: BOSCH

• Construction Year to: 02.2009
• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 250
• Manufacturer: FAE

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 448
• Weight [kg]: 0.11
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 02.2009
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: Z 20 LEL
• Required quantity: 1
• Manufacturer Restriction: BOSCH
• Pressure from [kPA]: 15
• Pressure to [kPA]: 117
• Output Voltage, from [V]: 0.58
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET
• Name: EP 1.993.054

• Engine Code: Z 20 LEL
• Pressure from [kPA]: 11
• Pressure to [kPA]: 255
• Output Voltage, from [V]: 0.39
• Output Voltage, up to [V]: 4.7
• Name: EP 1.993.092
• Manufacturer: EPS

• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 02.2009
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 1,080
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Equipment: for vehicles with automatic transmission
• Number of pins: 6
• Connector Shape: rectangular
• Fabrication Number: EAP-PL-000

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year to: 02.2009
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: BOS

• Housing Type: with housing
• Number of pins: 5
• Housing material: Plastic
• Supplementary Article/Info 2: with integrated grille
• Recommended additional repairs: Air Filter
• New Part:
• Used part return not required:
• Name: OHUMASSIMOOTJA
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: before catalytic converter
• Required quantity: 1
• Engine Code: Z20LEL
• Lambda Sensor: Regulating Probe
• Cable Length [mm]: 570
• Exhaust System: before catalytic converter
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Manufacturer: FAE

• Engine Code: Z 20 LEL
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 570
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Exhaust System: for pre-catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• for OE number: 08 55 355
• Length [mm]: 570
• Number of circuits: 4
• Weight [kg]: 0.104
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 855355, 855429
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 575
• Number of pins: 4
• Weight [g]: 86
• Gross Weight [g]: 119
• Manufacturer: DENSO
• Name: DN DOX-2003

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
CORSA C (F08, F68),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
CORSA C (F08, F68),
(kvaliteediklass: Q)"

• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Socket colour: black
• Lambda Sensor: Heated, Thread pre-greased
• Connector Shape: oval
• Number of pins: 4
• for OE number: 08 55 402
• Length [mm]: 580
• Width [mm]: 32
• Height [mm]: 22
• Weight [kg]: 0.104
• Cable Length [mm]: 300
• Number of circuits: 4
• Version: Zr
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Lambda Sensor: Regulating Probe
• Length [mm]: 570
• Technical Information Number: Universal 77015
• Fitting Position: before catalytic converter
• Manufacturer: FAE

• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI

• Construction Year to: 02.2009
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 549
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Required quantity: 1
• Construction Year to: 02.2009
• Voltage [V]: 12
• Number of pins: 5
• Manufacturer: BREMI

• Engine Code: Z 20 LEL
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 1,100
• Conductor Number: 4
• Supplementary Article/Info 2: with fastening material
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased