• Name: MM SPA171
• Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 93174208
• Manufacturer: MEAT&DORIA

• for OE number: 13 38 511
• Width [mm]: 33
• Height [mm]: 30
• Length [mm]: 58
• Guarantee: 3 years guarantee
• Number of pins: 2
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: Z 28 NEL
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 1.880.170, 1.880.190
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: Z 28 NEL
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 7.8170, 7.8190
• Manufacturer: FACET

• Fabrication Number: ECT-PL-003
• Manufacturer: NTY
• Name: NTY ECT-PL-003

• Number of pins: 2
• Housing Colour: blue
• Supplementary Article/Supplementary Info: with gasket/seal
• Corresponds to the original part in colour: black, light blue, white
• Manufacturer: METZGER

• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 3
• Pressure [Pa] from: 10,000
• Pressure [Pa] to: 115,000
• Fabrication Number: ECM-PL-007
• Manufacturer: NTY

• Length [mm]: 55
• Number of pins: 4
• Guarantee: 3 years guarantee
• Pressure from [kPA]: 20
• Pressure to [kPA]: 250
• Weight [kg]: 0.04
• Material: Plastic
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV151

• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV146

• Connector Shape: oval
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 09.2007
• Manufacturer: BOSCH

• Tightening torque to [Nm]: 22
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Colour Coding: blue
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA103

• Construction Year to: 09.2007
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV184

• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 09.2007
• Charge Type: for vehicles with charge air cooler
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Number of pins: 4
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: MAX

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA OPEL CORSA 05-
• Manufacturer: BRM

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA OPEL CORSA 01-
• Manufacturer: BRM

• Construction Year to: 09.2007
• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MAX

• Required quantity: 2
• Vehicle Identification Number (VIN) from: 71000001
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 25.4
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Construction Year to: 09.2007
• Manufacturer: BOSCH

• Vehicle Identification Number (VIN) from: 71000001
• Required quantity: 2
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Alternatively:
• Number of pins: 4
• Alternative Repair Kit: 550364
• Manufacturer: ERA

• Vehicle Identification Number (VIN) to: 61999999
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Construction Year to: 09.2007
• for OE number: 93170309
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Engine Code: Z 28 NEL
• Sensor Type: Piezoelectric Sensor
• Number of pins: 4
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

Supplementary Article/Info 2: with integrated air temperature sensor, with seal ring

• Number of pins: 3
• Pressure from [kPA]: 13
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP
• Lisainfo: PS10121
• Additional information: PS10121

• Number of pins: 2
• Name: DE AS10192
• Manufacturer: DELPHI

• Required quantity: 1
• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 117.5
• Measuring Range from [V]: 0.392
• Measuring Range to [V]: 4.75
• Number of connectors: 3
• Manufacturer: VERNET

• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• Required quantity: 2
• Vehicle Identification Number (VIN) to: 61999999
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 26
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Construction Year to: 09.2007
• Supplementary Article/Info 2: Low Pressure Side
• Fuel Mixture Formation: Manifold Injection/Direct Injection
• Manufacturer: BOSCH

• Construction Year to: 09.2007
• for OE number: 55576223
• Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY

• Number of pins: 4
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year to: 09.2007
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 25
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Construction Year to: 09.2007
• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: Z 28 NEL
• Required quantity: 1
• Pressure from [kPA]: 10
• Pressure to [kPA]: 118
• Output Voltage, from [V]: 0.392
• Output Voltage, up to [V]: 4.75
• Manufacturer: EPS

• Pressure from [kPA]: 20
• Pressure to [kPA]: 253
• Measuring Range from [V]: 0.39
• Measuring Range to [V]: 4.7
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: Front
• Quantity: 1
• Length [mm]: 400
• Number of connectors: 4
• Manufacturer: VERNET

• Oxygen Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 450
• Weight [kg]: 0.087
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 09.2007
• for OE number: 12575467
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Oxygen Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 450
• Weight [kg]: 0.087
• Name: SW 33 10 3204
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 09.2007
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• for OE number: 6238706
• Manufacturer: MEAT & DORIA

• Construction Year to: 09.2007
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 09.2007
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 340
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 09.2007
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-HY-520
• Manufacturer: NTY

• Construction Year to: 09.2007
• Oxygen Sensor: Diagnostic Probe, Unheated
• Number of pins: 4
• Cable Length [mm]: 520
• Quality: OE EQUIVALENT
• for OE number: 025198484
• Manufacturer: MEAT & DORIA

• Number of pins: 3
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Manufacturer: FAE

• Engine Code: Z 28 NEL
• Pressure from [kPA]: 11
• Pressure to [kPA]: 255
• Output Voltage, from [V]: 0.39
• Output Voltage, up to [V]: 4.7
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Oxygen Sensor: Switching-type Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Engine Code: Z 28 NEL
• Pressure from [kPA]: 11
• Pressure to [kPA]: 255
• Output Voltage, from [V]: 0.39
• Output Voltage, up to [V]: 4.7
• Manufacturer: FACET

• Vehicle Identification Number (VIN) to: 61999999
• Required quantity: 2
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• Engine Code: Z 28 NEL
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Name: EP 1.998.235
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Engine Code: Z 28 NEL
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 250
• Conductor Number: 4
• Number of circuits: 4
• Manufacturer: FACET

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 655
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Engine Code: Z 28 NEL
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 720
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Oxygen Sensor: Broadband Oxygen Sensor
• Number of pins: 5
• Cable Length [mm]: 610
• Quality: OE EQUIVALENT
• for OE number: 03C906262A
• Manufacturer: MEAT & DORIA

• Quantity: 1
• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: Ohumassimootja
• Manufacturer: DLP

• Construction Year to: 09.2007
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 684
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Number of pins: 6
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Code Letter: CE
• Colour: black
• Manufacturer: METZGER