Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: Z 20 LET
-
Spark Plug: 1 -
Earthed Electrode, with resistor - Electrode Gap [mm]: 0.9
- Thread Size: M14 x 1.25
- Thread Length [mm]: 19
- Spanner Size: 16
-
Technical Information: Nichel-
Chromium with internal in branch - Manufacturer: MAGNETI MARELLI
- Construction Year to: 08.2005
-
Fuel Type: CNG/
LPG - Supplementary Article/Info 2: Electrode gap must be set for operation on gas
-
Replace after km: 15,
000 - Electrode Gap [mm]: 0.7
- Length [mm]: 126
-
Spark Plug: 1 -
Earthed Electrode - Version: E7EC1
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 08.2005
-
Fuel Type: CNG/
LPG - Supplementary Article/Info 2: Electrode gap must be set for operation on gas
-
Replace after km: 15,
000 - Electrode Gap [mm]: 0.7
- Length [mm]: 126
- Height [mm]: 51
-
Spark Plug: 1 -
Earthed Electrode - Version: VR7EC1
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 40
- Tightening Torque [Nm]: 30
- Electrode Gap [mm]: 0.9
- Thread Size: M14 x 1.25
- Spanner Size: 16
-
Spark Plug: 1 -
Earthed Electrode - Thread Length [mm]: 19
- Assy./disassy. by qualified personnel required!:
- Name: HE 8EH188704381
- Manufacturer: HELLA
- for OE number: 9618494580
- Spanner Size: 16 mm
-
Spark Plug: Nickel Middle Electrode,
2 - Earthed Electrode - Thread Length [mm]: 19
- Manufacturer: KAMOKA
- Construction Year to: 08.2005
-
Fuel Type: CNG/
LPG - Supplementary Article/Info 2: Electrode gap must be set for operation on gas
-
Replace after km: 15,
000 - Required quantity: 4
- Electrode Gap [mm]: 0.9
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 16
- Spark Position [mm]: 3
- Number of pins: 1
- Name: STEKNAL
- Manufacturer: BOS
- Engine Code: Z 20 LET
- Required quantity: 4
- Quantity per packing unit: 4
-
Spark Plug: 1 -
Earthed Electrode, Nickel Middle Electrode - Thread Size: M14x1.25
- Thread Length [mm]: 19
- Diameter [mm]: 14
- for OE number: 1WT318110
- Connector type: Solid SAE
- Spanner Size: 16 mm
- Tightening Torque [Nm]: 22
- Weight [g]: 43
- Gross Weight [g]: 46
-
alternative item: IK20TT,
IK20 - Manufacturer: DENSO
- Name: DN K20TT
- Lisainfo: K20TT DENSO
- Additional information: K20TT DENSO
- Quantity per packing unit: 10
- contains article number: 13534
-
External Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 16
- Electrode Gap [mm]: 1
-
Spark Plug: with gasket seat,
2 - Earthed Electrode - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 08.2005
- Required quantity: 4
- Electrode Gap [mm]: 1
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 16
- Spark Position [mm]: 6
- Number of pins: 2
- Name: STEKNAL
- Manufacturer: BOS
- Required quantity: 4
- Alternatively:
- Quantity per packing unit: 10
- Electrode Gap [mm]: 0.9
- Connector type: SAE
-
Thread Size: M14x1,
25 - Spanner Size: 16 mm
-
Quality/ Grade: Poly-
V Tit -
Spark Plug: 1 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Name: STEKNAL
- Manufacturer: BERU
- Engine Code: Z 20 LET
- Required quantity: 4
- Quantity per packing unit: 10
-
Spark Plug: 2 -
Earthed Electrode, Nickel Middle Electrode - Thread Size: M14x1.25
- Thread Length [mm]: 19
- Diameter [mm]: 14
- for OE number: 7700500168
- Connector type: Removable SAE
- Spanner Size: 16 mm
- Tightening Torque [Nm]: 22
- Weight [g]: 43
- Gross Weight [g]: 46
- alternative item: K20TT
- Manufacturer: DENSO
- Name: DN K20TXR
- Lisainfo: K20TXR DENSO
- Additional information: K20TXR DENSO
- Engine Code: Z 20 LET
- Quantity: 4
-
Spark Plug: 2 -
Earthed Electrode - Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: Z 20 LET
- Spanner Size: 16 mm
-
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 6
- Name: STEKNAL
- Manufacturer: NGK
- Additional information: BKR5EK
- Lisainfo: BKR5EK
Spark Plug: Nickel Middle Electrode, 2 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
- Engine Code: Z 20 LET
- Quantity per packing unit: 4
- Spanner Size: 16 mm
-
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 6
- Name: STEKNAL
- Manufacturer: NGK
Spark Plug: Nickel Middle Electrode, 2 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
- Required quantity: 4
- Quantity per packing unit: 10
- Electrode Gap [mm]: 1
-
Connector type: M4/
SAE - Thread Size: M14x1.25
- Spanner Size: 16 mm
- Quality/ Grade: Nickel GE
- Packing Type: Carton
- Thread Length [mm]: 19
- Technical Information Number: RC10DMC
- Spark Position [mm]: 6.1
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8.85
- Packaging width [cm]: 2.6
- Packaging height [cm]: 2.35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 9
- Projection [mm]: 3.6
-
Name: CH OE019/
T10 - Manufacturer: CHAMPION
Spark Plug: 2 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Tightening Torque [Nm]: 25
- Electrode Gap [mm]: 1
- Thread Size: M14 x 1.25
- Spanner Size: 16
-
Spark Plug: 1 -
Earthed Electrode - Thread Length [mm]: 19
- Assy./disassy. by qualified personnel required!:
- Name: HE 8EH188705071
- Manufacturer: HELLA
- Required quantity: 4
- Quantity per packing unit: 10
- Electrode Gap [mm]: 1
- Connector type: SAE
-
Thread Size: M14x1,
25 - Spanner Size: 16 mm
-
Spark Plug: 2 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
-
Technical Information Number: 14 FR-
8 LDUOX4 - Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Name: STEKNAL
- Manufacturer: BERU
- Engine Code: Z 20 LET
-
Spark Plug: 1 -
Earthed Electrode, with resistor - Electrode Gap [mm]: 0.9
- Thread Size: M14 x 1.25
- Thread Length [mm]: 19
- Spanner Size: 16
-
Technical Information: Platinum-
tip - Manufacturer: MAGNETI MARELLI
-
Name: MM SPB7206-
9
- Construction Year to: 08.2005
-
Fuel Type: CNG/
LPG -
Replace after km: 30,
000 - Electrode Gap [mm]: 1.1
- Thread Size: M14
- Spanner Size: 16 [mm]
- Number of pins: 1
- Thread Length [mm]: 19
- Thread Pitch [mm]: 1.25
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 08.2005
-
Fuel Type: CNG/
LPG -
Replace after km: 30,
000 - Required quantity: 4
- Electrode Gap [mm]: 0.7
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 16
- Spark Position [mm]: 4
- Number of pins: 1
- Name: STEKNAL
- Manufacturer: BOS
- Tightening Torque [Nm]: 25
- Electrode Gap [mm]: 1
- Thread Size: M14 x 1.25
- Spanner Size: 16
-
Spark Plug: 1 -
Earthed Electrode - Thread Length [mm]: 19
- Assy./disassy. by qualified personnel required!:
- Name: HE 8EH188706071
- Manufacturer: HELLA
- Required quantity: 4
- Alternatively:
- Quantity per packing unit: 4
- Electrode Gap [mm]: 0.8
- Connector type: SAE
- Thread Size: M14x1.25
- Spanner Size: 16 mm
- Quality/ Grade: Pt GE
- Packing Type: Carton
- Thread Length [mm]: 19
- Technical Information Number: RC10WMPB3
- Spark Position [mm]: 5
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 9.5
- Packaging width [cm]: 2.4
- Packaging height [cm]: 2.4
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 3
- Name: CH CCH9013
- Manufacturer: CHAMPION
Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode
- Engine Code: Z 20 LET
- Required quantity: 4
-
Fuel Type: CNG/
LPG - Quantity per packing unit: 4
- Thread Size: M14x1.25
- Thread Length [mm]: 19
- Diameter [mm]: 14
- Connector type: Solid SAE
- Spanner Size: 16 mm
- Tightening Torque [Nm]: 22
- Weight [g]: 43
- Gross Weight [g]: 46
- alternative item: IK20TT
- Manufacturer: DENSO
- Name: DN IK20TT
- Lisainfo: IK20TT DENSO
- Additional information: IK20TT DENSO
Spark Plug: with resistor, 1 - Earthed Electrode, Iridium Middle Electrode
- Engine Code: Z 20 LET
- Spanner Size: 16 mm
-
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 3.5
-
Manufacturer: NGK -
NTK
Spark Plug: Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
- Required quantity: 4
-
Fuel Type: Liquefied Petroleum Gas
(LPG) - Alternatively:
-
Recommended change interval [km]: 30,
000 - Quantity per packing unit: 10
- Electrode Gap [mm]: 0.7
- Connector type: SAE
-
Thread Size: M14x1,
25 - Spanner Size: 16 mm
-
Spark Plug: 1 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
-
Technical Information Number: 14 FR-
7 DPPUS2 - Self-service suited packaging see parts list:
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Name: STEKNAL
- Manufacturer: BERU
- Engine Code: Z 20 LET
- Spanner Size: 16 mm
-
Thread Size: M14 x 1,
25 -
Spark Plug: Iridium Middle Electrode,
Fixed SAE connector -
Fuel Type: CNG/
LPG -
Recommended change interval [km]: 60,
000 - Name: STEKNAL
- Manufacturer: NGK
- Lisainfo: LPG1
- Additional information: LPG1
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks