• Vehicle Equipment: for vehicles with power steering
• Diameter [mm]: 10
• Filter type: In-Line Filter
• Supplementary Article/Info 2: Magnetic
• Lisainfo: Hydraulic Filter, steering system
• Additional information: Hydraulic Filter, steering system

• Vehicle Equipment: for vehicles with power steering
• Diameter [mm]: 12
• Filter type: In-Line Filter
• Supplementary Article/Info 2: Magnetic
• Manufacturer: JP GROUP
• Lisainfo: Hydraulic Filter, steering system
• Additional information: Hydraulic Filter, steering system

• Vehicle Equipment: for vehicles with power steering
• Filter type: In-Line Filter
• Specification: Magnetfilter
• Diameter [mm]: 10
• Fitting Position: from steering gear to fluid reservoir
• Manufacturer: AIC
• Lisainfo: 55266 AIC
• Additional information: 55266 AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: CORTECO
• Name: COC 49396931

• Width [mm]: 28.3
• Height [mm]: 25.5
• Manufacturer: FAST

• Operating Mode: Hydraulic
• Steering Gear Type: Rack and Pinion Steering Gear
• for steering gear manufacturer: SMI
• Length [mm]: 1,160
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Input shaft height [mm]: 100
• Number of steering wheel turns: 3.3
• Inlet Ø [mm]: 11
• Outlet Ø [mm]: 12
• Net weight [kg]: 8.9
• Name: ROOLIAJAM
• Manufacturer: ELS
• Lisainfo: ELS11-0620
• Additional information: ELS11-0620

• Operating Mode: Hydraulic
• Manufacturer Restriction: Saginaw
• Pressure [bar]: 100
• Name: Pump - Roolimine RENAULT MASTER II Z KOEM
• Manufacturer: MAX

• Operating Mode: Hydraulic
• Pulleys: with multi-belt pulley
• Fabrication Number: SPW-RE-012
• Manufacturer: NTY
• Name: NTY SPW-RE-012

• for steering manufacturer: ZF
• New part without deposit:
• Supplementary Article/Supplementary Info: without reservoir
• Pulleys: without belt pulley
• Pressure [bar]: 120
• Rotation Direction: Clockwise rotation
• Assy./disassy. by qualified personnel required!:
• Name: AB 140-01-001
• Manufacturer: ABAKUS
• Additional information: 140-01-001 ABAK
• Lisainfo: 140-01-001 ABAK

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of grooves: 5
• Pulleys: with belt pulley
• Belt Pulley Ø [mm]: 125
• Pressure [bar]: 95
• Manufacturer: BGA

• for steering manufacturer: SAGINAW
• New part without deposit:
• Supplementary Article/Supplementary Info: without reservoir
• Number of grooves: 6
• Pulleys: with belt pulley
• Pressure [bar]: 80
• Rotation Direction: Clockwise rotation
• Assy./disassy. by qualified personnel required!:
• Name: AB 140-01-002
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for steering manufacturer: SAGINAW
• New part without deposit:
• Supplementary Article/Supplementary Info: without reservoir
• Number of grooves: 5
• Pulleys: with belt pulley
• Pressure [bar]: 90
• Rotation Direction: Clockwise rotation
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 140-01-016

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Operating Mode: Hydraulic
• Manufacturer Restriction: ZF
• Pressure [bar]: 110
• Manufacturer: JP GROUP
• Lisainfo: Hydraulic Pump, steering system
• Additional information: Hydraulic Pump, steering system

• Operating Mode: Hydraulic
• Pressure [bar]: 95
• Belt Pulley Ø [mm]: 125
• Housing Type: Aluminium Housing
• Number of grooves: 6
• Manufacturer: KAMOKA

• Manufacturer Restriction: SAGINAW
• Operating Mode: Hydraulic
• Housing Type: Aluminium Housing
• Pressure [bar]: 100
• Name: Pump - Roolimine RENAULT MASTER II
• Manufacturer: MAX

• Operating Mode: Hydraulic
• for steering manufacturer: Saginaw
• Number of grooves: 7
• Manufacturer: MAX

Name: Pump - Roolimine RENAULT LAGUNA II/MASTER II/VEL SATIS/ESPACE III

• Pressure [bar]: 90
• Belt Pulley Ø [mm]: 125
• Pulleys: with belt pulley
• Supplementary Article/Supplementary Info: without reservoir
• Number of grooves: 5
• Rotation Direction: Clockwise rotation
• Manufacturer: KAMOKA

• Operating Mode: Hydraulic
• Pressure [bar]: 120
• Name: Pump - Roolimine RENAULT/OPEL MASTER 2,2-3,0DCI
• Manufacturer: MAX
• Lisainfo: MGP-2149
• Additional information: MGP-2149

• Pressure [bar]: 110
• Operating Mode: Hydraulic
• Material: Aluminium
• Valve type: Pressure Limiting Valve
• Belt Pulley Ø [mm]: 125
• Pulleys: with belt pulley
• Rotation Direction: Clockwise rotation
• Number of inlets/outlets: 1
• Pump Type: Vane Pump
• New Part:
• Number of grooves: 6
• Always compare old and new part (in particular OE No.):
• Mounting Points Distance [mm]: 41
• Weight [kg]: 2.17
• Operating Pressure [bar]: 80
• Number of ribs: 6
• Flow rate [l/h]: 50
• Manufacturer: ENERGY

• Operating Mode: Hydraulic
• for steering manufacturer: SAGINAW
• Pressure [bar]: 85
• Net weight [kg]: 2.56
• Manufacturer: ELS

Name: Pump - Roolimine RENAULT LAGUNA II/MASTER II/TRAFIC II

• Pressure [bar]: 110
• Operating Mode: Hydraulic
• Material: Aluminium
• Valve type: Pressure Limiting Valve
• Belt Pulley Ø [mm]: 125
• Pulleys: with belt pulley
• Rotation Direction: Clockwise rotation
• Number of inlets/outlets: 1
• Pump Type: Vane Pump
• Guarantee: 3 years guarantee
• New Part:
• Number of grooves: 5
• Always compare old and new part (in particular OE No.):
• Mounting Points Distance [mm]: 31
• Weight [kg]: 2.07
• Operating Pressure [bar]: 90
• Number of ribs: 5
• Flow rate [l/h]: 50
• Manufacturer: SKV GERMANY
• Name: CE 10SKV151

• Pressure [bar]: 120
• Operating Mode: Hydraulic
• Material: Aluminium
• Valve type: Pressure Limiting Valve
• Pulleys: without belt pulley
• Rotation Direction: Clockwise rotation
• Number of inlets/outlets: 1
• Pump Type: Vane Pump
• Guarantee: 3 years guarantee
• New Part:
• Always compare old and new part (in particular OE No.):
• Mounting Points Distance [mm]: 38
• Weight [kg]: 1.8
• Operating Pressure [bar]: 120
• Flow rate [l/h]: 70
• Manufacturer: SKV

• Operating Mode: Hydraulic
• Manufacturer Restriction: SAGINAW
• Material: Aluminium
• Height [mm]: 96
• Guarantee: 2 years guarantee
• Technical Information: PULLEY ADAPTOR. Ø COUPLING [MM]: 29
• Name: Hdraulikapump,roolimine
• Manufacturer: LIZ

• Operating Mode: Hydraulic
• Pressure [bar]: 100
• Pulleys: without belt pulley
• Manufacturer: FAST

• Operating Mode: Hydraulic
• Pressure [bar]: 100
• Housing Type: Aluminium Housing
• Manufacturer: FAST

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles

• Operating Mode: Hydraulic
• Pressure [bar]: 100
• Manufacturer Restriction: SAGINAW
• Lisainfo: Hydraulic Pump, steering system
• Additional information: Hydraulic Pump, steering system

• Number of grooves: 7
• Pulleys: without belt pulley
• Pressure [bar]: 100
• Manufacturer: BGA

• Operating Mode: Hydraulic
• Belt Pulley Ø [mm]: 126
• Number of grooves: 6
• Vehicle Equipment: for vehicles with air conditioning
• Manufacturer Restriction: Pulley Height 105mm
• Pressure [bar]: 95
• Net weight [kg]: 2.06
• Name: Pump - Roolimine OPEL MOVANO/RENAULT MASTER
• Manufacturer: ELS

• Number of grooves: 6
• Pulleys: with belt pulley
• Pressure [bar]: 95
• Manufacturer: BGA

• Pressure [bar]: 110
• Operating Mode: Hydraulic
• Material: Aluminium
• Valve type: Pressure Limiting Valve
• Belt Pulley Ø [mm]: 125
• Pulleys: with belt pulley
• Rotation Direction: Clockwise rotation
• Number of inlets/outlets: 1
• Pump Type: Vane Pump
• New Part:
• Number of grooves: 6
• Always compare old and new part (in particular OE No.):
• Mounting Points Distance [mm]: 41
• Weight [kg]: 2.17
• Operating Pressure [bar]: 80
• Number of ribs: 6
• Flow rate [l/h]: 50
• Manufacturer: ENERGY

• Operating Mode: Hydraulic
• Pressure [bar]: 106
• Pulleys: with belt pulley
• Valve type: Pressure Limiting Valve
• Rotation Direction: Clockwise rotation
• Pump Type: Vane Pump
• Manufacturer: FAST

• Operating Mode: Hydraulic
• Operating Pressure [bar]: 100
• Manufacturer Restriction: Saginaw
• New part without deposit:
• Required quantity: 1
• Name: Hdraulikapump,roolimine
• Manufacturer: MEY

• Pressure [bar]: 110
• Operating Mode: Hydraulic
• Material: Aluminium
• Valve type: Pressure Limiting Valve
• Belt Pulley Ø [mm]: 125
• Pulleys: with belt pulley
• Rotation Direction: Clockwise rotation
• Number of inlets/outlets: 1
• Pump Type: Vane Pump
• Guarantee: 3 years guarantee
• New Part:
• Number of grooves: 6
• Always compare old and new part (in particular OE No.):
• Mounting Points Distance [mm]: 41
• Weight [kg]: 2.17
• Operating Pressure [bar]: 80
• Number of ribs: 6
• Flow rate [l/h]: 50
• Manufacturer: SKV GERMANY
• Name: CE 10SKV168

• Operating Mode: Hydraulic
• for steering manufacturer: Saginaw
• Belt Pulley Ø [mm]: 125
• Number of grooves: 5
• Vehicle Equipment: for vehicles without air conditioning
• Manufacturer Restriction: Pulley Height 97mm
• Pressure [bar]: 105
• Net weight [kg]: 1.92
• Name: Pump - Roolimine MOVANO/VIVARO/MASTER/TRAFIC 00-
• Manufacturer: ELS

• Operating Mode: Hydraulic
• for steering manufacturer: ZF
• Manufacturer Restriction: Hub Height 104mm
• Pressure [bar]: 125
• Net weight [kg]: 1.72
• Name:
• Manufacturer: ELS

• Operating Mode: Hydraulic
• Operating Pressure [bar]: 120
• New part without deposit:
• Required quantity: 1
• Name: Pump - Roolimine RENAULT/OPEL MASTER 2,2-3,0DCI
• Manufacturer: MEY
• Lisainfo: 16-146310001
• Additional information: 16-146310001

• Manufacturer Restriction: DELPHI, SAGINAW
• Operating Mode: Hydraulic
• Housing Type: Aluminium Housing
• Left-/right-hand drive vehicles: for left-hand/right-hand drive vehicles
• Pressure [bar]: 100
• Observe technical data:
• Exchange Part:
• Name: Pump - Roolimine RENAULT MASTER II
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Operating Mode: Hydraulic
• for steering manufacturer: Saginaw
• Number of grooves: 7
• Net weight [kg]: 1.98
• Manufacturer: ELS

Name: Pump - Roolimine RENAULT LAGUNA II/MASTER II/VEL SATIS/ESPACE III

• Construction Year from: 02.2011
• Operating Mode: Hydraulic
• Operating Pressure [bar]: 105
• New part without deposit:
• Required quantity: 1
• Name: Hdraulikapump,roolimine
• Manufacturer: MEY

• Operating Mode: Hydraulic
• for steering manufacturer: ZF
• Manufacturer Restriction: With hub, Hub Height 98.5mm
• Pressure [bar]: 110
• Net weight [kg]: 1.34
• Name: Hdraulikapump,roolimine
• Manufacturer: ELS

• Operating Mode: Hydraulic
• Operating Pressure [bar]: 120
• New part without deposit:
• Required quantity: 1
• Capacity [litre]: 2
• Name: Hdraulikapump,roolimine
• Manufacturer: MEY

• Operating Mode: Hydraulic
• Manufacturer Restriction: DELPHI - SAG
• Belt Pulley Ø [mm]: 125
• Number of ribs: 5
• Manufacturer: GENERAL RICAMBI

• Manufacturer Restriction: DELPHI - SAG
• Operating Mode: Hydraulic
• Number of ribs: 6
• Belt Pulley Ø [mm]: 125
• Manufacturer: GENERAL RICAMBI

• Operating Mode: Hydraulic
• Operating Pressure [bar]: 100
• Observe service information:
• for steering manufacturer: Saginaw
• Exchange Part:
• Manufacturer: SPI

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used. Name: POMPA WSPOM. UK. KIER. RENAULT LAGUNA II/MASTER II/TRAFIC II

• Operating Mode: Hydraulic
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Fabrication Number: SPK-RE-013
• Manufacturer: NTY
• Name: NTY SPK-RE-013
• Lisainfo: UUS TOODE, vana korpust pole vaja tagastada
• Additional information: UUS TOODE, vana korpust pole vaja tagastada

• Vehicle Equipment: for vehicles with power steering
• Operating Mode: Hydraulic
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• for steering manufacturer: SMI
• Manufacturer Restriction: KOYO, JTEKT
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer! Name: PRZEKADNIA KIER. OPEL VIVARO/RENAULT TRAFFIC II 01-

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Overall Length [mm]: 1,160
• Operating Mode: Hydraulic
• Steering: with tie rod
• Steering Gear Type: Rack and Pinion Steering Gear
• Inlet Ø [mm]: 11
• Outlet Ø [mm]: 12
• Input shaft height [mm]: 100
• Number of steering wheel turns: 3.3
• for steering gear manufacturer: SMI
• Observe service information:
• Exchange Part:
• Manufacturer: SPI

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used. Name: PRZEKADNIA KIER. OPEL VIVARO/RENAULT TRAFFIC II 01-