• Süüteküünal: 1-massielektrood
• OE-numbri jaoks: 12 14 149
• Manufacturer: TOPRAN HANS PRIES

Piirangutega toode/piirangu info 2: Erinevate Toojate toodete paigaldamine on keelatud! Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: C 16 NZ, X 16 SZR
• Süüteküünal: 1-massielektrood, koos takistusega
• Elektroodide vahe (mm): 0,7
• Keermemõõt: M14
• Keermepikkus (mm): 19
• Võtmekaugus: 20,8
• Piirangutega toode/piirangu info 2: koos lameistmega
• Tehniline informatsioon: Nichel-Chromium with internal in branch
• Manufacturer: MAGNETI MARELLI

• Engine Code: C 16 NZ, X 16 SZR
• Süüteküünal: 1-massielektrood, koos takistusega
• Elektroodide vahe (mm): 0,9
• Keermemõõt: M14 x 1.25
• Keermepikkus (mm): 19
• Võtmekaugus: 16
• Tehniline informatsioon: Nichel-Chromium with internal in branch
• Manufacturer: MAGNETI MARELLI

• Vehicle Identification Number (VIN) to: 02BF1476
• Engine Code: C 16 NZ, X 16 SZR
• Required quantity: 4
• Quantity per packing unit: 10
• Süüteküünal: 1-massielektrood, Niklist keskelektrood
• Keermepikkus (mm): 19
• Läbimõõt [mm]: 14
• OE-numbri jaoks: 21013707001
• Ühendustehnika: Removable SAE
• Võtmekaugus: 20.6
• Väändejõud [Nm]: 22
• Kaal (g): 56
• Brutokaal [g]: 59
• alternatiivne toode: W20TT
• Manufacturer: DENSO
• Name: DN W20EPRU

• Engine Code: C 16 NZ, X 16 SZR
• Construction Year to: 08.1994, 08.1997
• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Block Separation:
• Construction Year from: 09.1995
• Elektroodide vahe (mm): 0,7
• Pikkus (mm): 126
• Süüteküünal: 1-massielektrood
• Versioon: E7EC1
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: C 16 NZ
• Construction Year to: 07.1995
• Väändejõud [Nm]: 25
• Elektroodide vahe (mm): 0,8
• Keermemõõt: M14 x 1,25
• Võtmekaugus: 20,8
• Süüteküünal: 1-massielektrood
• Keermepikkus (mm): 19
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 8EH188704001
• Manufacturer: HELLA

• OE-numbri jaoks: 9004851114
• Võtmekaugus: 20
• Süüteküünal: Niklist keskelektrood, 1-massielektrood
• Keermepikkus (mm): 19
• Manufacturer: KAMOKA

• Süüteküünal: 2-massielektroodi
• Elektroodide vahe (mm): 1
• Manufacturer: TOPRAN

Piirangutega toode/piirangu info 2: Erinevate Toojate toodete paigaldamine on keelatud! Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: C 16 NZ, X 16 SZR
• Construction Year to: 08.1994, 08.1997
• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Block Separation:
• Construction Year from: 09.1995
• Elektroodide vahe (mm): 0,7
• Pikkus (mm): 126
• Kõrgus (mm): 51
• Süüteküünal: 1-massielektrood
• Versioon: VR7EC1
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: C 16 NZ
• Construction Year to: 07.1995
• Elektroodide vahe (mm): 0,7
• Süüteküünal: 1-massielektrood
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: C 16 NZ
• Construction Year to: 08.1994
• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Required quantity: 4
• Elektroodide vahe (mm): 0,8
• Väändejõud [Nm]: 28
• Keermemõõt: M 14 x 1,25
• Keermepikkus (mm): 19
• Võtmekaugus: 20,8
• Sädemeasetus (mm): 3
• Pistikkontaktide arv: 1
• Manufacturer: BOSCH
• Name: BS 0242235663

• Engine Code: C 16 NZ
• Construction Year to: 08.1994
• Replace after km: 30,000
• Required quantity: 4
• Elektroodide vahe (mm): 0,8
• Väändejõud [Nm]: 28
• Keermemõõt: M 14 x 1,25
• Keermepikkus (mm): 19
• Võtmekaugus: 20,8
• Sädemeasetus (mm): 3
• Pistikkontaktide arv: 1
• Manufacturer: BOSCH
• Name: BS 0242229656

• OE-numbri jaoks: 9618494580
• Võtmekaugus: 16 mm
• Süüteküünal: Niklist keskelektrood, 2-massielektroodi
• Keermepikkus (mm): 19
• Manufacturer: KAMOKA

• Engine Code: C 16 NZ, X 16 SZR
• Construction Year to: 08.1994, 08.1997
• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Required quantity: 4
• Block Separation:
• Construction Year from: 09.1995
• Elektroodide vahe (mm): 0,9
• Väändejõud [Nm]: 28
• Keermemõõt: M 14 x 1,25
• Keermepikkus (mm): 19
• Võtmekaugus: 16
• Sädemeasetus (mm): 3
• Pistikkontaktide arv: 1
• Manufacturer: BOSCH
• Name: BS 0242235666

• Engine Code: C 16 NZ
• Construction Year to: 08.1994
• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Elektroodide vahe (mm): 0,7
• Pikkus (mm): 126
• Süüteküünal: 1-massielektrood
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 02BF1477
• Engine Code: C 16 NZ, X 16 SZR
• Required quantity: 4
• Quantity per packing unit: 4
• Süüteküünal: 1-massielektrood, Niklist keskelektrood
• Keermepikkus (mm): 19
• Läbimõõt [mm]: 14
• OE-numbri jaoks: 1WT318110
• Ühendustehnika: Solid SAE
• Võtmekaugus: 16
• Väändejõud [Nm]: 22
• Kaal (g): 43
• Brutokaal [g]: 46
• alternatiivne toode: IK20TT, IK20
• Manufacturer: DENSO
• Name: DN K20TT
• Lisainfo: K20TT DENSO
• Additional information: K20TT DENSO

• Engine Code: C 16 NZ
• Construction Year to: 07.1995
• Võtmekaugus: 20,8 mm
• Keermemõõt: M14 x 1,25
• Keermepikkus (mm): 19
• Sädemeasetus (mm): 3
• Manufacturer: NGK
• Name: NG BPR5ES

Süüteküünal: ära kruvitav SAE-ühendus, Niklist keskelektrood, 1-massielektrood, veakõrvaldused, 5 koom, koos lametihendikohaga

• Engine Code: C 16 NZ
• Construction Year to: 07.1995
• Quantity per packing unit: 4
• Võtmekaugus: 20,8 mm
• Keermemõõt: M14 x 1,25
• Keermepikkus (mm): 19
• Sädemeasetus (mm): 3
• Manufacturer: NGK
• Name: NG V-LINE 6

Süüteküünal: ära kruvitav SAE-ühendus, Niklist keskelektrood, 1-massielektrood, veakõrvaldused, 5 koom, koos lametihendikohaga

• Vehicle Identification Number (VIN) to: 02BF1476
• Engine Code: C 16 NZ, X 16 SZR
• Required quantity: 4
• Quantity per packing unit: 4
• Süüteküünal: 1-massielektrood, Niklist keskelektrood
• Keermepikkus (mm): 19
• Läbimõõt [mm]: 14
• Riikide valik: Jaapan
• Ühendustehnika: Crimped SAE
• Võtmekaugus: 20.6
• Väändejõud [Nm]: 22
• Kaal (g): 58
• Brutokaal [g]: 61
• alternatiivne toode: IW20TT, IW20
• Manufacturer: DENSO
• Name: DN W20TT
• Quality class: Q

Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: C 16 NZ, X 16 SZR
• Construction Year to: 08.1994, 08.1997
• Replace after km: 60,000
• Required quantity: 4
• Block Separation:
• Construction Year from: 09.1995
• Elektroodide vahe (mm): 1
• Väändejõud [Nm]: 28
• Keermemõõt: M 14 x 1,25
• Keermepikkus (mm): 19
• Võtmekaugus: 16
• Sädemeasetus (mm): 6
• Pistikkontaktide arv: 2
• Manufacturer: BOSCH

• Engine Code: C16NZ
• Süüteküünal: 2-massielektroodi
• Keermepikkus (mm): 19
• Elektroodide vahe (mm): 0,9
• Võtmekaugus: 16
• Väändejõud alates [Nm]: 20
• Väändejõud kuni [Nm]: 30
• Manufacturer: VALEO

• Vehicle Identification Number (VIN) from: 02BF1477
• Engine Code: C 16 NZ, X 16 SZR
• Required quantity: 4
• Quantity per packing unit: 10
• Süüteküünal: 2-massielektroodi, Niklist keskelektrood
• Keermepikkus (mm): 19
• Läbimõõt [mm]: 14
• OE-numbri jaoks: 7700500168
• Ühendustehnika: Removable SAE
• Võtmekaugus: 16
• Väändejõud [Nm]: 22
• Kaal (g): 43
• Brutokaal [g]: 46
• alternatiivne toode: K20TT
• Manufacturer: DENSO
• Name: DN K20TXR
• Lisainfo: K20TXR DENSO
• Additional information: K20TXR DENSO

• Engine Code: C 16 NZ, X 16 SZR
• Vehicle Identification Number (VIN) from: 02BF1477
• Quantity: 4
• Süüteküünal: 2-massielektroodi
• Manufacturer: VIEROL

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 4
• Alternatively:
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1.25
• Spanner Size: 21 mm
• Quality/ Grade: Ti Poly-V
• Packing Type: Carton
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Technical Information Number: CET8
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Name: CH CET8
• Manufacturer: CHAMPION

• Engine Code: C 16 NZ, X 16 SZR
• Construction Year from: 08.1995, 02.1996
• Construction Year to: 02.1996
• Block Separation:
• Võtmekaugus: 16 mm
• Keermemõõt: M14 x 1,25
• Keermepikkus (mm): 19
• Sädemeasetus (mm): 6
• Manufacturer: NGK
• Name: NG BKR5EK
• Additional information: BKR5EK
• Lisainfo: BKR5EK

Süüteküünal: Niklist keskelektrood, 2-massielektroodi, veakõrvaldused, 5 koom, koos lametihendikohaga, püsiv SAE-ühendus

• Engine Code: C 16 NZ, X 16 SZR
• Construction Year from: 08.1995, 02.1996
• Construction Year to: 02.1996
• Block Separation:
• Quantity per packing unit: 4
• Võtmekaugus: 16 mm
• Keermemõõt: M14 x 1,25
• Keermepikkus (mm): 19
• Sädemeasetus (mm): 6
• Manufacturer: NGK
• Name: NG V-LINE 23

Süüteküünal: Niklist keskelektrood, 2-massielektroodi, veakõrvaldused, 5 koom, koos lametihendikohaga, püsiv SAE-ühendus

• Required quantity: 4
• Alternatively:
• Quantity per packing unit: 10
• Elektroodide vahe (mm): 0,9
• Ühendustehnika: M4/SAE
• Keermemõõt: M14x1,25
• Võtmekaugus: 21 mm
• Kvaliteet/klass: Poly-V Tit
• Süüteküünal: 1-massielektrood, koos lametihendikohaga
• Keermepikkus (mm): 19
• Väändejõud alates [Nm]: 25
• Väändejõud kuni [Nm]: 30
• Takistus alates [koom]: 3
• Takistus kuni [koom]: 10
• Manufacturer: BERU

• Engine Code: C 16 NZ
• Construction Year to: 07.1995
• Väändejõud [Nm]: 25
• Elektroodide vahe (mm): 0,8
• Keermemõõt: M14 x 1.25
• Võtmekaugus: 20,8
• Süüteküünal: 1-massielektrood
• Keermepikkus (mm): 19
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 8EH188705121
• Manufacturer: HELLA

• Engine Code: C 16 NZ, X 16 SZR
• Süüteküünal: 1-massielektrood, koos takistusega
• Elektroodide vahe (mm): 0,9
• Keermemõõt: M14 x 1.25
• Keermepikkus (mm): 19
• Võtmekaugus: 16
• Tehniline informatsioon: Platinum-tip
• Manufacturer: MAGNETI MARELLI
• Name: MM SPB7206-9

• Engine Code: C 16 NZ, X 16 SZR
• Construction Year to: 08.1994, 08.1997
• Fuel Type: CNG/LPG
• Replace after km: 30,000
• Block Separation:
• Construction Year from: 09.1995
• Elektroodide vahe (mm): 1,1
• Keermemõõt: M14
• Võtmekaugus: 16 [mm]
• Pistikkontaktide arv: 1
• Keermepikkus (mm): 19
• Keerme samm (mm): 1,25
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: C 16 NZ, X 16 SZR
• Construction Year to: 08.1994, 08.1997
• Fuel Type: CNG/LPG
• Replace after km: 30,000
• Required quantity: 4
• Block Separation:
• Construction Year from: 09.1995
• Elektroodide vahe (mm): 0,7
• Väändejõud [Nm]: 28
• Keermemõõt: M 14 x 1,25
• Keermepikkus (mm): 19
• Võtmekaugus: 16
• Sädemeasetus (mm): 4
• Pistikkontaktide arv: 1
• Manufacturer: BOSCH
• Name: BS 0242236571

• Väändejõud [Nm]: 25
• Elektroodide vahe (mm): 1
• Keermemõõt: M14 x 1.25
• Võtmekaugus: 16
• Süüteküünal: 1-massielektrood
• Keermepikkus (mm): 19
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 8EH188706071
• Manufacturer: HELLA

• Vehicle Identification Number (VIN) from: 02BF1477
• Engine Code: C 16 NZ, X 16 SZR
• Required quantity: 4
• Fuel Type: CNG/LPG
• Quantity per packing unit: 4
• Keermepikkus (mm): 19
• Läbimõõt [mm]: 14
• Ühendustehnika: Solid SAE
• Võtmekaugus: 16
• Väändejõud [Nm]: 22
• Kaal (g): 43
• Brutokaal [g]: 46
• alternatiivne toode: IK20TT
• Manufacturer: DENSO
• Name: DN IK20TT
• Lisainfo: IK20TT DENSO
• Additional information: IK20TT DENSO

Süüteküünal: koos takistusega, 1-massielektrood, Iriidiumist keskelektrood

• Vehicle Identification Number (VIN) to: 02BF1476
• Engine Code: C 16 NZ, X 16 SZR
• Required quantity: 4
• Fuel Type: CNG/LPG
• Quantity per packing unit: 4
• Keermepikkus (mm): 19
• Läbimõõt [mm]: 14
• Riikide valik: Jaapan
• Ühendustehnika: Solid SAE
• Võtmekaugus: 20.6
• Väändejõud [Nm]: 22
• Kaal (g): 58
• Brutokaal [g]: 61
• alternatiivne toode: IW20TT
• Name: DN IW20TT
• Manufacturer: DENSO
• Quality class: Q

Süüteküünal: koos takistusega, 1-massielektrood, Iriidiumist keskelektrood Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: C 16 NZ
• Construction Year to: 07.1995
• Võtmekaugus: 20,8 mm
• Keermemõõt: M14 x 1,25
• Keermepikkus (mm): 19
• Sädemeasetus (mm): 3
• Manufacturer: NGK - NTK

Süüteküünal: ära kruvitav SAE-ühendus, Iriidiumist keskelektrood, 1-massielektrood, veakõrvaldused, 5 koom, koos lametihendikohaga

• Required quantity: 4
• Fuel Type: Liquefied Petroleum Gas (LPG)
• Alternatively:
• Version: with heat shield pip
• Recommended change interval [km]: 30,000
• Quantity per packing unit: 10
• Elektroodide vahe (mm): 0,7
• Ühendustehnika: SAE
• Keermemõõt: M14x1,25
• Võtmekaugus: 16 mm
• Süüteküünal: 1-massielektrood, koos lametihendikohaga
• Keermepikkus (mm): 19
• tehnilise informatsiooni number: 14 FR-7 DPPUS2
• SB tunnustatud pakend vaata spetsifikatsiooni:
• Väändejõud alates [Nm]: 25
• Väändejõud kuni [Nm]: 30
• Manufacturer: BERU

• Engine Code: C 16 NZ, X 16 SZR
• Construction Year from: 08.1995, 02.1996
• Construction Year to: 02.1996
• Block Separation:
• Võtmekaugus: 16 mm
• Keermemõõt: M14 x 1,25
• Keermepikkus (mm): 19
• Sädemeasetus (mm): 3,5
• Manufacturer: NGK

Süüteküünal: Iriidiumist keskelektrood, 1-massielektrood, veakõrvaldused, 5 koom, koos lametihendikohaga, püsiv SAE-ühendus

• Engine Code: C 16 NZ, X 16 SZR
• Construction Year from: 08.1995, 02.1996
• Construction Year to: 02.1996
• Block Separation:
• Võtmekaugus: 16 mm
• Keermemõõt: M14 x 1,25
• Süüteküünal: Iriidiumist keskelektrood, püsiv SAE-ühendus
• Kütuseliik: CNG/LPG
• Soovituslik vahetusintervall (km): 60 000
• Manufacturer: NGK
• Lisainfo: LPG1
• Additional information: LPG1

• Required quantity: 4
• Quantity per packing unit: 4
• Electrode Gap [mm]: 0.8
• Connector type: SAE
• Thread Size: M14x1.25
• Spanner Size: 21 mm
• Quality/ Grade: Pt GE
• Packing Type: Carton
• Thread Length [mm]: 19
• Technical Information Number: RN8WYPB3
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 10
• Packaging width [cm]: 2.5
• Packaging height [cm]: 2.5
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Name: CH CCH9804
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode

• Engine Code: C 16 NZ
• Construction Year to: 07.1995
• Võtmekaugus: 20,8 mm
• Keermemõõt: M14 x 1,25
• Kütuseliik: CNG/LPG
• Soovituslik vahetusintervall (km): 60 000
• Manufacturer: NGK
• Lisainfo: LPG2
• Additional information: LPG2

Süüteküünal: ära kruvitav SAE-ühendus, Iriidiumist keskelektrood