Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Width [mm]: 7
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Fitting Position: frontal sided
-
Lisainfo: Oil seal for camshaft,
front -
Additional information: Oil seal for camshaft,
front
- Required quantity: 2
- Fitting Position: frontal sided
- Engine Code: X 18 XE1
-
Material: MVQ
(silicone rubber) - Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 7
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist - Name: SIMER. WAKA ROZRZ¤DU OPEL OHC. 35X48X7
- Manufacturer: MAX
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 7
- Fitting Position: frontal sided
- Dust Cover: with dust lip
-
Swirl Type: Right-
hand Twist -
Material: MVQ
(silicone rubber) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Width [mm]: 7
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Fitting Position: frontal sided
- Weight [kg]: 0.014
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: frontal sided,
Cylinder Head - Required quantity: 2
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 7
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: frontal sided
- for manufacturer number: 8707159
- Manufacturer: KAMOKA
- Required quantity: 2
- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 7
-
Radial Shaft Seal Design: AW/
BS -
Swirl Type: Right-
hand Twist -
Material: MVQ
(silicone rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Fitting Position: transmission sided
- Outer Diameter [mm]: 98
- Inner Diameter [mm]: 80
- Width [mm]: 10
-
Lisainfo: Oil seal for crankshaft,
rear -
Additional information: Oil seal for crankshaft,
rear
- Fitting Position: frontal sided
-
Swirl Type: Right-
hand Twist - Height [mm]: 7
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Manufacturer: OYODO
- Engine Code: X 18 XE1
- Fitting Position: frontal sided
- Height 1 [mm]: 7
- Outer Diameter 1 [mm]: 48
- Inner Diameter 1 [mm]: 35
-
Material: FPM
(fluoride rubber) - for OE number: 55352607
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: COT
- Required quantity: 2
- Fitting Position: frontal sided
- Engine Code: X 18 XE1
-
Material: MVQ
(silicone rubber) - Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 7
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
- Fitting Position: frontal sided
-
Vehicle Identification Number (VIN) to: 2H999999,
2B999999, 21- 28999999 - Engine Code: X 18 XE1
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 30
- Outer Diameter [mm]: 40
- Height [mm]: 7
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
- Fitting Position: frontal sided
- for manufacturer number: 8707022
- Manufacturer: KAMOKA
- Fitting Position: Front
-
Fabrication Number: NUP-
PL- 006 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Number to: 20DR5879
- Inner Diameter [mm]: 80
- Outer Diameter [mm]: 98
- Height [mm]: 10
-
Swirl Type: Left-
hand Twist - Fitting Position: transmission sided
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: transmission sided
- for manufacturer number: 8707079
- Manufacturer: KAMOKA
- Fitting Position: frontal sided
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 40
- Height [mm]: 7
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist -
Material: FPM
(fluoride rubber) - Dust Cover: with dust lip
- Colour: brown
- Manufacturer: ELRING
- Required quantity: 2
- Engine Code: X 18 XE1
- Block Separation:
- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 7
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- Lisainfo: AJU15012600
- Additional information: AJU15012600
- Fitting Position: transmission sided
- Height [mm]: 10
- Inner Diameter [mm]: 80
- Outer Diameter [mm]: 98
- Manufacturer: OYODO
- Fitting Position: frontal sided
- Outer Diameter 1 [mm]: 40
-
Material: FPM
(fluoride rubber) - Height 1 [mm]: 7
- Dust Cover: with dust lip
-
Swirl Type: Right-
hand Twist - Inner Diameter 1 [mm]: 30
- Name: CO 19036806
- Manufacturer: CORTECO
- Engine Code: X 18 XE1
- Fitting Position: Cylinder Head
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: X 18 XE1
- Fitting Position: frontal sided
- Height 1 [mm]: 7
- Outer Diameter 1 [mm]: 48
- Inner Diameter 1 [mm]: 35
-
Material: FPM
(fluoride rubber) -
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Manufacturer: CORTECO
- Name: CO 12016300
- Engine Code: X 18 XE1
- Block Separation:
- Fitting Position: frontal sided
- Manufacturer: VAICO
-
Additional information: V40-
1806 VEMO -
Lisainfo: V40-
1806 VEMO
Vehicle Identification Number (VIN) from: 32000001 ->, 35000001 ->, 36000001 ->, 38000001 ->, 3B000001 ->, 3H000001 ->, 4G000001 -> General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: transmission sided
- Inner Diameter [mm]: 80
- Outer Diameter [mm]: 98
- Height [mm]: 10
-
Radial Shaft Seal Design: A/
BS -
Swirl Type: Left-
hand Twist -
Material: FPM
(fluoride rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Fitting Position: transmission sided
- Engine Number to: 20DR5879
- Engine Code: X 18 XE1
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 80
- Outer Diameter [mm]: 98
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
-
Swirl Type: Left-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
- Fitting Position: transmission sided
- Height [mm]: 11
- Outer Diameter [mm]: 104
- Inner Diameter [mm]: 90
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: BGA USZCZELKI
- Fitting Position: transmission sided
- Engine Number to: 20DR5879
- Outer Diameter 1 [mm]: 98
-
Material: FKM
(fluorocarbon rubber) - Height 1 [mm]: 10
- Inner Diameter 1 [mm]: 80
- Name: CO 49464345
- Manufacturer: CORTECO
- Thickness [mm]: 10
- Inner Diameter [mm]: 80
- Outer Diameter [mm]: 98
-
Material: MVQ
(silicone rubber) - Fitting Position: transmission sided
- Weight [kg]: 0.04
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Number to: 20DR5879
- Fitting Position: transmission sided
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 98
- Inner Diameter 1 [mm]: 80
-
Material: FPM
(fluoride rubber) - for OE number: 90352112
-
Swirl Type: Left-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT
- Thickness [mm]: 10
- Inner Diameter [mm]: 80
- Outer Diameter [mm]: 98
-
Material: MVQ
(silicone rubber) - Fitting Position: transmission sided
- Weight [kg]: 0.04
- Name: SW 40 90 5099
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: frontal sided
-
Vehicle Identification Number (VIN) from: 3B000001,
31- 38999999, 3H000001 - Engine Code: X 18 XE1
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 31.5
- Outer Diameter [mm]: 42
- Height [mm]: 7
- Radial Shaft Seal Design: AB SL
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
- Engine Code: X 18 XE1
- Block Separation:
- Fitting Position: frontal sided
- Height 1 [mm]: 7
- Outer Diameter 1 [mm]: 42
- Inner Diameter 1 [mm]: 31.5
-
Material: FPM
(fluoride rubber) - for OE number: 71739825
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
Vehicle Identification Number (VIN) from: 32000001 ->, 35000001 ->, 36000001 ->, 38000001 ->, 3B000001 ->, 3H000001 ->, 4G000001 ->
- Fitting Position: transmission sided
- Inner Diameter [mm]: 80
- Outer Diameter [mm]: 98
- Height [mm]: 10
- Manufacturer: AJUSA
- Engine Number from: 20DR5880
- Inner Diameter [mm]: 80
- Outer Diameter [mm]: 98
- Height [mm]: 14.6
-
Swirl Type: Left-
hand Twist - Fitting Position: transmission sided
-
Material: PTFE
(polytetrafluoroethylene) - Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: X 18 XE1
-
Engine Number from: 20DR5880 -
> - Fitting Position: transmission sided
- Height 1 [mm]: 14.6
- Outer Diameter 1 [mm]: 98
- Inner Diameter 1 [mm]: 80
-
Material: PTFE
(polytetrafluoroethylene) -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT
- Fitting Position: transmission sided
- Engine Number from: 20DR5880
- Engine Code: X 18 XE1
-
Material: PTFE
(polytetrafluoroethylene) - Inner Diameter [mm]: 80
- Outer Diameter [mm]: 98
- Height [mm]: 14.6
- Radial Shaft Seal Design: A
-
Swirl Type: Left-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks