Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)



- Width [mm]: 7
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Fitting Position: frontal sided
-
Lisainfo: Oil seal for camshaft,
front -
Additional information: Oil seal for camshaft,
front


- Fitting Position: frontal sided
- Radial Shaft Seal Design: ASW
- Dust Cover: with dust lip
-
Swirl Type: Right-
hand Twist - Outer Diameter [mm]: 42
- Height [mm]: 8
- Manufacturer: DELLO AUTOMEGA

- Fitting Position: frontal sided
- Engine Code: X 16 SZR
-
Material: MVQ
(silicone rubber) - Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 7
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist - Name: SIMER. WAKA ROZRZ¤DU OPEL OHC. 35X48X7
- Manufacturer: MAX


- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 7
- Fitting Position: frontal sided
- Dust Cover: with dust lip
-
Swirl Type: Right-
hand Twist -
Material: MVQ
(silicone rubber) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Width [mm]: 7
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Fitting Position: frontal sided
- Weight [kg]: 0.014
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.




-
Fitting Position: frontal sided,
Cylinder Head - Required quantity: 1
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 7
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.



- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 7
-
Radial Shaft Seal Design: AW/
BS -
Swirl Type: Right-
hand Twist -
Material: MVQ
(silicone rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING



- Fitting Position: transmission sided
- Outer Diameter [mm]: 98
- Inner Diameter [mm]: 80
- Width [mm]: 10
-
Lisainfo: Oil seal for crankshaft,
rear -
Additional information: Oil seal for crankshaft,
rear


- Fitting Position: frontal sided
- Height [mm]: 8
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 42
- Manufacturer: JPN


- Fitting Position: frontal sided
-
Swirl Type: Right-
hand Twist - Height [mm]: 7
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Manufacturer: OYODO




- Engine Code: X 16 SZR
- Fitting Position: frontal sided
- Height 1 [mm]: 7
- Outer Diameter 1 [mm]: 48
- Inner Diameter 1 [mm]: 35
-
Material: FPM
(fluoride rubber) - for OE number: 55352607
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: COT


- Fitting Position: frontal sided
- Engine Code: X 16 SZR
-
Material: MVQ
(silicone rubber) - Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 7
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI

- Fitting Position: frontal sided
- Height [mm]: 8
- Outer Diameter [mm]: 42
- Inner Diameter [mm]: 26
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: BGA USZCZELKI



- Fitting Position: frontal sided
- for manufacturer number: 8707022
- Manufacturer: KAMOKA


- Inner Diameter [mm]: 80
- Outer Diameter [mm]: 98
- Height [mm]: 10
-
Swirl Type: Left-
hand Twist - Fitting Position: transmission sided
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.





- Engine Code: X 16 SZR
- Fitting Position: frontal sided
- Height 1 [mm]: 8
- Outer Diameter 1 [mm]: 42
- Inner Diameter 1 [mm]: 26
-
Material: FPM
(fluoride rubber) - for OE number: 90501719
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT



- Fitting Position: transmission sided
- for manufacturer number: 8707079
- Manufacturer: KAMOKA


- Engine Code: X 16 SZR
- Block Separation:
- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 48
- Height [mm]: 7
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- Lisainfo: AJU15012600
- Additional information: AJU15012600



- Fitting Position: frontal sided
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 42
- Height [mm]: 8
- Height 2 [mm]: 6
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist -
Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING


- Fitting Position: transmission sided
- Height [mm]: 10
- Outer Diameter [mm]: 98
- Inner Diameter [mm]: 80
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: BGA


- Fitting Position: transmission sided
- Height [mm]: 10
- Inner Diameter [mm]: 80
- Outer Diameter [mm]: 98
- Manufacturer: OYODO


- Fitting Position: frontal sided
- Engine Code: X 16 SZR
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 26
- Outer Diameter [mm]: 42
- Height [mm]: 8
- Radial Shaft Seal Design: AB SL
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI



- Engine Code: X 16 SZR
- Fitting Position: Cylinder Head
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.



- Fitting Position: transmission sided
- Inner Diameter [mm]: 80
- Outer Diameter [mm]: 98
- Height [mm]: 10
-
Radial Shaft Seal Design: A/
BS -
Swirl Type: Left-
hand Twist -
Material: FPM
(fluoride rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING


- Fitting Position: transmission sided
- Engine Code: X 16 SZR
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 80
- Outer Diameter [mm]: 98
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
-
Swirl Type: Left-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI


- Fitting Position: Pulley side
-
Name: VOLLI RONGASTIHENDIKOMPLEKT,
MOOTOR - Manufacturer: COT


- Engine Code: X 16 SZR
- Fitting Position: frontal sided
- Inner Diameter [mm]: 26
- Outer Diameter [mm]: 42
- Height [mm]: 8
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: AJU


- Fitting Position: transmission sided
- Outer Diameter 1 [mm]: 98
-
Material: FKM
(fluorocarbon rubber) - Height 1 [mm]: 10
- Inner Diameter 1 [mm]: 80
- Name: CO 49464345
- Manufacturer: CORTECO


- Thickness [mm]: 10
- Inner Diameter [mm]: 80
- Outer Diameter [mm]: 98
-
Material: MVQ
(silicone rubber) - Fitting Position: transmission sided
- Weight [kg]: 0.04
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.





- Engine Code: X 16 SZR
- Fitting Position: transmission sided
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 98
- Inner Diameter 1 [mm]: 80
-
Material: FPM
(fluoride rubber) - for OE number: 90352112
-
Swirl Type: Left-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT


- Thickness [mm]: 10
- Inner Diameter [mm]: 80
- Outer Diameter [mm]: 98
-
Material: MVQ
(silicone rubber) - Fitting Position: transmission sided
- Weight [kg]: 0.04
- Name: SW 40 90 5099
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Engine Code: X 16 SZR
- Fitting Position: transmission sided
- Inner Diameter [mm]: 80
- Outer Diameter [mm]: 98
- Height [mm]: 10
- Manufacturer: AJUSA