Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)



- Length [mm]: 57
- Number of connectors: 2
-
Supplementary Article/Supplementary Info: without gasket/
seal - Manufacturer: JP GROUP
- Lisainfo: Temperature sensor for air intake
- Additional information: Temperature sensor for air intake






- for OE number: 12 38 079
- Length [mm]: 57
-
Supplementary Article/Supplementary Info: without gasket/
seal -
Fabrication Number: ECT-
PL- 001 - Manufacturer: NTY
-
Name: NTY ECT-
PL- 001
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.




- Sensor Type: Inductive Sensor
- Number of pins: 3
-
Fabrication Number: ECP-
PL- 014 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.




- Engine Code: Z 16 XE
- Length [mm]: 57
- Material: Plastic
- Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.01
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV677
- Manufacturer: ESEN SKV





-
for OE number: 12614970,
77 00 106 644 - Number of pins: 3
- Connector Shape: oval
- Pressure from [kPA]: 20
- Pressure to [kPA]: 100
-
Fabrication Number: ECM-
PL- 004 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


Manufacturer: VERNET





-
Fabrication Number: ECP-
PL- 041 - Number of pins: 3
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.




-
Fabrication Number: ECP-
PL- 012 - Manufacturer: NTY






- Cable Length [mm]: 236
-
Fabrication Number: ESS-
PL- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


- Number of pins: 2
- Housing Colour: black
- Name: DE TS10521
- Manufacturer: DELPHI


- Engine Code: Z 16 XE
-
Vehicle Identification Number (VIN) to: 22999999,
25999999, 26999999, 28999999, 2B999999 -
Thread Size: M12x1,
5 - Spanner Size: 19
-
Corresponds to the original part in colour: white,
green, black -
for article number: 1.880.170,
1.880.190 - Name: EP 1.830.239
- Manufacturer: EPS


- Engine Code: Z 16 XE
-
Vehicle Identification Number (VIN) to: 22999999,
25999999, 26999999, 28999999, 2B999999 -
Thread Size: M12x1,
5 - Spanner Size: 19
-
Corresponds to the original part in colour: white,
green, black -
for article number: 7.8170,
7.8190 - Manufacturer: FACET


- Connector Shape: oval
- Number of pins: 2
- Sensor Type: NTC Sensor
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Length [mm]: 57
- Number of connectors: 2
- Weight [kg]: 0.01
-
Supplementary Article/Supplementary Info: without gasket/
seal - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Pressure from [kPA]: 20
- Pressure to [kPA]: 10
- Number of pins: 3
-
for OE number: 25085-
00Q0B - Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.


- Engine Code: Z16XE
- Required quantity: 1
- Manufacturer: BREMI


- Engine Code: Z 16 XE
- Name: EP 1.994.033
- Manufacturer: EPS




- Engine Code: Z16XE
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.01
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV105





























- Engine Code: Z 16 XE
-
Vehicle Identification Number (VIN) to: 22999999,
25999999, 26999999, 28999999, 2B999999 - Block Separation:
- Manufacturer: BOSCH


- Engine Code: Z 16 XE
- Fitting Position: Suction Pipe
- Connector Shape: oval
- Pressure from [bar]: 0.2
- Pressure to [bar]: 1
- Number of pins: 3
-
for OE number: 12 47 047,
71739292, 7700 106 644, 98131025 - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Tightening torque to [Nm]: 22
- Sensor Type: NTC Sensor
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Colour Coding: blue
- Name: MM SPA103
- Manufacturer: MAGNETI MARELLI


- Number of pins: 2
- Supplementary Article/Info 2: with cable
- Connector Shape: oval
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Number of pins: 2
- Connector Shape: oval
- Cable Length [mm]: 400
- for OE number: 6238370
- Manufacturer: MEAT&DORIA





- for OE number: 10456585
- Sensor Type: Active sensor
- Manufacturer: KAMOKA



- Length [mm]: 590
- Number of pins: 3
- Sensor Type: Hall Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.


























- Construction Year to: 03.2004
-
Engine Code: Z 16 XE,
Z16YNG, C16SEL - Cable Length [mm]: 236
- Number of pins: 2
- Manufacturer: DELPHI
-
Name: DE AS10134-
12B1


- Pressure from [kPA]: 20
- Pressure to [kPA]: 100
- Manufacturer: FAST




- Length [mm]: 180
- Cable Length [mm]: 460
-
Fabrication Number: ESL-
PL- 012 - Manufacturer: NTY
Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Thread pre-greased
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.




- Length [mm]: 530
- Cable Length [mm]: 245
-
Fabrication Number: ESL-
PL- 003 - Manufacturer: NTY
Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Thread pre-greased
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.




-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


- Pistikkontaktide arv: 3
- Surve alates [kPA]: 20
-
Name: DE PS20091-
12B1 - Manufacturer: DELPHI




-
Thread Size: M 18X1,
5 - Cable Length [mm]: 210
-
Fitting Position: Front,
before catalytic converter -
Oxygen Sensor: Regulating Sensor,
Thread pre- greased -
Fabrication Number: ESL-
PL- 006 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


- Engine Code: Z 16 XE
- Length [mm]: 57
- Number of connectors: 2
- Weight [kg]: 0.02
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Supplementary Article/Info 2: with cable
- Length [mm]: 315
- Height [mm]: 25.8
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Manufacturer: VERNET




-
Oxygen Sensor: Switching-
type Oxygen Sensor, Thread pre- greased -
Fabrication Number: ESL-
UV- 001 - Manufacturer: NTY
-
Name: NTY ESL-
UV- 001
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


- Connector Shape: rectangular
- Number of pins: 3
- Supplementary Article/Info 2: with cable
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Pinge [V]: 12
- Pistikkontaktide arv: 2
- Väändejõud [Nm]: 20
- Piirangutega toode/piirangu info 2: koos kaabliga
- Vastab originaalosa värvile: must
- Pistikute teostus: Lamepistik
- Pikkus (mm): 413
- Pistikukatte kuju: ristkülik
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Name: HE 6PG013114431
- Manufacturer: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.


- Measuring Range from [kPa]: 15
- Measuring Range to [kPa]: 100
- Measuring Range from [V]: 0.21
- Measuring Range to [V]: 4.75
- Number of connectors: 3
- Manufacturer: VERNET




- Construction Year to: 02.2004
- Engine Code: Z 16 XE
- Sensor Type: Hall Sensor
- Number of pins: 3
- Voltage [V]: 12
- Connector Shape: oval
- Supplementary Article/Info 2: with cable
- Weight [kg]: 0.11
- Name: VA 253857
- Manufacturer: VALEO





























































- Engine Code: X 16 XEL
- Length [mm]: 615
- Number of connectors: 3
- Colour: black
- Cable Length [mm]: 520
- Sensor Type: Active sensor
- Number of pins: 3
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 14.7
- Supplementary Article/Info 2: with cable
- Connector Shape: oval
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


- Engine Code: X 16 XEL
- Length [mm]: 475
- Number of pins: 3
- Manufacturer: DELPHI
- Name: DE SS10885
- Quality class: PJ
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"


- Engine Code: X16XEL
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with cable
- Housing Colour: black
- Manufacturer: BREMI


- Engine Code: Z 16 XE
- Number of pins: 3
- Pressure from [kPA]: 20
- Pressure to [kPA]: 100
- for OE number: 71739292
- Manufacturer: MEAT&DORIA





- Engine Code: Z 16 XE
- Length [mm]: 310
- Alternatively:
- Number of pins: 3
- Fitting Depth [mm]: 25.5
- Housing Colour: black
- Weight [kg]: 0.072
- Alternative Repair Kit: 550053
- Manufacturer: ERA





- Oxygen Sensor: Regulating Sensor
- Number of circuits: 4
- Manufacturer: KAMOKA


- Measuring Range from [kPa]: 20
- Measuring Range to [kPa]: 100
- Measuring Range from [V]: 0.525
- Measuring Range to [V]: 4.775
- Number of connectors: 3
- Manufacturer: VERNET



- Overall Length [mm]: 400
- Number of pins: 4
- Oxygen Sensor: Heated
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor










































































-
Engine Code: Z 16 XE,
Z16YNG - Length [mm]: 265
- Number of pins: 3
- Manufacturer: DELPHI
-
Name: DE SS10518-
12B1


- Supplementary Article/Info 2: with cable
- Length [mm]: 525
- Height [mm]: 14.7
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Manufacturer: VERNET





























































- Engine Code: Z16XE
- Length [mm]: 410
- Number of connectors: 3
- Required quantity: 1
- Colour: black
- Cable Length [mm]: 315
- Number of pins: 3
- Rated Voltage [V]: 12
- Supplementary Article/Info 2: with cable
- Number of mounting bores: 2
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.




- Construction Year to: 02.2004
- Engine Code: Z 16 XE
- Sensor Type: Hall Sensor
- Number of pins: 3
- Voltage [V]: 12
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
- Manufacturer: VALEO


- Engine Code: Z 16 XE
- Length [mm]: 385
- Name: EP 1.953.316
- Manufacturer: EPS


- Engine Code: Z 16 XE
- Length [mm]: 385
- Manufacturer: FACET




-
Vehicle Identification Number (VIN) from: 22000001,
25000001, 26000001, 28000001 - Engine Code: Z 16 XE
-
Oxygen Sensor: Diagnostic Probe,
Heated - Fitting Position: after catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 314
-
Thread Size: M18x1,
5 - Spanner Size: 22
- for OE number: 93189975
- Manufacturer: DELLO AUTOMEGA


- Engine Code: Z 16 XE
- Length [mm]: 400
- Number of connectors: 3
- Cable Length [mm]: 315
- Weight [kg]: 0.06
- Supplementary Article/Info 2: with cable
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Rated Voltage [V]: 12
- Cable Length 1 [mm]: 265
- Number of connectors: 3
- Number of mounting bores: 2
-
Operating temperature from [°C]: -
40 - Operating temperature to [°C]: 125
- Sensor Type: Hall Sensor
- Connector Shape: rectangular
- Colour: black
- Name: SN CMP171.11
- Manufacturer: SNR


- Engine Code: Z 16 XE
- Length [mm]: 400
- Number of connectors: 3
- Cable Length [mm]: 315
- Weight [kg]: 0.06
- Supplementary Article/Info 2: with cable
- Name: SW 40 92 2373
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.





























- Engine Code: Z 16 XE
- Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY





-
Oxygen Sensor: Switching-
type Oxygen Sensor - Guarantee: 3 years guarantee
- Weight [kg]: 0.12
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV121





























































- Engine Code: Z 16 XE
- Construction Year to: 01.2004
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
-
Vehicle Identification Number (VIN) from: 22000001,
25000001, 26000001, 28000001 - Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
- Pikkus (mm): 350
- Ühenduste arv: 4
- Lambda andur: Keere eelmääritud
- Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.





-
Engine Code: Z 16 XE,
X 16 XEL - Block Separation:
- Construction Year to: 03.2004
- Cable Length [mm]: 520
- Guarantee: 3 years guarantee
- Weight [kg]: 0.13
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV132
Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Switching-type Oxygen Sensor Fitting Position: before catalytic converter, after catalytic converter Vehicle Identification Number (VIN) from: 22000001, 25000001, 26000001, 28000001, 2H, 4G000001


- Engine Code: Z 16 XE
- Fitting Position: before catalytic converter
-
Oxygen Sensor: Regulating Sensor,
Planar Sensor - Number of pins: 4
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Lambda andur: soojendatud
- Ülekandeliinide arv: 4
- Manufacturer: GEBE


- Engine Code: X 16 XEL
- Oxygen Sensor: Regulating Sensor
- Fitting Position: Front
- Length [mm]: 375
- Number of connectors: 4
- Manufacturer: VERNET


- Engine Code: Z16XE
- Voltage [V]: 12
-
Corresponds to the original part in colour: blue,
grey - Length [mm]: 75
- Sensor Type: Hall Sensor
- Number of pins: 3
- Number of mounting bores: 2
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: HE 6PU009121931
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.


- Engine Code: Z 16 XE
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: ENERGY


- Engine Code: Z 16 XE
-
Oxygen Sensor: Diagnostic Probe,
Planar Sensor - Fitting Position: after catalytic converter
-
Vehicle Identification Number (VIN) from: 22000001,
25000001, 26000001, 28000001 - Block Separation:
- Number of pins: 4
- Length [mm]: 335
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Required quantity: 1
- Engine Code: X16XEL
-
Pressure [Pa] from: 20,
000 -
Pressure [Pa] to: 100,
000 - Voltage [V]: 5
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PP009400221
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.




-
Oxygen Sensor: Regulating Sensor,
Planar Sensor, Heated - Fitting Position: before catalytic converter
- Engine Code: X 16 XEL
- Cable Length [mm]: 400
- Manufacturer: DELPHI
-
Name: DE ES20135-
12B1 - Quality class: PJ
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"


- Required quantity: 1
- Engine Code: Z16XE
- Supplementary Article/Info 2: without cable
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: HE 6PP009400011
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.




-
Exhaust System: for pre-
catalytic converter - Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Quality: OE
- Weight [g]: 103
- Gross Weight [g]: 147
- Manufacturer: DENSO
-
Name: DN DOX-
0114 - Quality class: Q
Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor
Additional information: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)"



- Engine Code: X 16 XEL
-
Oxygen Sensor: Heated,
Regulating Sensor -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 400
- Weight [kg]: 0.093
- Manufacturer: FEBI
Vehicle Identification Number (VIN) to: *********1G******, *********1H******, *********12999999, *********15999999, *********16999999, *********18999999 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.




- Oxygen Sensor: Regulating Sensor
- Engine Code: Z 16 XE
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Pikkus (mm): 320
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
09 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV040


-
Oxygen Sensor: Diagnostic Probe,
Planar Sensor, Heated -
Engine Code: Z 16 XE,
X 16 XEL - Block Separation:
- Cable Length [mm]: 520
- Manufacturer: DELPHI
-
Name: DE ES20291-
12B1
Fitting Position: before catalytic converter, after catalytic converter Vehicle Identification Number (VIN) from: 22000001, 25000001, 26000001, 28000001, 2H, 4G000001


-
Oxygen Sensor: Diagnostic Probe,
Planar Sensor, Heated - Fitting Position: after catalytic converter
-
Vehicle Identification Number (VIN) to: 12999999,
15999999, 16999999, 18999999, 1G, 1H - Engine Code: Z 16 XE
- Cable Length [mm]: 780
-
Name: DE ES20292-
12B1 - Manufacturer: DELPHI





- Lambda andur: Bistabiilne andur
- Kaablipikkus (mm): 290
- valikuliselt:
- Piirangutega toode/piirangu info 2: ilma pistikuta
- Ülekandeliinide arv: 4
- alternatiivne remondikomplekt: 570111
- Manufacturer: ERA


-
Oxygen Sensor: Diagnostic Probe,
Planar Sensor, Heated - Vehicle Identification Number (VIN) from: 22000001
- Engine Code: Z 16 XE
- Cable Length [mm]: 300
- Manufacturer: DELPHI
-
Name: DE ES20284-
12B1 - Quality class: PJ
Additional information: "Tootja: DELPHI
MERIVA, 05.03-05.10
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
MERIVA, 05.03-05.10
(kvaliteediklass: PJ)"



- Engine Code: X 16 XEL
-
Oxygen Sensor: Heated,
Regulating Sensor -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 400
- Weight [kg]: 0.093
- Name: SW 33 10 3134
- Manufacturer: SWAG
Vehicle Identification Number (VIN) to: *********1G******, *********1H******, *********12999999, *********15999999, *********16999999, *********18999999 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



- Engine Code: Z 16 XE
-
Oxygen Sensor: Heated,
Diagnostic Probe -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 817
- Weight [kg]: 0.123
- Name: SW 33 10 4118
- Manufacturer: SWAG
Vehicle Identification Number (VIN) to: *********1G******, *********1H******, *********12999999, *********15999999, *********16999999, *********18999999 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



- Fitting Position: after catalytic converter
-
Oxygen Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 300
- Weight [kg]: 0.085
- Manufacturer: FEBI
Vehicle Identification Number (VIN) from: *********2H******, *********22000001, *********25000001, *********26000001, *********28000001, *********4G000001 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Engine Code: Z 16 XE
- Fitting Position: before catalytic converter
- Length [mm]: 180
- Cable Length [mm]: 300
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.997.007
- Number of circuits: 4
- Name: EP 1.998.214
- Manufacturer: EPS
Vehicle Identification Number (VIN) from: 22000001, 25000001, 26000001, 28000001, 4G000001, 2H Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased































- Engine Code: Z 16 XE
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH



- Engine Code: X 16 XEL
-
Vehicle Identification Number (VIN) to: 1-
999999 - Oxygen Sensor: Regulating Sensor
- Ülekandeliinide arv: 4
- Piirangutega toode/piirangu info 2: ilma pistikuta
- Manufacturer: NGK



- Fitting Position: after catalytic converter
-
Oxygen Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 300
- Weight [kg]: 0.085
- Name: SW 33 10 3133
- Manufacturer: SWAG
Vehicle Identification Number (VIN) from: *********2H******, *********22000001, *********25000001, *********26000001, *********28000001, *********4G000001 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Engine Code: Z 16 XE
- Required quantity: 1
- Pressure from [kPA]: 20
- Pressure to [kPA]: 100
- Output Voltage, from [V]: 0.516
- Output Voltage, up to [V]: 4.775
- Name: EP 1.993.011
- Manufacturer: EPS


- Engine Code: Z 16 XE
- Pressure from [kPA]: 20
- Pressure to [kPA]: 100
- Output Voltage, from [V]: 0.516
- Output Voltage, up to [V]: 4.775
- Manufacturer: FACET


- Engine Code: X 16 XEL
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: Front
- Length [mm]: 300
- Number of connectors: 4
- Manufacturer: VERNET































- Engine Code: Z 16 XE
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
-
Vehicle Identification Number (VIN) to: 12999999,
16999999, 18999999 - Block Separation:
-
Vehicle Identification Number (VIN) from: 22000001,
25000001, 26000001, 28000001 - Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH





























































- Construction Year to: 02.2004
- Engine Code: Z16XE
- Required quantity: 1
- Sensor Type: Hall Sensor
- Number of pins: 3
- Number of connectors: 3
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 8.3
- Supplementary Article/Info 2: without cable
- Connector Shape: oval
- Resistor [kOhm]: 13.4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.






-
Exhaust System: for pre-
catalytic converter - Thread Size: M18x1.5
- Cable Length [mm]: 775
- Number of pins: 4
- Manufacturer Restriction: DENSO
- for OE number: 855353
- Quality: OE
- Weight [g]: 119
- Gross Weight [g]: 149
- Manufacturer: DENSO
Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor








- Vehicle Identification Number (VIN) from: 22000001
- Thread Size: M18x1.5
- Cable Length [mm]: 290
- Number of pins: 4
- Manufacturer Restriction: DENSO
- for OE number: 855524
- Quality: OE
- Weight [g]: 90
- Gross Weight [g]: 120
- Manufacturer: DENSO
-
Name: DN DOX-
1575
Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Switching-type Oxygen Sensor


- Engine Code: Z 16 XE
- Oxygen Sensor: Regulating Sensor
- Fitting Position: Front
- Length [mm]: 540
- Number of connectors: 4
- Manufacturer: VERNET






























- Engine Code: Z 16 XE
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
-
Vehicle Identification Number (VIN) to: 12999999,
16999999, 18999999 - Manufacturer: BOSCH






























- Engine Code: Z 16 XE
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Manufacturer: BOSCH


- Fitting Position: before catalytic converter
- Engine Code: Z16XE
- Oxygen Sensor: Regulating Sensor
- Cable Length [mm]: 630
- Number of pins: 4
- Exhaust System: before catalytic converter
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PA358066001
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.






























- Engine Code: Z 16 XE
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
-
Vehicle Identification Number (VIN) from: 22000001,
25000001, 26000001, 28000001 - Number of circuits: 4
- Overall Length [mm]: 314
- Manufacturer: BOSCH
- Name: BS F00HL00428



- Number of pins: 6
- Transmission Type: Automatic Transmission
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Code Letter: BL
- Colour: black
- Manufacturer: METZGER


- Engine Code: Z...
- Number of mounting bores: 3
- Number of pins: 6
- Transmission Type: Manual Transmission
- Code Letter: BM
-
Left-/right-hand drive vehicles: for right-
hand drive vehicles - Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.













































- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: oval
- Number of pins: 3
- Fitting Depth [mm]: 8.1
- Supplementary Article/Info 2: with seal ring


- Engine Code: X 16 XEL
- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: oval
- Number of pins: 3
- Fitting Depth [mm]: 14.5
- Cable Length [mm]: 475










































- Engine Code: Z 16 XE
- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: oval
- Number of pins: 3
- Cable Length [mm]: 265
- Supplementary Article/Info 2: with seal ring