• Construction Year to: 02.2004
• Engine Code: Z 16 XE
• alternatively:
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 550
• Weight [kg]: 0.12
• Manufacturer: VALEO
• Name: VA 254089

• Number of pins: 2
• Connector Shape: oval
• Fabrication Number: ECT-PL-000
• Manufacturer: NTY
• Name: NTY ECT-PL-000

• Length [mm]: 61
• Spanner Size: 19
• Manufacturer: KAMOKA

• Length [mm]: 57
• Number of connectors: 2
• Supplementary Article/Supplementary Info: without gasket/seal
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for air intake
• Additional information: Temperature sensor for air intake

• Fabrication Number: ECT-CH-006
• Manufacturer: NTY

Manufacturer: FAST

• for OE number: 12 38 079
• Length [mm]: 57
• Supplementary Article/Supplementary Info: without gasket/seal
• Fabrication Number: ECT-PL-001
• Manufacturer: NTY
• Name: NTY ECT-PL-001

• Thread Size: M12x1.5
• Spanner Size: 19
• Manufacturer: FAST

• Engine Code: Z 16 XE
• Length [mm]: 61
• Spanner Size: 19
• Colour: grey
• Number of pins: 2
• Thread Size: M12 x 1,5, M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Number of pins: 2
• Sensor Type: Inductive Sensor
• Model Year from: 2007
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: Z16XE
• Vehicle Identification Number (VIN) to: 22999999, 25999999, 26999999, 28999999, 2B999999
• Number of pins: 1
• Thread Size: 1/8x27NPT
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Fabrication Number: ECP-PL-014
• Manufacturer: NTY

• Connector Shape: oval
• Sensor Type: NTC Sensor
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 2
• Colour Coding: blue
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: Z 16 XE
• Length [mm]: 57
• Material: Plastic
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV677
• Manufacturer: ESEN SKV

• Vehicle Identification Number (VIN) to: 22999999, 25999999, 26999999, 28999999, 2B999999
• Engine Code: Z 16 XE
• Number of pins: 1
• Packaging length [cm]: 3.5
• Packaging width [cm]: 6
• Packaging height [cm]: 3.5
• Weight [kg]: 0.013
• for OE number: 3439088, 1342561, 1342568, 1342569, 90246852

• for OE number: 12 38 938
• Length [mm]: 69
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: ECP-PL-009
• Manufacturer: NTY

• for OE number: 12614970, 77 00 106 644
• Number of pins: 3
• Connector Shape: oval
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Fabrication Number: ECM-PL-004
• Manufacturer: NTY

• Fitting Position: both sides, Rear, inner, Front, Centre
• Supplementary Article/Info 2: for retrofitted equipment
• Fabrication Number: EPDC-ME-008
• Manufacturer: NTY

• Engine Code: Z 16 XE
• Number of pins: 2
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: MAX
• Lisainfo: 21-0340
• Additional information: 21-0340

• Engine Code: Z 16 XE
• Length [mm]: 57
• Number of pins: 2
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: MAX

• Engine Code: Z 16 XE
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Number of pins: 2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV701

• Connector Shape: oval
• Number of pins: 2
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front
• Socket colour: blue
• Number of pins: 4
• Sensor Type: Ultrasonic Sensor
• Assy./disassy. by qualified personnel required!:
• for OE number: 9198958
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: Z 16 XE
• Length [mm]: 61
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: grey
• Screw length below head [mm]: 28
• Weight [kg]: 0.023
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 26999999/28999999
• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Engine Code: Z 16 XE, X 16 XEL
• Vehicle Identification Number (VIN) to: 22999999, 25999999, 26999999, 28999999, 2B999999
• Block Separation:
• Vehicle Identification Number (VIN) from: 32000001, 35000001, 36000001, 3B000001, 4G000001
• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ovaalne
• Pistikkontaktide arv: 2
• Võtmekaugus: 19
• Keermemõõt: M12x1.5
• OE-numbri jaoks: 46462179
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF
• Additional information: 727005 NRF
• Lisainfo: 727005 NRF

• Fitting Position: both sides, Rear
• Connector Shape: oval
• Number of pins: 4
• Sensor Type: Ultrasonic Sensor
• Fabrication Number: EPDC-PL-002
• Manufacturer: NTY

• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Vehicle Identification Number (VIN) to: 22999999, 25999999, 26999999, 28999999, 2B999999
• Engine Code: Z 16 XE
• Connector Shape: round
• Material: Plastic
• Number of pins: 1
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: S13
• Thread Size: NPTF1/8

• Fabrication Number: ECP-PL-041
• Number of pins: 3
• Manufacturer: NTY

• Fabrication Number: ECP-PL-012
• Manufacturer: NTY

• Engine Code: Z 16 XE
• Length [mm]: 61
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: grey
• Screw length below head [mm]: 28
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: SW 40 92 8381
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cable Length [mm]: 236
• Fabrication Number: ESS-PL-000
• Manufacturer: NTY

• Operating voltage [V]: 12
• Sensor Type: Slider
• Rotation Direction: Anticlockwise rotation
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Manufacturer: JP GROUP
• Lisainfo: Potentiometer for throttle valve body
• Additional information: Potentiometer for throttle valve body

• Vehicle Identification Number (VIN) from: 32000001, 35000001, 36000001, 3B000001, 4G000001
• Engine Code: Z 16 XE, X 16 XEL
• Block Separation:
• Pistikukatte kuju: ovaalne
• Materjal: Plastik
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Anduritüüp: NTC-andur
• Võtmekaugus: S19
• Keermemõõt: M12*1,5
• Manufacturer: NISSENS
• Name: NI 207019

Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Engine Code: Z 16 XE
• Vehicle Identification Number (VIN) to: 22999999, 25999999, 26999999, 28999999, 2B999999
• Vehicle Identification Number (VIN) from: 32000001, 35000001, 36000001, 3B000001, 4G000001
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Colour: grey
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Fitting Position: Rear, Front
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Voltage [V]: 12
• Socket colour: black
• Fabrication Number: EPDC-PL-001
• Manufacturer: NTY
• Name: NTY EPDC-PL-001

• Construction Year to: 03.2004
• Engine Code: Z 16 XE, Z16YNG
• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Number of pins: 2
• Housing Colour: black
• Name: DE TS10521
• Manufacturer: DELPHI

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• for OE number: 9947855
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: Z 16 XE
• Vehicle Identification Number (VIN) to: 22999999, 25999999, 26999999, 28999999, 2B999999
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 1.880.170, 1.880.190
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Vehicle Identification Number (VIN) to: 22999999, 25999999, 26999999, 28999999, 2B999999
• Engine Code: Z16XE
• Outer Diameter [mm]: 7.4
• Resistor [Ohm]: 2,080, 294
• Supplementary Article/Supplementary Info: with gasket/seal
• External Thread [mm]: 12
• Thread Pitch [mm]: 1.5
• Temperature range [°C]: 25, 80
• Mounting Type: Bolted
• Colour: blue
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black, white, light blue
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: Z 16 XE
• Vehicle Identification Number (VIN) to: 22999999, 25999999, 26999999, 28999999, 2B999999
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 7.8170, 7.8190
• Manufacturer: FACET

• Engine Code: X16XEL
• Number of pins: 2
• Thread Size: M12x1,5
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Voltage [V]: 12
• Weight [kg]: 0.03
• Operating Mode: Electric
• Number of pins: 3
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Cable Length [mm]: 585
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: Z 16 XE
• Number of connectors: 2
• Weight [kg]: 0.01
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 10456604
• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Engine Code: Z 16 XE
• Sensor Type: Passive sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Voltage [V]: 12
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Vehicle Identification Number (VIN) to: 26999999/28999999
• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• for OE number: 9114603
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 73
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-PL-021
• Manufacturer: NTY

• Length [mm]: 69
• Number of connectors: 2
• Lisainfo: Sensor, crankshaft pulse
• Additional information: Sensor, crankshaft pulse

• Engine Code: Z 16 XE
• Number of connectors: 2
• Weight [kg]: 0.01
• Name: SW 99 90 1840
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Mounting Type: Pressed
• for OE number: 9152245
• Manufacturer: MEAT & DORIA

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Height [mm]: 39
• Resistor [Ohm]: 2,300
• Number of connectors: 2
• Manufacturer: VERNET

• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
COMBO TOUR, 10.01-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
COMBO TOUR, 10.01-
(kvaliteediklass: PJ)"

• Connector Shape: oval
• Number of pins: 2
• Sensor Type: NTC Sensor
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: Z 16 XE
• Braking/Driving Dynamics: for vehicles without ABS
• Number of pins: 3
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Length [mm]: 57
• Number of connectors: 2
• Weight [kg]: 0.01
• Supplementary Article/Supplementary Info: without gasket/seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: Z 16 XE
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Connector Shape: oval
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: Z 16 XE
• Required quantity: 1
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pressure from [kPA]: 20
• Pressure to [kPA]: 10
• Number of pins: 3
• for OE number: 25085-00Q0B
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: Z16XE
• Required quantity: 1
• Manufacturer: BREMI

• Engine Code: Z 16 XE
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

Manufacturer: MAGNETI MARELLI

• Engine Code: Z16XE
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV105

• Engine Code: X 16 XEL
• Cable Length [mm]: 580
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Voltage [V]: 12
• Temperature range to [°C]: +250
• Resistor [Ohm]: 5,000
• Number of pins: 2
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009104011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Vehicle type: L91/Z1.6XE
• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• for OE number: 62 38 242
• Length [mm]: 34
• Length from [mm]: 34
• Width [mm]: 37
• Height [mm]: 47
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Hall Sensor
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Engine Code: Z 16 XE
• Vehicle Identification Number (VIN) to: 22999999, 25999999, 26999999, 28999999, 2B999999
• Block Separation:
• Manufacturer: BOSCH

• Operating voltage [V]: 12
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable, with seal ring
• Number of pins: 3
• Name: Andur,kiirus/p””rded
• Manufacturer: MEY