• Length [mm]: 300
• Fitting Position: Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-PL-008
• Manufacturer: NTY

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) to: 5G999999
• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 575
• Number of pins: 4
• Number of circuits: 4
• Thread Size: M 18x1,5
• Connector Shape: oval
• for OE number: 9193654
• Manufacturer: DELLO AUTOMEGA

• Engine Number to: 5G999999
• Number of circuits: 4
• Cable Length [mm]: 580
• Oxygen Sensor: Regulating Sensor
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Oxygen Sensor: Diagnostic Probe, Planar Sensor
• Fitting Position: after catalytic converter
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: Z 14 XEP
• Construction Year to: 03.2009
• Oxygen Sensor: Regulating Sensor, Heated
• Number of circuits: 4
• Length [mm]: 525
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Number from: 6G000001
• Oxygen Sensor: Diagnostic Probe
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV909
• Manufacturer: ESEN SKV

• Construction Year to: 06.2009
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 300
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor
• Vehicle Identification Number (VIN) to: 5G999999
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 06.2009
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Finger-type Sensor Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Diagnostic Probe
• Engine Code: Z 14 XEP
• Construction Year to: 03.2009
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 290
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV073

• Oxygen Sensor: Regulating Sensor
• Engine Code: Z 14 XEP
• Construction Year to: 03.2009
• Pinge [V]: 12
• Pikkus (mm): 741
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,11
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV072

• Fitting Position: after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 300
• Weight [kg]: 0.116
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe, Regulating Sensor
• Guarantee: 5 years guarantee
• Overall Length [mm]: 360
• Number of circuits: 4
• General Information: Sold in Hueco brand: printing and packaging
• Name: HU 135331
• Manufacturer: HITACHI

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 350
• Ülekandeliinide arv: 4
• Manufacturer: ERA

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• Block Separation:
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 220
• Weight [kg]: 0.067
• Manufacturer: FEBI

Vehicle Identification Number (VIN) to: W0L******5G999999, W0L******58******, W0L******52******, W0L******5H******, W0L******56******, W0L******55****** General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 300
• Weight [kg]: 0.116
• Name: SW 33 10 3203
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Resistor [Ohm]: 9
• Conductor Number: 4
• Length [mm]: 275
• Number of circuits: 4
• Cable Length [mm]: 275
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Engine Code: Z 14 XEP
• Oxygen Sensor: Regulating Sensor
• Ülekandeliinide arv: 4
• Piirangutega toode/piirangu info 2: ilma pistikuta
• Name: LAMBDA ANDUR
• Manufacturer: NTK

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• Block Separation:
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 220
• Weight [kg]: 0.067
• Name: SW 33 10 3205
• Manufacturer: SWAG

Vehicle Identification Number (VIN) to: W0L******5G999999, W0L******58******, W0L******52******, W0L******5H******, W0L******56******, W0L******55****** General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Sensor
• Construction Year to: 03.2009
• Pinge [V]: 12
• Pikkus (mm): 632
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,14
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV710
• Manufacturer: ESEN SKV

• Vehicle Identification Number (VIN) to: 5G999999
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year to: 06.2009
• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Conductor Number: 4
• Resistor [Ohm]: 9
• Length [mm]: 575
• Number of circuits: 4
• Cable Length [mm]: 575
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Regulating Sensor, Unheated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Cable Length [mm]: 520
• Quality: OE EQUIVALENT
• for OE number: 025198484
• Manufacturer: MEAT & DORIA

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 290
• valikuliselt:
• Ülekandeliinide arv: 4
• alternatiivne remondikomplekt: 570112
• Manufacturer: ERA

• Oxygen Sensor: Regulating Sensor
• Guarantee: 5 years guarantee
• Overall Length [mm]: 560
• Number of circuits: 4
• General Information: Sold in Hueco brand: printing and packaging
• Name: HU 135325
• Manufacturer: HITACHI

• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Keermemõõt: M18 x 1,5
• Pistiku värv: must
• Lambda andur: soojendatud, Keere eelmääritud
• Pistikukatte kuju: ovaalne
• Pistikkontaktide arv: 4
• OE-numbri jaoks: 08 55 402
• Pikkus (mm): 580
• Laius (mm): 32
• Kõrgus (mm): 22
• Kaablipikkus (mm): 300
• Ülekandeliinide arv: 4
• Versioon: Zr
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 06.2009
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 549
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 350
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Vehicle Identification Number (VIN) to: 5G999999
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 575
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 855429
• Quality: OE
• Weight [g]: 86
• Gross Weight [g]: 119
• Manufacturer: DENSO
• Name: DN DOX-2003
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
CORSA C (F08, F68),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
CORSA C (F08, F68),
(kvaliteediklass: Q)"

• Construction Year to: 06.2009
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 300
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Vehicle Identification Number (VIN) to: 5G999999
• Oxygen Sensor: Regulating Sensor
• Exhaust System: for pre-catalytic converter
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• OE-numbri jaoks: 08 55 355
• Pikkus (mm): 570
• Ülekandeliinide arv: 4
• Lambda andur: Keere eelmääritud
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M18x1.5
• Cable Length [mm]: 400
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 93186115
• Quality: OE
• Weight [g]: 83
• Gross Weight [g]: 116
• Manufacturer: DENSO
• Name: DN DOX-2050
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
CORSA D, 07.06-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
CORSA D, 07.06-
(kvaliteediklass: Q)"

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 570
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Engine Code: Z 14 XEP
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) to: 5G999999, 58, 52, 5H, 56, 55
• Oxygen Sensor: Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 570
• Number of pins: 4
• Manufacturer: PIERBURG