• Fitting Position: Front Axle both sides
• Name: Shock absorber's cover left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
DAEWOO NEXIA (KLETN)
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
DAEWOO NEXIA (KLETN)
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AB-PL-002
• Manufacturer: NTY

• Length [mm]: 205
• Inner Diameter [mm]: 80, 66
• Material: Rubber
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.13
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Fabrication Number: A-PL-004
• Manufacturer: NTY

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: AUTO-GH

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with lowered suspension

• Fitting Position: Rear Axle
• Suspension: for vehicles with heavy duty suspension
• Quantity per packing unit: 2
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Quantity per axle: 1
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: DELLO AUTOMEGA

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: ASHIKA-AMORTYZATORY

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: AUTO-GH

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with lowered suspension

• not for vehicle configuration line / variant: Sport
• Fitting Position: Rear Axle Left, Rear Axle Right
• Shock Absorber Type: Gas Pressure
• Replace in pairs only:
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Manufacturer: TOPRAN HANS PRIES

Shock Absorber Design: Telescopic Shock Absorber, Absorber does not carry a spring General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: OYODO

Suspension: for vehicles with standard suspension, for vehicles without lowered suspension

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: KAVO

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with lowered suspension

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Length 1 [mm]: 260
• Length 2 [mm]: 398
• Bore Diameter [mm]: 25
• Piston Rod Diameter [mm]: 12.4
• Weight [kg]: 1.4
• Packaging length [cm]: 45
• Packaging width [cm]: 5.5
• Packaging height [cm]: 5.3
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Fabrication Number: A-PL-003
• Manufacturer: NTY

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Fabrication Number: A-PL-002
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Suspension: for vehicles with bad road version
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Parameter: SE27/13X134
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Oil Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-363664, GH-363665, GH-691501
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with lowered suspension

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with lowered suspension

• Fitting Position: Front Axle, Front Axle Left
• Suspension: for vehicles with bad road version
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle, Front Axle Right
• Suspension: for vehicles with bad road version
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle, Front Axle Right
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• paired article number: 232-01-038
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle, Front Axle Left
• Suspension: for vehicles with bad road version
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• paired article number: 232-01-037
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Quantity per packing unit: 2
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 51
• Length 1 [mm]: 523
• Length 2 [mm]: 368
• Piston Rod Diameter [mm]: 22
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-068756
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
OPEL ASTRA II, 98-
(kvaliteediklass: Q)"

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• paired article number: MA-00328
• Article number of recommended accessories: SMA0131
• Manufacturer: ASHIKA-AMORTYZATORY

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Right
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles with bad road version
• Fitting Position: Front Axle Left
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• paired article number: MJ00328
• Article number of recommended accessories: SMJ0131
• Manufacturer: JAPKO

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: 22-053077
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-053060
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
OPEL ASTRA II 98-
(kvaliteediklass: Q)"

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: 22-053060
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-053077
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
OPEL ASTRA II 98-
(kvaliteediklass: Q)"

• Fitting Position: Front Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• paired article number: 334847
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KAYABA AMORTYZATORY

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with lowered suspension

• Fitting Position: Front Axle Left
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• paired article number: 334846
• Shock Absorber Mounting Type: Top pin
• Manufacturer: KAYABA AMORTYZATORY

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with bad road version, for vehicles with lowered suspension

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Bore Diameter [mm]: 32
• Piston Rod Diameter [mm]: 22
• paired article number: G16771
• Article number of recommended accessories: MK149, MK343, PK075
• Weight [kg]: 4.3
• Packaging length [cm]: 57.1
• Packaging width [cm]: 17
• Packaging height [cm]: 17
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Bore Diameter [mm]: 32
• Piston Rod Diameter [mm]: 22
• paired article number: G16770
• Article number of recommended accessories: MK149, MK343, PK075
• Weight [kg]: 4.3
• Packaging length [cm]: 57.1
• Packaging width [cm]: 17
• Packaging height [cm]: 17
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
OPEL ASTRA G
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
OPEL ASTRA G
(kvaliteediklass: Q)"

• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Lisainfo: 940035 NIS
• Additional information: 940035 NIS

Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control