• Number of circuits: 4
• Fitting Position: after catalytic converter
• Cable Length [mm]: 750
• Oxygen Sensor: Regulating Sensor
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Length [mm]: 190
• Fabrication Number: ESL-PL-004
• Manufacturer: NTY

Fitting Position: Front, before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Thread pre-greased

• Length [mm]: 770
• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-PL-005
• Manufacturer: NTY
• Name: NTY ESL-PL-005

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Diagnostic Probe
• Fabrication Number: ESL-SK-004
• Cable Length [mm]: 545
• Manufacturer: NTY

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Oxygen Sensor: Planar Sensor
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: after catalytic converter
• Number of pins: 4
• Oxygen Sensor: Diagnostic Probe
• Total Length [mm]: 315
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Engine Code: Z 18 XE
• Oxygen Sensor: Regulating Sensor, Heated
• Number of circuits: 4
• Length [mm]: 741
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Fitting Position: before catalytic converter
• Voltage [V]: 12
• Number of pins: 4
• Thread Size: M18x1,5
• Cable Length [mm]: 770
• Oxygen Sensor: Planar Sensor
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Oxygen Sensor: Diagnostic Probe, Planar Sensor
• Fitting Position: after catalytic converter
• Number of pins: 4
• Length [mm]: 315
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 09.2000
• Construction Year to: 01.2004
• Oxygen Sensor: Regulating Sensor, Finger-type Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Fitting Position: after catalytic converter
• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 300
• Weight [kg]: 0.085
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Conductor Number: 4
• Length [mm]: 275
• Resistor [Ohm]: 6
• Number of circuits: 4
• Cable Length [mm]: 275
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM089

• Oxygen Sensor: Diagnostic Probe
• Construction Year from: 09.2000
• Construction Year to: 01.2004
• Exhaust System: after catalytic converter
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Kaal (kg): 0,12
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV102

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 740
• Ülekandeliinide arv: 4
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe
• Length [mm]: 300
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Oxygen Sensor: Regulating Sensor
• Engine Code: Z 18 XE
• Pinge [V]: 12
• Pikkus (mm): 741
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,11
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Fitting Position: after catalytic converter
• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 300
• Weight [kg]: 0.085
• Name: SW 33 10 3132
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 01.2004
• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Cable Length [mm]: 650
• Quality: OE EQUIVALENT
• for OE number: 55566650
• Manufacturer: MEAT&DORIA

• Conductor Number: 4
• Resistor [Ohm]: 6
• Length [mm]: 750
• Number of circuits: 4
• Cable Length [mm]: 750
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM032

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Block Separation:
• Construction Year from: 09.2000, 03.2004
• Construction Year to: 03.2004
• Transmission Type: Manual Transmission
• Engine Code: Z 18 XE
• Cable Length [mm]: 770
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
OMEGA B (25/, 26/, 2
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
OMEGA B (25/, 26/, 2
(kvaliteediklass: PJ)"

• Resistor [Ohm]: 9
• Length [mm]: 420
• Number of circuits: 4
• Conductor Number: 4
• Cable Length [mm]: 420
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Engine Code: Z 18 XE
• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Pikkus (mm): 800
• Ülekandeliinide arv: 4
• Lambda andur: Keere eelmääritud
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Sensor
• Pinge [V]: 12
• Pikkus (mm): 770
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,14
• Takistus [oom]: 6
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV682
• Manufacturer: ESEN SKV

• Construction Year from: 09.2000
• Construction Year to: 01.2004
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Manufacturer: BOSCH
• Lisainfo: F00HL00351 BOSCH
• Additional information: F00HL00351 BOSCH

• Construction Year from: 09.2000
• Construction Year to: 01.2004
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Heated, Regulating Sensor
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 800
• Weight [kg]: 0.12
• Name: SW 33 10 3163
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 02.2004
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Manufacturer: VEMO GERMANY
• Additional information: V32-76-0007 VEMO
• Lisainfo: V32-76-0007 VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 290
• valikuliselt:
• Ülekandeliinide arv: 4
• alternatiivne remondikomplekt: 570112
• Manufacturer: ERA

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor
• Cable Length [mm]: 660
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA009166501

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 09.2000
• Construction Year to: 02.2004
• Engine Code: Z 18 XE
• Oxygen Sensor: Planar Sensor, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 300
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: rectangular
• Weight [kg]: 0.12
• Name: VA 368469
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Heated, Regulating Sensor
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 800
• Weight [kg]: 0.12
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Planar Sensor, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 800
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: rectangular
• Weight [kg]: 0.15
• Name: VA 368456
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Thread Size: M18x1.5
• Cable Length [mm]: 275
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 855389
• Quality: OE
• Weight [g]: 89
• Gross Weight [g]: 119
• Manufacturer: DENSO
• Quality class: Q
• Name: Lambda sensor

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Switching-type Oxygen Sensor

• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 740
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 855356
• Quality: OE
• Weight [g]: 114
• Gross Weight [g]: 144
• Manufacturer: DENSO

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor

• Construction Year from: 09.2000
• Construction Year to: 03.2004
• Transmission Type: Automatic Transmission
• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Engine Code: Z 18 XE
• Cable Length [mm]: 600
• Manufacturer: DELPHI
• Name: DE ES20282-12B1

• Oxygen Sensor: Regulating Sensor
• Transmission Type: Manual Transmission
• Length [mm]: 800
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Oxygen Sensor: Heated
• Number of pins: 4
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Oxygen Sensor: Diagnostic Probe, Regulating Sensor
• Construction Year to: 01.2004
• Fitting Position: before catalytic converter
• Length [mm]: 450
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Construction Year to: 02.2004
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 300
• Number of circuits: 4
• Manufacturer: VDO

• Construction Year from: 09.2000
• Construction Year to: 01.2004
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 500
• Available as universal article as well, see article no.: F00HL00351
• Manufacturer: BOSCH
• Name: BS F00HL00355

• Construction Year to: 02.2004
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 770
• Number of circuits: 4
• Manufacturer: VDO

• Construction Year from: 09.2000
• Construction Year to: 01.2004
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 775
• Manufacturer: BOSCH