• Fitting Position: Front Axle
• Quantity: 2
• Diameter [mm]: 47
• Manufacturer: DELLO AUTOMEGA

• Quantity per packing unit: 5
• Fitting Position: Front Axle both sides
• Diameter [mm]: 47
• Height [mm]: 33
• Material: Sheet Steel
• Name: KAITSEKAAS,RATTAKESE
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle both sides
• Diameter [mm]: 57
• Height [mm]: 33
• Material: Sheet Steel
• Name: KAITSEKAAS,RATTAKESE
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• Diameter [mm]: 47
• Height [mm]: 33
• Material: Steel
• Name: Kaitsekaas,rattakese
• Manufacturer: MAX

• Fitting Position: Front Axle both sides
• Diameter [mm]: 47
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle both sides
• Diameter [mm]: 57
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• for article number: KLP-PL-005
• Fabrication Number: KLP-PL-005-Z
• Manufacturer: NTY

• Fitting Position: Front Axle
• Rim Hole Number: 4
• Outer Diameter [mm]: 119
• Inner Diameter [mm]: 25.5
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 141-01-155

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with integrated wheel bearing
• Rim Hole Number: 4
• Braking/Driving Dynamics: for vehicles without ABS
• Lisainfo: Wheel hub with bearing, front, without ABS sensor
• Additional information: Wheel hub with bearing, front, without ABS sensor

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 136
• Inner Diameter [mm]: 56
• Assy./disassy. by qualified personnel required!:
• Name: AB 141-01-076
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Outer Diameter [mm]: 120
• Inner Diameter [mm]: 25
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 141-01-016

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Braking/Driving Dynamics: for vehicles without ABS
• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• Rim Hole Number: 4
• Outer Diameter [mm]: 136
• Fastening Type: Four-point attachment
• Bolt Hole Circle Ø [mm]: 100
• Manufacturer: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with nut, with studs General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Block Separation:
• Vehicle Identification Number (VIN) to: 12999999, 15999999, 16999999, 18999999
• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with wheel bearing
• Rim Hole Number: 4
• Braking/Driving Dynamics: for vehicles with ABS
• Lisainfo: Wheel hub, rear
• Additional information: Wheel hub, rear

Vehicle Identification Number (VIN) from: 22000001, 25000001, 26000001, 28000001, 4G000001, 1H000001

• Vehicle Identification Number (VIN) from: 22000001, 25000001, 26000001, 28000001, 4G000001
• Fitting Position: Rear Axle Left, Rear Axle Right
• Rim Hole Number: 5
• Braking/Driving Dynamics: for vehicles with ABS
• Lisainfo: Wheel hub, rear
• Additional information: Wheel hub, rear

Supplementary Article/Info 2: with integrated wheel bearing, with integrated ABS sensor

• Braking/Driving Dynamics: for vehicles with ABS
• Width [mm]: 70
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136, 56.5
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 3.35
• Manufacturer: FEBI

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated ABS sensor General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Rim Hole Number: 5

Supplementary Article/Info 2: with integrated wheel bearing, with integrated ABS sensor Lisainfo: Wheel hub with bearing, front, for wheels with 5 holes Additional information: Wheel hub with bearing, front, for wheels with 5 holes

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Rim Hole Number: 4

Supplementary Article/Info 2: with integrated wheel bearing, with integrated ABS sensor Lisainfo: Wheel hub with bearing, front, with ABS sensor, for wheels with 4 holes Additional information: Wheel hub with bearing, front, with ABS sensor, for wheels with 4 holes

• Braking/Driving Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• Rim Hole Number: 4
• Outer Diameter [mm]: 136
• Number of pins: 2
• Connector Shape: oval
• Fastening Type: Four-point attachment
• Bolt Hole Circle Ø [mm]: 100
• Manufacturer: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with nut, with integrated wheel speed sensor, with studs General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Braking/Driving Dynamics: for vehicles with ABS
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Rim Hole Number: 4
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Outer Diameter [mm]: 120
• Number of pins: 2
• Connector Shape: oval
• Number of flange connections: 3
• Bolt Hole Circle Ø [mm]: 100
• Manufacturer: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with nut, with bolts/screws, with integrated wheel speed sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with integrated ABS sensor, with wheel bearing
• Rim Hole Number: 4
• Manufacturer: JP GROUP

Lisainfo: Wheel hub with bearing, front, with ABS sensor, for wheels with 4 holes, without mounting kit Additional information: Wheel hub with bearing, front, with ABS sensor, for wheels with 4 holes, without mounting kit

• Braking/Driving Dynamics: for vehicles with ABS
• Width [mm]: 70
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136, 56.5
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 3.35
• Name: SW 40 90 2843
• Manufacturer: SWAG

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated ABS sensor General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with integrated wheel bearing
• Inner Diameter [mm]: 29.5
• Outer Diameter [mm]: 120
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 3
• Rim Hole Number: 4
• Number of Teeth: 33
• Bearing Type: Ball Bearing
• Name: RATTARUMM
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Braking/Driving Dynamics: for vehicles without ABS
• Outer Diameter 1 [mm]: 136
• Height 1 [mm]: 144
• Rim Hole Number: 4
• Thread Size: M12 x 1.5
• Bolt Hole Circle Ø [mm]: 100
• Outer Diameter 2 [mm]: 60
• Number of flange connections: 4
• Weight [kg]: 3.38
• Manufacturer: ABS

• Production number from: 1H000001
• Fitting Position: Rear Axle
• Number of Teeth, ABS ring: 29
• Supplementary Article/Info 2: with ABS sensor ring
• Manufacturer: FEBEST

• Rim Hole Number: 5
• Braking/Driving Dynamics: for vehicles with ABS
• Width [mm]: 115
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 105
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 3.65
• Manufacturer: FEBI BILSTEIN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated ABS sensor General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Rim Hole Number: 4
• Braking/Driving Dynamics: for vehicles with ABS
• Width [mm]: 116, 87
• Inner Diameter [mm]: 26, 56.4
• Outer Diameter [mm]: 120
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 2.5
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated ABS sensor General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 22000001, 25000001, 26000001, 28000001, 4G000001
• Quantity Unit: Set
• Fitting Position: Rear Axle
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Braking/Driving Dynamics: for vehicles without ABS
• Width [mm]: 107.5
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 3.152
• Supplementary Article/Supplementary Info: with nuts
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Block Separation:
• Vehicle Identification Number (VIN) to: 12999999, 15999999, 16999999, 18999999
• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 56
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 100
• Number of Teeth, ABS ring: 48
• Rim Hole Number: 4
• Fastening Type: Four-point attachment
• Bearing Type: Ball Bearing
• Name: RATTARUMM
• Manufacturer: MEY

Vehicle Identification Number (VIN) from: 22000001, 25000001, 26000001, 28000001, 4G000001, 1H000001 Supplementary Article/Info 2: with integrated ABS sensor, with integrated wheel bearing General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Rim Hole Number: 5
• Braking/Driving Dynamics: for vehicles with ABS
• Width [mm]: 115
• Inner Diameter [mm]: 26
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 105
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 3.65
• Name: SW 40 92 4164
• Manufacturer: SWAG

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated ABS sensor General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 56.4
• Outer Diameter [mm]: 120
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 3
• Rim Hole Number: 4
• Bearing Type: Ball Bearing
• Name: RATTARUMM
• Manufacturer: MEY
• Lisainfo: 6146520003
• Additional information: 6146520003

Supplementary Article/Info 2: with integrated wheel bearing, with integrated ABS sensor General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Rim Hole Number: 4
• Braking/Driving Dynamics: for vehicles with ABS
• Width [mm]: 116, 87
• Inner Diameter [mm]: 26, 56.4
• Outer Diameter [mm]: 120
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 4
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 2.5
• Name: SW 99 91 4615
• Manufacturer: SWAG

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated ABS sensor General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Braking/Driving Dynamics: for vehicles without ABS
• Inner Diameter 1 [mm]: 25.5
• Outer Diameter 1 [mm]: 119
• Height 1 [mm]: 84
• Rim Hole Number: 4
• Thread Size: M12 x 1.4
• Bolt Hole Circle Ø [mm]: 100
• Outer Diameter 2 [mm]: 85
• Number of flange connections: 3
• Weight [kg]: 2.85
• Manufacturer: ABS

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material, with accessories
• Inner Diameter [mm]: 65
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 110
• Number of Holes: 3
• Rim Hole Number: 5
• Bearing Type: Ball Bearing
• Name: RATTARUMM
• Manufacturer: MEY

Supplementary Article/Info 2: with integrated wheel bearing, with integrated ABS sensor General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Vehicle Identification Number (VIN) from: 22000001, 25000001, 26000001, 28000001, 4G000001
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 65
• Outer Diameter [mm]: 139
• Bolt Hole Circle Ø [mm]: 110
• Number of Teeth, ABS ring: 29
• Rim Hole Number: 5
• Fastening Type: Four-point attachment
• Bearing Type: Ball Bearing
• Name: RATTARUMM
• Manufacturer: MEY

Supplementary Article/Info 2: with integrated wheel bearing, with integrated ABS sensor

• Fitting Position: Front Axle Left, Front Axle Right
• Braking/Driving Dynamics: for vehicles with ABS
• Inner Diameter 1 [mm]: 25.5
• Outer Diameter 1 [mm]: 119
• Height 1 [mm]: 85
• Rim Hole Number: 4
• Thread Size: M12 x 1,5
• Bolt Hole Circle Ø [mm]: 100
• Number of flange connections: 3
• Weight [kg]: 2.7
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

Supplementary Article/Info 2: with integrated wheel bearing, with integrated ABS sensor