Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: X 17 DTL
- Thread Size: M14x1.5
- Spanner Size: 24
- Number of pins: 1
- Manufacturer: KAVO PARTS
-
Thread Size: M 14x1,
5 - Housing Colour: black
- Manufacturer: FAE
- Additional information: 12430 FAE
- Lisainfo: 12430 FAE
- Number of pins: 1
- Colour: black
- Pressure from [bar]: 0.3
-
Thread Size: M14X1,
5 - Spanner Size: 24
- for OE number: 9544610
- Manufacturer: MEAT&DORIA
- Pressure [bar]: 0.3
-
Thread Size: M 14 x 1,
5 - for OE number: 1535416
- Manufacturer: MEAT&DORIA
Manufacturer: FAST
- Engine Code: X 17 DTL
-
Thread Size: M14x1,
5 -
Control Range [bar]: 0,
3 - 0, 55 - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: X 17 DTL
- Pressure [bar]: 0.5
-
Thread Size: M14x1,
5 - Spanner Size: 24
- Name: OLISURVELLITUS
- Manufacturer: EPS
- Engine Code: X 17 DTL
- Pressure [bar]: 0.5
-
Thread Size: M14x1,
5 - Spanner Size: 24
- Manufacturer: FACET
- Pressure [bar]: 0.4
-
Thread Size: M14 x 1,
5 - Number of pins: 1
- Technical Information Number: circuit N.C.
- Manufacturer: ERA
- Pressure from [bar]: 0.2
- Pressure to [bar]: 0.5
-
Thread Size: M14x1,
50 - Spanner Size: 21
- Name: OLISURVELLITUS
- Manufacturer: MAG
-
Thread Size: M14 x 1,
5 - Spanner Size: 24
- Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Pressure [bar]: 0.42
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: X 17 DTL
- Vehicle Equipment: for vehicles with air conditioning
- Voltage [V]: 12
- Combi Switch Function: Normally Closed Contact
- Current Strength [A]: 0.25
-
Thread Size: M14x1,
5 - Spanner Size: 24
- Pressure from [bar]: 0.35
- Pressure to [bar]: 0.55
- Number of pins: 1
- Corresponds to the original part in colour: black
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6ZL003259491
- Number of pins: 2
- Socket colour: bright blue
- Connector Shape: oval
-
Thread Size: M 12x1,
5 - Spanner Size: 19 mm
- for OE number: 46469865
- Manufacturer: MEAT&DORIA
- Engine Code: X 17 DTL
- Manufacturer Restriction: BOSCH
- Sensor Type: NTC Sensor
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Supplementary Article/Info 2: with seal ring
- Colour: grey
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Engine Code: X 17 DTL
- Manufacturer Restriction: BOSCH
- Housing Colour: black
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
Corresponds to the original part in colour: white,
green, black -
for article number: 1.880.170,
1.880.190 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Outer Diameter [mm]: 7.4
-
Resistor [Ohm]: 2,
080, 294 -
Supplementary Article/Supplementary Info: with gasket/
seal - External Thread [mm]: 12
- Thread Pitch [mm]: 1.5
-
Temperature range [°C]: 25,
80 - Mounting Type: Bolted
- Colour: blue
- Spanner Size: 19
- Sensor Type: NTC Sensor
- Number of pins: 2
-
Corresponds to the original part in colour: black,
white, light blue - Assy./disassy. by qualified personnel required!:
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: X 17 DTL
- Manufacturer Restriction: BOSCH
- Housing Colour: black
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
Corresponds to the original part in colour: white,
green, black -
for article number: 7.8170,
7.8190 - Manufacturer: FACET
- Number of pins: 2
-
Thread Size: M12x1,
5 - Supplementary Article/Info 2: with seal ring
- Housing Colour: black
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Chemical Properties: Oil resistant
- Number of pins: 1
- Cable Length [mm]: 80
- Cable Cross Section [mm²]: 1
-
Contact surface: Tin-
plated -
Supplementary Article/Info 2: with copper casing,
with protection hose - Supplementary Article/Supplementary Info: with cable tie
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +125
- SVHC: No SVHC present!
-
Name: henduskaabel,
olisurvelliti - Manufacturer: HBE
Manufacturer Restriction: Opel, Fiat, Peugeot, Alfa Romeo, Lancia, Suzuki, Ford, Citroen
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks