• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: N1038530, N5000001, NV354658
• Brake System: Teves
• Height 1 [mm]: 58.1
• Height 2 [mm]: 48.2
• Width 1 [mm]: 140.1
• Width 2 [mm]: 141.3
• Thickness [mm]: 16.8
• Wear Warning Contact: prepared for wear warning indicator
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, front, 16.5 mm
• Additional information: Brake pad set, front, 16.5 mm

• Quantity per packing unit: 75
• Filter type: In-Line Filter
• Height [mm]: 140
• Outer Diameter [mm]: 55
• Outlet Ø [mm]: 8
• Inlet Ø [mm]: 8
• Manufacturer: SCT MANNOL

• OE-numbri jaoks: 6N0 201 511 A
• Filtritüüp: Ühendusfilter
• Manufacturer: TRUCKTEC

• Filtritüüp: Ühendusfilter
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• OE-numbri jaoks: 119113204500
• Kõrgus (mm): 140
• Kütuseliik: Bensiin
• Välisläbimõõt [mm]: 56
• Manufacturer: KAMOKA

• Construction Year to: 07.1992
• Engine Code: 16 SV
• Filtritüüp: Ühendusfilter
• Kõrgus (mm): 131
• Välisläbimõõt [mm]: 62
• Välisläbimõõt 1 [mm]: 56
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• Kaal (kg): 0,1
• Manufacturer: VALEO
• Name: VA 587003

• Engine Code: 16 SV
• Filtritüüp: Ühendusfilter
• Välisläbimõõt 1 [mm]: 25
• Väljalase-Ø (mm): 8
• Kõrgus (mm): 80
• Manufacturer: PIERBURG

• Filter type: In-Line Filter
• Height [mm]: 140
• Outer Diameter [mm]: 59
• Inlet Ø [mm]: 9.3
• Outlet Ø [mm]: 8
• Packing Type: Carton
• Packaging length [cm]: 6.4
• Packaging width [cm]: 6.4
• Packaging height [cm]: 17.8
• Name: CH CFF100201
• Manufacturer: CHAMPION

• Engine Number to: 02J22349
• Number of Teeth: 104
• Length [mm]: 991
• Width [mm]: 17
• Tooth Pitch [mm]: 9.525
• Manufacturer: BOSCH

• Filtritüüp: Filtrer
• Läbimõõt [mm]: 60
• Siseläbimõõt 1 [mm]: 8
• Siseläbimõõt 2 (mm): 8
• Kõrgus (mm): 135
• OE-numbri jaoks: 7606404
• Manufacturer: MEAT & DORIA

• Filtritüüp: Keeratav filter
• Kõrgus (mm): 140
• Välisläbimõõt [mm]: 56
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Filtritüüp: Ühendusfilter
• Kõrgus (mm): 138
• Välisläbimõõt [mm]: 60
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• SVHC: SVHS aineid ei esine
• Manufacturer: FILTRON

• Filter type: In-Line Filter
• Height [mm]: 138
• Outer Diameter 1 [mm]: 55
• Outer Diameter 2 [mm]: 59
• Inner Diameter 1 [mm]: 8
• Inner Diameter 2 [mm]: 8
• Manufacturer: DENCKERMANN FILTRY

• Filtritüüp: Filtrer
• Läbimõõt [mm]: 60
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• Kõrgus (mm): 160
• OE-numbri jaoks: 156789
• Manufacturer: MEAT & DORIA

• Filtritüüp: Ühendusfilter
• Kõrgus (mm): 138
• Välisläbimõõt [mm]: 60
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• Manufacturer: PROFIPOWER

• Läbimõõt [mm]: 55
• Materjal: Plastik
• Filtritüüp: Ühendusfilter
• Kõrgus (mm): 139
• Manufacturer: DELPHI
• Name: DE EFP214

• Filter type: Spin-on Filter
• Height [mm]: 139
• Inner Diameter [mm]: 8
• Outer Diameter [mm]: 55
• Quality class: PJ
• Name: Fuel filter

• Filtritüüp: Ühendusfilter
• Välisläbimõõt 1 [mm]: 56
• Väljalase-Ø (mm): 8
• Keermemõõt: 8 mm
• Kõrgus (mm): 138
• Korpuse materjal: Alumiinium
• Manufacturer: KOLBENSCHMIDT

• Width [mm]: 17
• Number of Teeth: 104
• Belts: with rounded tooth profile
• Weight [kg]: 0.09
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Number from: 02J22350
• Number of Teeth: 111
• Length [mm]: 1,057
• Width [mm]: 17
• Belts: with rounded tooth profile
• Manufacturer: KAMOKA

• Filtritüüp: Ühendusfilter
• Kõrgus (mm): 139
• Välisläbimõõt [mm]: 55
• Läbimõõt 3 (mm): 8
• Läbimõõt 4 (mm): 8
• Manufacturer: PURFLUX

• Vehicle Identification Number (VIN) to: M5999999/N1038529
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Thickness [mm]: 15.5
• Width [mm]: 100
• Height [mm]: 59
• Brake System: GM DELCO
• Manufacturer: LPR

• Driven Units: Camshaft
• Engine Number to: 02J22349, 19307805
• Number of Teeth: 104
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.137
• Width [mm]: 17
• Tooth Pitch [mm]: 9.525
• Manufacturer: CONTITECH

• Filter type: In-Line Filter
• Outer Diameter [mm]: 54.5
• Height [mm]: 139.5
• Manufacturer: HENGST FILTER

• Filtritüüp: Ühendusfilter
• Läbimõõt [mm]: 55
• Kõrgus (mm): 140
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• Netokaal [g]: 101
• pakendi kõrgus [cm]: 14,6
• pakendi pikkus [cm]: 5,6
• pakendi laius [cm]: 5,6
• Name: KN KL14
• Manufacturer: KNECHT

• Driven Units: Camshaft
• Engine Number to: 19307805, 02J22349
• Article number of the recommended special tool: GATV501A, STT-1
• Tensile Cord Material: Fiberglass
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Number of Teeth: 104
• Width [mm]: 17
• Tooth Pitch [mm]: 9.525
• Length [mm]: 991
• Manufacturer: GATES

• Driven Units: Camshaft
• Vehicle Equipment Line/Variant: HSN
• Number of Teeth: 111
• Width [mm]: 17
• Manufacturer: DAYCO
• Name: DA 94650

• Engine Number from: 02 J22350
• Number of Teeth: 111
• Length [mm]: 1,057
• Width [mm]: 17
• Tooth Pitch [mm]: 9.525
• Manufacturer: BOSCH

• Engine Number from: 02J22350
• Width [mm]: 17
• Number of Teeth: 111
• Belts: with rounded tooth profile
• Weight [kg]: 0.09
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: In-Line Filter
• Diameter [mm]: 55
• Height [mm]: 140
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Net Weight [g]: 101
• Packaging height [cm]: 14.6
• Packaging width [cm]: 5.6
• Packaging length [cm]: 5.6
• Manufacturer: MAHLE KNECHT

• Driven Units: Camshaft
• Engine Number from: 19307806, 02J22350
• Article number of the recommended special tool: GATV501A
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Colour: black
• Number of Teeth: 111
• Width [mm]: 17
• Tooth Pitch [mm]: 9.525
• Length [mm]: 1,057
• Manufacturer: GATES

• EU Product Safety Regulation (GPSR): IEC 60417-6183 mechanical expertise required
• Filter type: In-Line Filter
• Height [mm]: 138
• Outer Diameter [mm]: 55
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: MANN

• Driven Units: Camshaft
• Engine Number from: 02J22350, 19307806
• Number of Teeth: 111
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.12
• Width [mm]: 17
• Tooth Pitch [mm]: 9.525
• Manufacturer: CONTITECH
• Name: CT 874

• Fitting Position: Front Axle
• Construction Year to: 10.1991
• Quantity per packing unit: 4
• FMSI Code: D1436-8554
• Test Mark: E4 90R-01587/1331
• Brake System: Delco
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 20939
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 100
• Width 2 [mm]: 99.9
• Height 1 [mm]: 59
• Height 2 [mm]: 59
• Thickness 1 [mm]: 15
• Thickness 2 [mm]: 15
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP415

• Vehicle Identification Number (VIN) to: N1038529
• Fitting Position: Front Axle
• Brake System: AC DELCO
• Width [mm]: 100
• Height [mm]: 59.5
• Thickness [mm]: 15
• Wear Warning Contact: without integrated wear sensor
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• WVA Number: 20867
• Weight [kg]: 1.05
• Manufacturer: VALEO

• Outer Diameter [mm]: 59
• Inner Diameter [mm]: 19
• Manufacturer: JP GROUP
• Lisainfo: Tension pulley for timing belt
• Additional information: Tension pulley for timing belt

• Fitting Position: Front Axle
• Width 1 [mm]: 100
• Height 1 [mm]: 59
• Thickness 1 [mm]: 15.8
• Brake System: DELCO
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.25
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: N5000001
• Brake System: ATE
• Width 1 [mm]: 141.2
• Width 2 [mm]: 140
• Thickness [mm]: 16.5
• Test Mark: ECE R90
• Height 1 [mm]: 48.4
• Height 2 [mm]: 58.3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Identification Number (VIN) from: N1038530/N5000000
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Article number of recommended accessories: KS0082
• Width 2 [mm]: 140.1
• Width 1 [mm]: 141.3
• Height 2 [mm]: 58.1
• Thickness [mm]: 16.5
• Brake System: ATE
• Height 1 [mm]: 48.3
• Manufacturer: LPR

• Vehicle Identification Number (VIN) from: N1038530
• Fitting Position: Front Axle
• Thickness [mm]: 16.5
• Brake System: ATE
• Width 1 [mm]: 141.2
• Width 2 [mm]: 140
• Height 1 [mm]: 48.4
• Height 2 [mm]: 58.3
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact

• Vehicle Identification Number (VIN) from: P1000001
• Fitting Position: Rear Axle
• Diameter [mm]: 200
• Width [mm]: 46
• Supplementary Article/Supplementary Info: with lever
• Brake System: LUCAS
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Block Separation:
• Length [mm]: 100
• Width [mm]: 59
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 15.5
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.11
• Observe service information:
• Manufacturer: FEBI HAMULCE

Vehicle Identification Number (VIN) to: *********M5999999, *********N1038529, *********NV****** General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Width [mm]: 46
• Supplementary Article/Supplementary Info: with lever
• Brake System: Lucas / TRW
• Inner brake drum diameter [mm]: 200
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Vehicle Identification Number (VIN) from: N1038530, N5000001
• Fitting Position: Front Axle
• Block Separation:
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Jämedus/Tugevus (mm): 16,5
• Kõrgus 1 (mm): 48,4
• Kõrgus 2 (mm): 58,3
• Pidurisüsteem: ATE
• Laius 1 (mm): 141,2
• Laius 2 (mm): 140
• Manufacturer: JPN

• Fitting Position: Front Axle
• Thickness [mm]: 16
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Width 1 [mm]: 141
• Width 2 [mm]: 140
• Height 1 [mm]: 48
• Height 2 [mm]: 58
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Engine Number from: 02J22350
• Width [mm]: 19
• Outer Diameter [mm]: 59
• Height [mm]: 31
• Manufacturer: OPTIMAL

• Vehicle Identification Number (VIN) to: M5999999, N1038529, NV354657
• Quantity per packing unit: 4
• Installatsiooni pool: Esisild
• Jämedus/Tugevus (mm): 15,5
• Laius (mm): 100
• Kõrgus (mm): 59
• Pidurisüsteem: DELCO
• Kaal (kg): 1,14
• Manufacturer: TOMEX

• Construction Year from: 08.1992
• Vehicle Identification Number (VIN) from: P1000001/P5000001
• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Inner brake drum diameter [mm]: 200
• Width [mm]: 46
• Manufacturer: LPR

• Block Separation:
• Length [mm]: 100
• Width [mm]: 59
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 15.5
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.11
• Name: SW 40 91 6203
• Manufacturer: SWAG

Vehicle Identification Number (VIN) to: *********M5999999, *********N1038529, *********NV****** General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 07.1992
• Vehicle Identification Number (VIN) from: N1038530
• Fitting Position: Front Axle
• Brake System: TEVES
• Width [mm]: 141
• Height [mm]: 48.2
• Thickness [mm]: 16
• Width 2 [mm]: 141
• Height 2 [mm]: 48.2
• Thickness 2 [mm]: 16
• Wear Warning Contact: without integrated wear sensor
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• WVA Number: 21353
• Weight [kg]: 1.26
• Manufacturer: VALEO
• Name: VA 301356

• Construction Year to: 07.1991
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: GENERAL MOTORS
• Width [mm]: 100
• Height [mm]: 59
• Thickness [mm]: 15
• Wear Warning Contact: prepared for wear warning indicator
• WVA Number: 20939
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: P1/5/7 000001
• Quantity per packing unit: 4
• Width [mm]: 46
• Brake System: TRW
• Supplementary Article/Info 2: with handbrake lever
• Inner brake drum diameter [mm]: 200
• Manufacturer: BREMBO
• Name: BR S 59 513

• Fitting Position: Front Axle
• Construction Year to: 07.1991
• Brake Disc Type: solid
• Manufacturer Restriction: DELCO
• Wear Warning Contact: not prepared for wear warning indicator
• WVA Number: 20939
• Test Mark: E1 90R-01813/051
• Width [mm]: 99.8
• Thickness [mm]: 15.4
• Height [mm]: 58.9
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Vehicle Identification Number (VIN) to: N5999999
• Fitting Position: Rear Axle
• Diameter [mm]: 200
• Width [mm]: 46
• Supplementary Article/Supplementary Info: with lever
• Brake System: LUCAS
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Construction Year from: 01.1991
• Brake System: Ate
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 48.6
• Height 2 [mm]: 58.4
• Wear Warning Contact: prepared for wear warning indicator
• Vibration: with vibration damper
• Width 1 [mm]: 141.5
• Width 2 [mm]: 140.2
• Thickness 1 [mm]: 16.5
• Thickness 2 [mm]: 17
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: P1000001
• Supplementary Article/Supplementary Info: with lever
• Width [mm]: 46
• Inner brake drum diameter [mm]: 200
• Test Mark: ECE R90
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Construction Year to: 12.1991
• Brake System: General Motors
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 59.2
• Wear Warning Contact: prepared for wear warning indicator
• Vibration: with vibration damper
• Width 1 [mm]: 100
• Thickness 1 [mm]: 15.5
• Manufacturer: METELLI UKL.HAMULCOWY

• Vehicle Identification Number (VIN) to: N1038529
• Fitting Position: Front Axle
• Brake System: TEVES
• Width [mm]: 156
• Height [mm]: 52.4
• Thickness [mm]: 17.5
• Wear Warning Contact: without integrated wear sensor
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• WVA Number: 21201
• Weight [kg]: 1.2
• Manufacturer: VALEO
• Name: VA 301184

• Brake System: Lucas
• Construction Year to: 06.1992
• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Width [mm]: 45
• Inner brake drum diameter [mm]: 200
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: NV354657, M5999999, N1038529
• Quantity per packing unit: 4
• Width [mm]: 100
• Thickness [mm]: 15
• Height [mm]: 59
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Delco Moraine
• Supplementary Article/Info 2: with anti-squeak plate
• WVA Number: 20939
• Manufacturer: BREMBO
• Name: BR P 59 005

• Construction Year from: 01.1991
• Fitting Position: Front Axle
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Kõrgus 1 (mm): 58,3
• Kõrgus 2 (mm): 48,3
• Pidurisüsteem: ATE
• Laius 1 (mm): 140,2
• Laius 2 (mm): 141,4
• Jämedus/Tugevus 1 (mm): 16,5
• Jämedus/Tugevus 2 (mm): 16,5
• Manufacturer: PROFIPOWER

• Vehicle Identification Number (VIN) from: *********N2000001
• Fitting Position: Front Axle
• Length [mm]: 140.2, 141.4
• Width [mm]: 58.1, 48.2
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Thickness 1 [mm]: 16
• Weight [kg]: 1.23
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: NV354657, N1038529, M5999999
• Width [mm]: 100.1
• Height [mm]: 59.1
• Thickness [mm]: 15.4
• Wear Warning Contact: not prepared for wear warning indicator
• WVA Number: 20939
• Brake System: Delco Moraine
• Article number of recommended accessories: 82012800
• Packaging length [cm]: 12.5
• Packaging width [cm]: 8.1
• Packaging height [cm]: 8
• Weight [kg]: 1.22
• Manufacturer: TEXTAR

• Fitting Position: Front Axle
• Construction Year from: 10.1991
• Quantity per packing unit: 4
• FMSI Code: D1701-8925 D1139-825
• Test Mark: E1 90R-01881/450
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 20547, 21353
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 140.3
• Width 2 [mm]: 141.3
• Height 1 [mm]: 58.1
• Height 2 [mm]: 48.2
• Thickness 1 [mm]: 16.1
• Thickness 2 [mm]: 16.1
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Engine Number from: 02J22350
• Width [mm]: 19
• Outer Diameter [mm]: 59
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Tensioner Pulley Actuation: Automatic
• Supplementary Article/Info 2: with screw
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Construction Year from: 08.1991
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Height [mm]: 58.1
• Width [mm]: 140.2
• Thickness [mm]: 17.3
• Manufacturer: AUTO-GH

• Vehicle Identification Number (VIN) from: P1000001
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 200
• Width [mm]: 46
• Supplementary Article/Supplementary Info: with lever
• Manufacturer: JP GROUP
• Lisainfo: Brake shoe set, 200x45 mm
• Additional information: Brake shoe set, 200x45 mm

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: N1038530, N5000001, NV354658
• Quantity per packing unit: 4
• Number of pads: 4
• Thickness [mm]: 16.5
• Height 1 [mm]: 48.5
• Height 2 [mm]: 56.6
• Wear Warning Contact: prepared for wear warning indicator
• Brake Lining: With bevelled edges
• Brake System: ATE
• Length 1 [mm]: 140
• Length 2 [mm]: 141.4
• WVA Number: 20547, 21353
• Manufacturer: SKF KLOCKI HAM

• Vehicle Identification Number (VIN) from: *********N2000001
• Fitting Position: Front Axle
• Length [mm]: 140, 141
• Width [mm]: 58, 48
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Thickness 1 [mm]: 16
• Weight [kg]: 1.23
• Observe service information:
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 09.1991
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 140
• Length 1 [mm]: 141.5
• Height [mm]: 58.8
• Height 1 [mm]: 48
• Thickness [mm]: 16.4
• WVA Number: 20547, 21353
• Test Mark: ECE R90 APPROVED
• for OE number: 11046948372
• Manufacturer: JAPKO

• Construction Year from: 09.1991
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 140
• Length 1 [mm]: 141.5
• Height [mm]: 58.8
• Height 1 [mm]: 48
• Thickness [mm]: 16.4
• WVA Number: 20547, 21353
• Test Mark: ECE R90 APPROVED
• for OE number: 11046948372
• Manufacturer: ASHIKA-KLOCKI

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: N1038529, M5999999
• Supplementary Article/Supplementary Info: with spring
• Supplementary Article/Info 2: with anti-squeak plate
• Product must be determined on the vehicle or the motor:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 20939
• Number of springs: 4
• Thickness [mm]: 15.6
• Width [mm]: 100
• Height [mm]: 59.5
• Manufacturer Restriction: GM System
• Manufacturer: BOSCH HAMULCE

Article number of recommended accessories: 1987474210, 1987474580, 1987474604, 1987474906, 1987474909, 1987474179, 1987474928, 1987474929, 1987474030, 1987474126, 1987474173, 1987474923

• Vehicle Identification Number (VIN) from: *********N2000001
• Fitting Position: Front Axle
• Length [mm]: 140.2, 141.4
• Width [mm]: 58.1, 48.2
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Thickness 1 [mm]: 16
• Weight [kg]: 1.23
• Name: SW 40 91 6055
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: N1038529
• Fitting Position: Front Axle
• Width [mm]: 100
• Height [mm]: 59
• Thickness [mm]: 15.8
• Brake System: Delco
• Test Mark: E1 90 R-01568/448, E1 90R-01973/636
• MAPP code available:
• Observe dimensions:
• Manufacturer: ATE
• Quality class: Q
• Name: Brake pads

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact Article number of recommended accessories: 13.0460-0127.2, 13.0460-0205.2, 24.8190-0701.2, 24.8190-0702.2, 24.8190-0704.2, 24.8190-0712.2

• Construction Year from: 08.1992
• Installatsiooni pool: Tagasild
• Laius (mm): 46
• Piduritrumli läbimõõt seespool [mm]: 200
• Kaal (kg): 1,7
• Manufacturer: TOMEX

• Vehicle Identification Number (VIN) to: M5999999
• Fitting Position: Front Axle
• Width [mm]: 100
• Height [mm]: 59
• Thickness [mm]: 15.4
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: Delco
• Supplementary Article/Info 2: with anti-squeak plate
• Manufacturer: MEYLE

• Fitting Position: Front Axle
• Construction Year to: 07.1991
• Quantity per packing unit: 4
• Manufacturer Restriction: DELCO
• Wear Warning Contact: prepared for wear warning indicator
• Test Mark: E1 90R 01024/362
• Height [mm]: 59
• Width [mm]: 100
• Thickness [mm]: 15.5
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: N1038530, N5000001, NV354658
• Quantity per packing unit: 4
• Jämedus/Tugevus (mm): 17,3
• Laius (mm): 140,2
• Kõrgus (mm): 58,1
• Pidurisüsteem: ATE
• Kaal (kg): 1,09
• Manufacturer: TOMEX

• Fitting Position: Front Axle
• Construction Year from: 08.1991
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Test Mark: E1 90R 01024/067
• Height [mm]: 58.1
• Width [mm]: 140.2
• Thickness [mm]: 17.3
• Manufacturer: TRW
• Quality class: Q
• Name: Brake pads

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Construction Year from: 01.1991
• Läbimõõt [mm]: 200
• Laius (mm): 46
• Pidurisüsteem: LUCAS
• Manufacturer: PROFIPOWER