Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Transmission Type: Manual Transmission
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 34
- Outer Diameter [mm]: 64
- Height [mm]: 37
- Manufacturer: JP GROUP
Lisainfo: Wheel bearing kit, for one front wheel 64x37x34 mm v+laius+sisemõõt Additional information: Wheel bearing kit, for one front wheel 64x37x34 mm v+laius+sisemõõt
- Fitting Position: Rear Axle
- Width [mm]: 8.5
- Inner Diameter [mm]: 40
-
Outer Diameter [mm]: 52,
62 -
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.098
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 14.7
- Inner Diameter [mm]: 29
- Outer Diameter [mm]: 50.3
- Fitting Position: Front Axle
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Width [mm]: 15
- Inner Diameter [mm]: 17
- Outer Diameter [mm]: 40
- Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 17.5
- Outer Diameter 1 [mm]: 50
- Outer Diameter 2 [mm]: 40
- Height 1 [mm]: 14.75
- Height 2 [mm]: 15
- Manufacturer: JP GROUP
-
Lisainfo: Wheel bearing kit,
for one front or rear wheel -
Additional information: Wheel bearing kit,
for one front or rear wheel
-
Fitting Position: Rear Axle,
Rear Axle Left, Rear Axle Right -
Fabrication Number: KLT-
DW- 020 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Vehicle configuration line / variant: FRRE LR+RE LR+RE
- Inner Diameter [mm]: 29
- Inner Diameter 2 [mm]: 17
- Width 1 [mm]: 14
- Width 2 [mm]: 39
- Number of mounting bores: 1
- Name: DA KWD1068
- Manufacturer: DAYCO
- Fitting Position: Rear Axle
- Construction Year to: 12.1993
- Width [mm]: 14.6
- Inner Diameter [mm]: 17.5
- Outer Diameter [mm]: 39.9
- Width 1 [mm]: 13.8
- Width 2 [mm]: 14.2
- Outer Diameter 1 [mm]: 50.3
- Inner Diameter 1 [mm]: 29
- Manufacturer: OPTIMAL
- Fitting Position: Rear Axle
- new version:
- Bearing Type: Tapered Roller Bearing
- Outer Diameter 1 [mm]: 40
- Outer Diameter 2 [mm]: 50
- Width 1 [mm]: 14.6
- Width 2 [mm]: 15
- Inner Diameter 1 [mm]: 17.5
- Weight [kg]: 0.2
- Inner Diameter 2 [mm]: 29
- Supplementary Article/Info 2: with shaft seal
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle both sides
- Weight [kg]: 0.26
- Height 1 [mm]: 14
- Height 2 [mm]: 13
- Outer Diameter 1 [mm]: 50
- Outer Diameter 2 [mm]: 40
- Inner Diameter 1 [mm]: 27
- Inner Diameter 2 [mm]: 17.5
- Manufacturer: METALCAUCHO
- Fitting Position: Front Axle
- Engine Code: X16SZ
- Transmission Type: Manual Transmission
- Width [mm]: 37
- Inner Diameter [mm]: 34
- Outer Diameter [mm]: 64
- Quality class: PJ
- Name: Wheel bearing kit
-
Vehicle Identification Number (VIN) from: R1000001,
R5000001, R7500001 -
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 34
- Outer Diameter [mm]: 66
- Height [mm]: 37
- Manufacturer: JP GROUP
-
Lisainfo: Wheel bearing kit,
for one front wheel -
Additional information: Wheel bearing kit,
for one front wheel
- Fitting Position: Front Axle
- Transmission Type: Manual Transmission
- Engine Code: X 16 SZ
- Width [mm]: 37
- Inner Diameter [mm]: 34
- Outer Diameter [mm]: 64
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Fitting Position: Front Axle
- Transmission Type: Automatic Transmission
- Engine Code: X 16 SZ
- Width [mm]: 37
- Inner Diameter [mm]: 34
- Outer Diameter [mm]: 66
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Fitting Position: Rear Axle
- old version:
- Bearing Type: Tapered Roller Bearing
- Outer Diameter 1 [mm]: 40
- Outer Diameter 2 [mm]: 50
- Width 1 [mm]: 14
- Width 2 [mm]: 14
- Inner Diameter 1 [mm]: 17.5
- Inner Diameter 2 [mm]: 29
- Weight [kg]: 0.274
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Alternative Repair Kit: 100 598 0101,
100 598 0101/ SK -
Fitting Position: Rear Axle,
inner - Inner Diameter [mm]: 29
- Outer Diameter [mm]: 50
- Height [mm]: 14.73
- Bearing Type: Tapered Roller Bearing
- Manufacturer: MEYLE
- Fitting Position: Front Axle both sides
- Height [mm]: 37
- Inner Diameter [mm]: 34
- Outer Diameter [mm]: 64
- Manufacturer: JPN
- Fitting Position: Rear Axle
- Width [mm]: 14
-
Inner Diameter [mm]: 17,
29 -
Outer Diameter [mm]: 40,
50 - Bearing Type: Tapered Roller Bearing
- Weight [kg]: 0.43
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Manufacturer: BLUE PRINT ZAWIESZENIE
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission Type: Manual Transmission
- Vehicle Identification Number (VIN) to: P7999999
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 34
- Outer Diameter [mm]: 64
- Bearing Type: Angular Ball Bearing
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Rear Axle
- old version:
- Bearing Type: Tapered Roller Bearing
- Outer Diameter 1 [mm]: 40
- Outer Diameter 2 [mm]: 50
- Width 1 [mm]: 14
- Width 2 [mm]: 14
- Inner Diameter 1 [mm]: 17.5
- Weight [kg]: 0.274
- Inner Diameter 2 [mm]: 29
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Name: SW 40 85 0001
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: X 16 SZ
- Transmission Type: Manual Transmission
- Fitting Position: Front Axle
- Width [mm]: 37
- Outer Diameter [mm]: 64
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right - Width [mm]: 37
- Inner Diameter [mm]: 34
- Outer Diameter [mm]: 64
-
Fabrication Number: KLP-
DW- 010 - Manufacturer: NTY
- Fitting Position: Front Axle
- Engine Code: X16SZ
- Transmission Type: Fully Automatic
- Width [mm]: 37
- Inner Diameter [mm]: 34
- Outer Diameter [mm]: 66
- Quality class: PJ
- Name: Wheel bearing kit
- Fitting Position: Front Axle
- Engine Code: X16SZ
- Transmission Type: Automatic Transmission
- Width [mm]: 37
- Inner Diameter [mm]: 34
- Outer Diameter 1 [mm]: 66
- Manufacturer: METELLI LOZYSKA KOLA PIASTY
- Engine Code: X16SZ
- Transmission Type: Manual Transmission
- Fitting Position: Front Axle
- Required quantity: 2
- Manufacturer: DRIVE
- Engine Code: X 16 SZ
- Transmission Type: Automatic Transmission
- Fitting Position: Front Axle
- Width [mm]: 37
- Outer Diameter [mm]: 66
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
- Fitting Position: Front Axle
- Transmission Type: Automatic Transmission
- Width [mm]: 37
- Inner Diameter [mm]: 34
- Outer Diameter [mm]: 66
- Manufacturer: OPTIMAL
-
Fitting Position: Front Axle Left,
Front Axle Right - Version: One
- Width 1 [mm]: 37
- Outer Diameter 1 [mm]: 64
- Inner Diameter 1 [mm]: 34
- Manufacturer: GSP AUTOMOTIVE
- Transmission Type: Manual Transmission
- Width [mm]: 37
- Inner Diameter [mm]: 34
- Outer Diameter [mm]: 64
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.465
- Manufacturer: FEBI
Vehicle Identification Number (VIN) to: *********P1999999, *********P5999999, *********P7999999 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Identification Number (VIN) to: P7999999
- Transmission Type: Manual Transmission
- Fitting Position: Front Axle both sides
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 72
- Manufacturer: JPN
-
Vehicle Identification Number (VIN) to: P1999999,
P5999999, P7999999 - Transmission Type: Manual Transmission
- Fitting Position: Front Axle both sides
- Manufacturer: JP GROUP
-
Lisainfo: Wheel bearing front,
left/ right -
Additional information: Wheel bearing front,
left/ right
-
Fitting Position: Front Axle Left,
Front Axle Right - Vehicle configuration line / variant: >Ch P7999999
- Inner Diameter [mm]: 34
- Width 1 [mm]: 37
- Number of mounting bores: 1
- Name: DA KWD1016
- Manufacturer: DAYCO
-
Fitting Position: Front Axle Left,
Front Axle Right - Width 1 [mm]: 37
- Outer Diameter 1 [mm]: 66
- Inner Diameter 1 [mm]: 34
- Manufacturer: GSP
- Transmission Type: Manual Transmission
- Width [mm]: 37
- Inner Diameter [mm]: 34
- Outer Diameter [mm]: 64
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.5
-
Supplementary Article/Supplementary Info: with Split Pin,
with retaining rings - Manufacturer: FEBI BILSTEIN
Vehicle Identification Number (VIN) to: *********P1999999, *********P5999999, *********P7999999 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission Type: Manual Transmission
- not for country specific design: Pakistan
- Width [mm]: 37
- Inner Diameter [mm]: 34
- Outer Diameter [mm]: 66
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.644
-
Supplementary Article/Supplementary Info: with retaining rings,
with Split Pin - Manufacturer: FEBI
Vehicle Identification Number (VIN) from: *********R1000001, *********R5000001, *********R7500001 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Construction Year to: 12.1993
- Transmission Type: Automatic Transmission
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 72
- Supplementary Article/Info 2: without nut
- Manufacturer: OPTIMAL
- Fitting Position: Front Axle
- Transmission Type: Manual Transmission
- Width [mm]: 37
- Inner Diameter [mm]: 34
- Outer Diameter [mm]: 64
- Manufacturer: OPTIMAL
- Vehicle Identification Number (VIN) to: *********P7999999
- Transmission Type: Manual Transmission
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 72
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.62
-
Supplementary Article/Supplementary Info: with retaining rings,
with Split Pin - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter 1 [mm]: 34
- Outer Diameter 1 [mm]: 66
- Weight [kg]: 0.68
- Width 1 [mm]: 37
- Manufacturer: ABS
-
Fitting Position: Front Axle Left,
Front Axle Right - Vehicle configuration line / variant: Ch R7500001>
- Inner Diameter [mm]: 34
- Width 1 [mm]: 37
- Number of mounting bores: 1
- Name: DA KWD1072
- Manufacturer: DAYCO
- Vehicle Identification Number (VIN) to: *********P7999999
- Transmission Type: Manual Transmission
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 72
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.62
-
Supplementary Article/Supplementary Info: with Split Pin,
with retaining rings - Name: SW 40 90 3189
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 34
- Outer Diameter [mm]: 64
- Width [mm]: 37
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 713644160
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.566
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 72
- Packaging length [cm]: 7.2
- Packaging width [cm]: 7.2
- Packaging height [cm]: 3.9
- Manufacturer: FEBEST
-
Fitting Position: Right,
Front Axle - Rotation angle [°]: 90
-
Tightening Torque [Nm]: 20,
130 - Manufacturer: SNR
- Fitting Position: Front Axle
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 120
- Guarantee: 4 years guarantee
- Weight [kg]: 1.35
- Number of Holes: 4
- Bolt Hole Circle Ø 1 [mm]: 100
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV
- Inner Diameter [mm]: 34
- Outer Diameter [mm]: 66
- Width [mm]: 37
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: X16SZ
- Transmission Type: Manual Transmission
- Fitting Position: Front Axle
- Required quantity: 2
- Width [mm]: 37
- Inner Diameter [mm]: 34
- Outer Diameter [mm]: 64
- Manufacturer: SKF
- Name: SK VKBA3256
-
Fitting Position: Right,
Front Axle - Rotation angle [°]: 90
-
Tightening Torque [Nm]: 20,
100 -
Manufacturer: SNR /
NTN- SNR/ - Name: SN R153.25
- Construction Year to: 08.1995
- Fitting Position: Front Axle
- Required quantity: 2
- Transmission Type: Fully Automatic
- Engine Code: X 16 SZ
- Weight [kg]: 0.576
- Packaging length [cm]: 11
- Packaging width [cm]: 9
- Packaging height [cm]: 6
- Outer Diameter [mm]: 66
- Inner Diameter [mm]: 34
- Width [mm]: 37
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ
- Engine Code: X16SZ
- Transmission Type: Fully Automatic
- Fitting Position: Front Axle
- Required quantity: 2
- Width [mm]: 37
- Inner Diameter [mm]: 34
- Outer Diameter [mm]: 66
- Name: SK VKBA3403
- Manufacturer: SKF
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.685
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 74
- Packaging length [cm]: 8
- Packaging width [cm]: 8
- Packaging height [cm]: 4.3
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 34
- Outer Diameter [mm]: 66
- Width [mm]: 37
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 713644150
- Supplementary Article/Info 2: with wheel hub
-
Fitting Position: Rear Axle,
Rear Axle Left, Rear Axle Right -
Fabrication Number: KLT-
PL- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear Axle
- Braking/Driving Dynamics: for vehicles without ABS
- Rim Hole Number: 4
- Flange Diameter [mm]: 136
- Quality class: PJ
- Name: Wheel hub
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Thread Size: M12X1,
5 - Outer Diameter [mm]: 136
- Rim Hole Number: 4
- Manufacturer: GSP
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Supplementary Article/Supplementary Info: with fastening/
mounting material - Supplementary Article/Info 2: with wheel bearing
- Rim Hole Number: 4
- Braking/Driving Dynamics: for vehicles with ABS
- Manufacturer: JP GROUP
-
Lisainfo: Wheel hub,
rear -
Additional information: Wheel hub,
rear
- Fitting Position: Rear Axle
- Braking/Driving Dynamics: for vehicles with ABS
- Flange Diameter [mm]: 136
- Supplementary Article/Info 2: with integrated ABS sensor
- Manufacturer: DENCKERMANN ZAWIESZENIE
-
Supplementary Article/Info 2: with wheel hub,
with integrated ABS sensor -
Fitting Position: Rear Axle,
Rear Axle Left, Rear Axle Right -
Fabrication Number: KLT-
PL- 002 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear Axle
- Braking/Driving Dynamics: for vehicles with ABS
- Flange Diameter [mm]: 136
- Supplementary Article/Info 2: with integrated ABS sensor
- Quality class: PJ
- Name: Wheel hub
- Braking/Driving Dynamics: for vehicles without ABS
-
Vehicle Identification Number (VIN) from: P1000001,
P5000001, P7500001 -
Fitting Position: Rear Axle Left,
Rear Axle Right - Quantity per axle: 2
- Rim Hole Number: 4
- Outer Diameter [mm]: 136
-
Fastening Type: Four-
point attachment - Bolt Hole Circle Ø [mm]: 100
- Manufacturer: TOPRAN
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with nut, with studs General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Version: One
-
Thread Size: M12X1,
5 - Outer Diameter [mm]: 136
- Rim Hole Number: 4
- Manufacturer: GSP
- Braking/Driving Dynamics: for vehicles without ABS
- Fitting Position: Rear Axle
- Rim Hole Number: 4
- Inner Diameter [mm]: 56
- Outer Diameter [mm]: 136
- Width 2 [mm]: 78
- Outer Diameter 1 [mm]: 60.1
- Outer Diameter 2 [mm]: 57.1
- Manufacturer: JPN
- Fitting Position: Rear Axle
- Braking/Driving Dynamics: for vehicles with ABS
- Outer Diameter [mm]: 57
- Bearing Type: Angular Ball Bearing
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 136
- Braking/Driving Dynamics: for vehicles without ABS
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
- Braking/Driving Dynamics: for vehicles without ABS
- Fitting Position: Rear Axle
- Width [mm]: 117
- Internal Toothing wheel side: 24
- Outer Diameter 2 [mm]: 136
- Number of mounting bores: 3
- Manufacturer: METELLI LOZYSKA KOLA PIASTY
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 136
- Guarantee: 4 years guarantee
- Weight [kg]: 3.38
- Number of Holes: 4
- Bolt Hole Circle Ø 1 [mm]: 100
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 29SKV056
- Vehicle Identification Number (VIN) from: *********P3000001
- Braking/Driving Dynamics: for vehicles with ABS
- Width [mm]: 70
- Inner Diameter [mm]: 30
-
Outer Diameter [mm]: 136,
56.5 - Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 4
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 3.35
- Manufacturer: FEBI
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated ABS sensor General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 136
- Braking/Driving Dynamics: for vehicles with ABS
- Guarantee: 4 years guarantee
- Weight [kg]: 3.51
- Number of Holes: 4
- Bolt Hole Circle Ø 1 [mm]: 100
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Vehicle Identification Number (VIN) from: *********P3000001
- Braking/Driving Dynamics: for vehicles with ABS
- Width [mm]: 70
- Inner Diameter [mm]: 30
-
Outer Diameter [mm]: 136,
56.5 - Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 4
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 3.35
- Name: SW 40 90 2843
- Manufacturer: SWAG
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated ABS sensor General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 136
- Braking/Driving Dynamics: for vehicles with ABS
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Version: One
-
Thread Size: M12X1,
5 - Number of Teeth, ABS ring: 58
- Outer Diameter [mm]: 136
- Rim Hole Number: 4
- Supplementary Article/Info 2: with integrated ABS sensor
- Manufacturer: GSP
- Fitting Position: Rear Axle
- Braking/Driving Dynamics: for vehicles with ABS
- Width [mm]: 137
- Internal Toothing wheel side: 26
- Outer Diameter 2 [mm]: 136
- Number of mounting bores: 5
- Manufacturer: METELLI LOZYSKA KOLA PIASTY
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Thread Size: M12X1,
5 - Number of Teeth, ABS ring: 58
- Outer Diameter [mm]: 136
- Rim Hole Number: 4
- Supplementary Article/Info 2: with integrated ABS sensor
- Manufacturer: GSP
- Braking/Driving Dynamics: for vehicles with ABS
-
Vehicle Identification Number (VIN) from: P1000001,
P5000001, P7500001 -
Fitting Position: Rear Axle Left,
Rear Axle Right - Quantity per axle: 2
- Rim Hole Number: 4
- Outer Diameter [mm]: 136
- Number of pins: 2
- Connector Shape: oval
-
Fastening Type: Four-
point attachment - Bolt Hole Circle Ø [mm]: 100
- Manufacturer: TOPRAN
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with nut, with integrated wheel speed sensor, with studs General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Vehicle configuration line / variant: -
ABS Ch P7500001> - Braking/Driving Dynamics: for vehicles without ABS
- Width 1 [mm]: 100
- Supplementary Article/Info 2: with integrated ABS sensor
- Number of mounting bores: 1
- Name: DA KWD1062
- Manufacturer: DAYCO
- Fitting Position: Rear Axle
- Braking/Driving Dynamics: for vehicles with ABS
- Rim Hole Number: 4
- Inner Diameter [mm]: 56
- Outer Diameter [mm]: 136
- Width 2 [mm]: 78
- Outer Diameter 1 [mm]: 60
- Outer Diameter 2 [mm]: 57
- Manufacturer: JPN
- Fitting Position: Rear Axle
- Required quantity: 2
- Braking/Driving Dynamics: for vehicles without ABS
- Rim Hole Number: 4
- Manufacturer: DRIVE
- Fitting Position: Rear Axle
- Rim Hole Number: 4
- Width [mm]: 148.5
- Outer Diameter [mm]: 136
- Braking/Driving Dynamics: for vehicles without ABS
- Manufacturer: OPTIMAL
- Rim Hole Number: 4
- Braking/Driving Dynamics: for vehicles without ABS
- Width [mm]: 107.5
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 136
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 4
- Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 3.152
- Supplementary Article/Supplementary Info: with nuts
- Manufacturer: FEBI BILSTEIN
Vehicle Identification Number (VIN) from: ********PV0000001, ********P10000001, ********P50000001, ********P75000001, ********P80000001 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Required quantity: 2
- Braking/Driving Dynamics: for vehicles with ABS
- Manufacturer: DRIVE
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Braking/Driving Dynamics: for vehicles with ABS
- Outer Diameter 1 [mm]: 136
- Height 1 [mm]: 151
- Rim Hole Number: 4
- Thread Size: M12 x 1.5
- Bolt Hole Circle Ø [mm]: 100
- Outer Diameter 2 [mm]: 60
- Number of flange connections: 4
- Weight [kg]: 3.55
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
Supplementary Article/Info 2: with integrated wheel bearing, with integrated ABS sensor
- Fitting Position: Rear Axle
- Rim Hole Number: 4
- Width [mm]: 148.5
- Outer Diameter [mm]: 136
- Braking/Driving Dynamics: for vehicles with ABS
- Manufacturer: OPTIMAL
- Rim Hole Number: 4
- Braking/Driving Dynamics: for vehicles without ABS
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Info 2: with wheel hub
- Manufacturer: METZGER
- Fitting Position: Rear Axle
- Required quantity: 2
- Braking/Driving Dynamics: for vehicles with ABS
- Flange Diameter [mm]: 136
- Supplementary Article/Info 2: with integrated ABS sensor
- Manufacturer: SKF
- Name: SK VKBA3409
-
Fitting Position: Right,
Rear Axle - No. of holes 1: 4
- No. of holes 2: 4
- Supplementary Article/Info 2: with rubber mount
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN R153.23
-
Fitting Position: Right,
Rear Axle - No. of holes 1: 4
- No. of holes 2: 4
- Manufacturer: SNR
- Construction Year to: 08.1995
- Fitting Position: Rear Axle
- Required quantity: 2
- Braking/Driving Dynamics: for vehicles with ABS
- Weight [kg]: 3.303
- Packaging length [cm]: 15.3
- Packaging width [cm]: 15.6
- Packaging height [cm]: 17.6
- Supplementary Article/Info 2: with integrated ABS sensor
- Outer Diameter [mm]: 136
- Rim Hole Number: 4
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ
- Fitting Position: Rear Axle
- Braking/Driving Dynamics: for vehicles with ABS
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Outer Diameter [mm]: 136
- Outer Diameter 2 [mm]: 57
- Outer Diameter 1 [mm]: 60
- Width 2 [mm]: 78
- Rim Hole Number: 4
- Inner Diameter [mm]: 56
- SVHC: No SVHC present!
- Manufacturer: FAG
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks