• Quantity per packing unit: 10
• contains article number: 13422
• External Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Electrode Gap [mm]: 0.7
• Spark Plug: with gasket seat, 1 - Earthed Electrode
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: C 20 XE
• Spark Plug: 1 - Earthed Electrode, with resistor
• Electrode Gap [mm]: 0.9
• Thread Size: M14 x 1.25
• Thread Length [mm]: 19
• Spanner Size: 16
• Technical Information: Nichel-Chromium with internal in branch
• Manufacturer: MAGNETI MARELLI

• for OE number: 46548478
• Spanner Size: 16 mm
• Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
• Thread Length [mm]: 19
• Manufacturer: KAMOKA

• Engine Number from: 14159541
• Spark Plug: 2 - Earthed Electrode
• Electrode Gap [mm]: 1
• Supplementary Article/Info 2: Do not fit parts from different manufacturers!
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 08.1995
• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Engine Number from: 14159541
• Electrode Gap [mm]: 0.7
• Length [mm]: 126
• Height [mm]: 51
• Weight [kg]: 0.062
• Spark Plug: 1 - Earthed Electrode
• Version: VR7EC1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 12 12 1 704 399
• Spanner Size: 16 mm
• Spark Plug: Nickel Middle Electrode, 2 - Earthed Electrode
• Thread Length [mm]: 19
• Manufacturer: KAMOKA

• Construction Year to: 08.1995
• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Engine Number from: 14159541
• Required quantity: 4
• Electrode Gap [mm]: 0.9
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 3
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Construction Year to: 08.1995
• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Engine Number to: 14159540
• Required quantity: 4
• Electrode Gap [mm]: 0.8
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 3
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS
• Lisainfo: 0242240593 BOSCH
• Additional information: 0242240593 BOSCH

• Engine Code: C 20 XE
• Engine Number from: 14002935/14104355
• Required quantity: 4
• Quantity per packing unit: 4
• for OE number: 1WT318110
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 16
• Tightening Torque [Nm]: 22
• Weight [g]: 43
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 46
• alternative item: IK20
• Manufacturer: DENSO
• Name: DN K20TT
• Lisainfo: K20TT DENSO
• Additional information: K20TT DENSO

• Construction Year to: 08.1995
• Engine Number from: 14159541
• Required quantity: 4
• Electrode Gap [mm]: 1
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 6
• Number of pins: 2
• Name: SššTEKššNAL
• Manufacturer: BOS

• Required quantity: 4
• Alternatively:
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.9
• Connector type: SAE
• Thread Size: M14x1.25
• Spanner Size: 16 mm
• Quality/ Grade: Ti Poly-V
• Packing Type: Box
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Technical Information Number: CET2
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Manufacturer: CHAMPION

• Required quantity: 4
• Alternatively:
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.9
• Connector type: SAE
• Thread Size: M14x1,25
• Spanner Size: 16 mm
• Quality/ Grade: Poly-V Tit
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Name: SššTEKššNAL
• Manufacturer: BERU

• Engine Code: C 20 XE
• Engine Number from: 14002935/14104355
• Quantity: 4
• Spark Plug: 2 - Earthed Electrode
• Weight [kg]: 0.044
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 08.1995
• Engine Number from: 14002935
• Engine Number to: 14159540
• Required quantity: 4
• Electrode Gap [mm]: 0.9
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 6
• Number of pins: 2
• Name: SššTEKššNAL
• Manufacturer: BOS

• Engine Code: C 20 XE
• Engine Number from: 14002935/14104355
• Required quantity: 4
• Quantity per packing unit: 10
• for OE number: 7700500168
• Connector type: Removable SAE
• Diameter [mm]: 14
• Spanner Size: 16
• Tightening Torque [Nm]: 22
• Weight [g]: 43
• Spark Plug: 2 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 46
• alternative item: K20TT
• Manufacturer: DENSO
• Name: DN K20TXR
• Lisainfo: K20TXR DENSO
• Additional information: K20TXR DENSO

• Electrode Gap [mm]: 0.8
• Quantity per packing unit: 4
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 6
• Name: SššTEKššNAL
• Manufacturer: NGK
• Additional information: V-LINE 20
• Lisainfo: V-LINE 20

Spark Plug: Nickel Middle Electrode, 2 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat, Fixed SAE connector

• Electrode Gap [mm]: 0.8
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 6
• Name: SššTEKššNAL
• Manufacturer: NGK
• Additional information: BKR6EK
• Lisainfo: BKR6EK

Spark Plug: Nickel Middle Electrode, 2 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat, Fixed SAE connector

• Construction Year to: 08.1995
• Engine Number from: 14002935
• Engine Number to: 14159540
• Electrode Gap [mm]: 0.8
• External Thread [mm]: M14 x 1,25
• Spanner Size: 16
• Spark Plug: 3 - Earthed Electrode
• Thread Length [mm]: 19
• Weight [kg]: 0.044
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 4
• Quantity per packing unit: 10
• Electrode Gap [mm]: 1
• Connector type: M4/SAE
• Thread Size: M14x1.25
• Spanner Size: 16 mm
• Quality/ Grade: Nickel GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: RC10DMC
• Spark Position [mm]: 6.1
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 9
• Projection [mm]: 3.6
• Name: CH OE019/T10
• Manufacturer: CHAMPION

Spark Plug: 2 - Earthed Electrode, with gasket seat, Copper Centre Electrode

• Required quantity: 4
• Quantity per packing unit: 10
• Electrode Gap [mm]: 1
• Connector type: SAE
• Thread Size: M14x1,25
• Spanner Size: 16 mm
• Spark Plug: 2 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Technical Information Number: 14 FR-8 LDUOX4
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Name: SššTEKššNAL
• Manufacturer: BERU

• Engine Code: C 20 XE
• Spark Plug: 1 - Earthed Electrode, with resistor
• Electrode Gap [mm]: 0.9
• Thread Size: M14 x 1.25
• Thread Length [mm]: 19
• Spanner Size: 16
• Technical Information: Platinum-tip
• Name: MM SPB7206-9
• Manufacturer: MAGNETI MARELLI

• Construction Year to: 08.1995
• Fuel Type: CNG/LPG
• Replace after km: 30,000
• Engine Number from: 14159541
• Electrode Gap [mm]: 1.1
• Thread Size: M14
• Spanner Size: 16 [mm]
• Number of pins: 1
• Thread Length [mm]: 19
• Thread Pitch [mm]: 1.25
• Weight [kg]: 0.045
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 08.1995
• Engine Number to: 14002934
• Required quantity: 4
• Quantity Unit: Kit
• Electrode Gap [mm]: 0.9
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 3
• Number of pins: 1
• Manufacturer: BOSCH
• Name: BS 0242235912

• Construction Year to: 08.1995
• Fuel Type: CNG/LPG
• Replace after km: 30,000
• Engine Number from: 14159541
• Required quantity: 4
• Electrode Gap [mm]: 0.7
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 4
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Tightening Torque [Nm]: 25
• Electrode Gap [mm]: 1
• Thread Size: M14 x 1.25
• Spanner Size: 16
• Spark Plug: 1 - Earthed Electrode
• Thread Length [mm]: 19
• Assy./disassy. by qualified personnel required!:
• Name: HE 8EH188706071
• Manufacturer: HELLA

• Required quantity: 4
• Alternatively:
• Quantity per packing unit: 4
• Electrode Gap [mm]: 0.8
• Connector type: SAE
• Thread Size: M14x1.25
• Spanner Size: 16 mm
• Quality/ Grade: Pt GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: RC10WMPB3
• Spark Position [mm]: 5
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 9.5
• Packaging width [cm]: 2.4
• Packaging height [cm]: 2.4
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 3
• Name: CH CCH9013
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode

• Construction Year to: 08.1995
• Engine Number from: 14002935
• Engine Number to: 14159540
• Required quantity: 4
• Quantity Unit: Kit
• Electrode Gap [mm]: 0.9
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 6
• Number of pins: 2
• Manufacturer: BOSCH
• Name: BS 0242235914

• Construction Year to: 08.1995
• Fuel Type: CNG/LPG
• Replace after km: 30,000
• Engine Number to: 14159540
• Required quantity: 4
• Electrode Gap [mm]: 0.7
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 4
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Engine Code: C 20 XE
• Engine Number from: 14002935/14104355
• Required quantity: 4
• Fuel Type: CNG/LPG
• Quantity per packing unit: 4
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 16
• Tightening Torque [Nm]: 22
• Weight [g]: 43
• Thread Length [mm]: 19
• Gross Weight [g]: 46
• alternative item: IK20TT
• Manufacturer: DENSO
• Name: DN IK20TT
• Lisainfo: IK20TT DENSO
• Additional information: IK20TT DENSO

Spark Plug: with resistor, 1 - Earthed Electrode, Iridium Middle Electrode, Platinum mass electrode

• Electrode Gap [mm]: 0.8
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK

Spark Plug: Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector

• Required quantity: 4
• Fuel Type: Liquefied Petroleum Gas (LPG)
• Alternatively:
• Recommended change interval [km]: 30,000
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.7
• Connector type: SAE
• Thread Size: M14x1,25
• Spanner Size: 16 mm
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Technical Information Number: 14 FR-7 DPPUS2
• Self-service suited packaging see parts list:
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Name: SššTEKššNAL
• Manufacturer: BERU

• Electrode Gap [mm]: 0.8
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Spark Plug: Iridium Middle Electrode, Fixed SAE connector
• Fuel Type: CNG/LPG
• Recommended change interval [km]: 60,000
• Name: SššTEKššNAL
• Manufacturer: NGK
• Lisainfo: LPG1
• Additional information: LPG1