• Construction Year to: 08.1995
• Fitting Position: Front Axle
• Brake System: ATE
• Height [mm]: 52.3
• Width [mm]: 156
• Thickness [mm]: 17.5
• Wear Warning Contact: prepared for wear warning indicator
• Lisainfo: Brake pad set, front, 17.6 mm
• Additional information: Brake pad set, front, 17.6 mm

• Filtritüüp: Keeratav filter, Filtrer
• Manufacturer: DELLO AUTOMEGA

• Quantity per packing unit: 75
• Filter type: In-Line Filter
• Height [mm]: 140
• Outer Diameter [mm]: 55
• Outlet Ø [mm]: 8
• Inlet Ø [mm]: 8
• Manufacturer: SCT MANNOL

• OE-numbri jaoks: 6N0 201 511 A
• Filtritüüp: Ühendusfilter
• Manufacturer: TRUCKTEC

• Filtritüüp: Ühendusfilter
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• OE-numbri jaoks: 119113204500
• Kõrgus (mm): 140
• Kütuseliik: Bensiin
• Välisläbimõõt [mm]: 56
• Manufacturer: KAMOKA

• Construction Year to: 09.1995
• Engine Code: C 20 NE
• Filtritüüp: Ühendusfilter
• Kõrgus (mm): 131
• Välisläbimõõt [mm]: 62
• Välisläbimõõt 1 [mm]: 56
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• Kaal (kg): 0,1
• Name: VA 587003
• Manufacturer: VALEO

• Filtritüüp: Ühendusfilter
• Pikkus (mm): 80, 138
• Korpuse materjal: Metall
• Välisläbimõõt [mm]: 55, 59
• Kaal (kg): 0,126
• Manufacturer: FEBI-FILTRY

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: In-Line Filter
• Height [mm]: 140
• Outer Diameter [mm]: 59
• Inlet Ø [mm]: 9.3
• Outlet Ø [mm]: 8
• Packing Type: Carton
• Packaging length [cm]: 6.4
• Packaging width [cm]: 6.4
• Packaging height [cm]: 17.8
• Name: CH CFF100201
• Manufacturer: CHAMPION

• Filtritüüp: Filtrer
• Läbimõõt [mm]: 60
• Siseläbimõõt 1 [mm]: 8
• Siseläbimõõt 2 (mm): 8
• Kõrgus (mm): 135
• OE-numbri jaoks: 7606404
• Manufacturer: MEAT & DORIA

• Filtritüüp: Keeratav filter
• Kõrgus (mm): 140
• Välisläbimõõt [mm]: 56
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Filter type: In-Line Filter
• Height [mm]: 138
• Outer Diameter 1 [mm]: 55
• Outer Diameter 2 [mm]: 59
• Inner Diameter 1 [mm]: 8
• Inner Diameter 2 [mm]: 8
• Manufacturer: DENCKERMANN FILTRY

• Filtritüüp: Ühendusfilter
• Kõrgus (mm): 138
• Välisläbimõõt [mm]: 60
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• SVHC: SVHS aineid ei esine
• Manufacturer: FILTRON

• Filtritüüp: Filtrer
• Läbimõõt [mm]: 60
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• Kõrgus (mm): 160
• OE-numbri jaoks: 156789
• Manufacturer: MEAT & DORIA

• Läbimõõt [mm]: 55
• Materjal: Plastik
• Filtritüüp: Ühendusfilter
• Kõrgus (mm): 139
• Manufacturer: DELPHI
• Name: DE EFP214

• Filter type: Spin-on Filter
• Height [mm]: 139
• Inner Diameter [mm]: 8
• Outer Diameter [mm]: 55
• Quality class: PJ
• Name: Fuel filter

• Filtritüüp: Ühendusfilter
• Välisläbimõõt 1 [mm]: 56
• Väljalase-Ø (mm): 8
• Keermemõõt: 8 mm
• Kõrgus (mm): 138
• Korpuse materjal: Alumiinium
• Manufacturer: KOLBENSCHMIDT

• Driven Units: Camshaft
• Vehicle Equipment Line/Variant: >Ch M5999999
• Number of Teeth: 111
• Width [mm]: 20
• Name: DA 94080
• Manufacturer: DAYCO

• Construction Year to: 08.1995
• Fitting Position: Rear Axle
• Width [mm]: 61.7
• Thickness [mm]: 15
• Height [mm]: 57.5
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact

• Construction Year to: 08.1995
• Engine Number to: 14608700
• Number of Teeth: 111
• Length [mm]: 1,057
• Width [mm]: 20
• Tooth Pitch [mm]: 9.525
• Manufacturer: BOSCH

• Filtritüüp: Ühendusfilter
• Kõrgus (mm): 139
• Välisläbimõõt [mm]: 55
• Läbimõõt 3 (mm): 8
• Läbimõõt 4 (mm): 8
• Manufacturer: PURFLUX

• Construction Year to: 08.1995
• Kütusesüsteemi seadmed: Bensiini sissepritse
• Filtritüüp: Ühendusfilter
• Läbimõõt [mm]: 55
• Välisläbimõõt 1 [mm]: 63
• Kõrgus (mm): 144
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• Name: BS 0450905280
• Manufacturer: BOSCH

• Filter type: In-Line Filter
• Outer Diameter [mm]: 54.5
• Height [mm]: 139.5
• Manufacturer: HENGST FILTRY

• Filtritüüp: Ühendusfilter
• Läbimõõt [mm]: 55
• Kõrgus (mm): 140
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• Netokaal [g]: 101
• pakendi kõrgus [cm]: 14,6
• pakendi pikkus [cm]: 5,6
• pakendi laius [cm]: 5,6
• Name: KN KL14
• Manufacturer: KNECHT

• Vehicle Identification Number (VIN) to: NV, N1, N5
• Width [mm]: 20
• Number of Teeth: 111
• Belts: with rounded tooth profile
• Weight [kg]: 0.18
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: In-Line Filter
• Diameter [mm]: 55
• Height [mm]: 140
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Net Weight [g]: 101
• Packaging height [cm]: 14.6
• Packaging width [cm]: 5.6
• Packaging length [cm]: 5.6
• Manufacturer: MAHLE KNECHT

• Vehicle Identification Number (VIN) to: NV299999
• Fitting Position: Rear Axle
• Diameter [mm]: 160
• Width [mm]: 25
• Brake System: TEVES
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Driven Units: Camshaft
• Engine Number to: 14142838
• Article number of the recommended special tool: STT-1
• Tensile Cord Material: Fiberglass
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Number of Teeth: 111
• Width [mm]: 20
• Tooth Pitch [mm]: 9.525
• Length [mm]: 1,057
• Manufacturer: GATES

• EU Product Safety Regulation (GPSR): IEC 60417-6183 mechanical expertise required
• Filter type: In-Line Filter
• Height [mm]: 138
• Outer Diameter [mm]: 55
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: MANN

• Driven Units: Camshaft
• Engine Number to: (14/25)142838
• Number of Teeth: 111
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.159
• Width [mm]: 20
• Tooth Pitch [mm]: 9.525
• Manufacturer: CONTITECH
• Name: CT 720

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• FMSI Code: D427-7316
• Test Mark: E1 90R-011094/467
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 21140
• Friction Lining Material: Organic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 61.8
• Width 2 [mm]: 61.6
• Height 1 [mm]: 57.6
• Height 2 [mm]: 57.6
• Thickness 1 [mm]: 15.5
• Thickness 2 [mm]: 15.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP586

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: S*000001
• Thickness [mm]: 17.5
• Test Mark: R90
• Width [mm]: 156.5
• Height [mm]: 52
• Manufacturer: KAVO PARTS

• Construction Year to: 09.1995
• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 62
• Height [mm]: 57.6
• Thickness [mm]: 15
• Wear Warning Contact: without integrated wear sensor
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• WVA Number: 21140
• Weight [kg]: 0.64
• Manufacturer: VALEO

• Driven Units: Camshaft
• Vehicle Equipment Line/Variant: Ch N5000001>
• Number of Teeth: 146
• Width [mm]: 20
• Name: DA 94662
• Manufacturer: DAYCO

Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Width [mm]: 25
• Drum diameter [mm]: 160
• Registration Type: ECE approved
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Kõrgus 1 (mm): 52,8
• Pidurisüsteem: ATE
• Laius 1 (mm): 156,4
• Jämedus/Tugevus 1 (mm): 17
• Manufacturer: PROFIPOWER

• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 15.5
• Width [mm]: 61.7
• Height [mm]: 57.5
• Brake System: ATE
• Weight [kg]: 0.57
• Manufacturer: TOMEX

• Construction Year to: 08.1995
• Engine Number from: 14608701
• Number of Teeth: 146
• Length [mm]: 1,168
• Width [mm]: 20
• Tooth Pitch [mm]: 8
• Manufacturer: BOSCH

• Length [mm]: 61.7
• Width [mm]: 57.5
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 15.5
• Wear Warning Contact: excl. wear warning contact
• Weight [kg]: 0.741
• Observe service information:
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• Laius (mm): 25
• Pidurisüsteem: Ate/Teves
• Piduritrumli läbimõõt seespool [mm]: 160
• Kaal (kg): 0,88
• Manufacturer: TOMEX

• Fitting Position: Rear Axle
• Brake System: Ate
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 57.7
• Wear Warning Contact: excl. wear warning contact
• Vibration: with vibration damper
• Width 1 [mm]: 61.7
• Thickness 1 [mm]: 15.5
• Manufacturer: METELLI UKL.HAMULCOWY

• Construction Year to: 09.1995
• Fitting Position: Front Axle
• Brake System: TEVES
• Width [mm]: 156
• Height [mm]: 52.4
• Thickness [mm]: 17.5
• Wear Warning Contact: without integrated wear sensor
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• WVA Number: 21201
• Weight [kg]: 1.2
• Manufacturer: VALEO
• Name: VA 301184

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Manufacturer Restriction: ATE
• Wear Warning Contact: not prepared for wear warning indicator
• WVA Number: 21140
• Test Mark: E1 90R-01814/128
• Width [mm]: 61.7
• Thickness [mm]: 15.8
• Height [mm]: 57.5
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Construction Year to: 08.1995
• Fitting Position: Rear Axle
• Width [mm]: 61.7
• Height [mm]: 57.5
• Thickness [mm]: 15
• Brake System: ATE
• ABE No.: KBA 60401
• MAPP code available:
• Article number of recommended accessories: 13.0460-0217.2
• Observe dimensions:
• Manufacturer: ATE

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Brake Disc Type: solid
• Length [mm]: 140.2, 141.4
• Width [mm]: 58.1, 48.2
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Thickness 1 [mm]: 16
• Weight [kg]: 1.23
• Observe service information:
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Engine Number from: (14/25)142839
• Number of Teeth: 146
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.162
• Width [mm]: 20
• Tooth Pitch [mm]: 8
• Manufacturer: CONTITECH

• Construction Year to: 08.1995
• Fitting Position: Rear Axle
• Article number of recommended accessories: 1987474014, 1987474928, 1987474277, 1987474192
• Product must be determined on the vehicle or the motor:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21140
• Thickness [mm]: 15
• Width [mm]: 61.7
• Height [mm]: 57.5
• Brake System: ATE
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: not prepared for wear warning indicator
• Test Mark: E1 90R 01025/012
• Height [mm]: 57.5
• Width [mm]: 61.7
• Thickness [mm]: 15.5
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake Disc Type: solid
• Length [mm]: 140, 141
• Width [mm]: 58, 48
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Thickness 1 [mm]: 16
• Weight [kg]: 1.23
• Observe service information:
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 08.1994
• Width [mm]: 156.5
• Height [mm]: 52.4
• Thickness [mm]: 18.3
• Wear Warning Contact: prepared for wear warning indicator
• WVA Number: 21862, 21190
• Fitting Position: Front Axle
• for OE number: 11046156
• Manufacturer: ASHIKA-KLOCKI

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Height [mm]: 52.8
• Width [mm]: 156.4
• Thickness [mm]: 18.1
• Manufacturer: AUTO-GH

• Vehicle Identification Number (VIN) from: *********S5000001
• Length [mm]: 156.5
• Width [mm]: 52.6
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.38
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Width [mm]: 61.7
• Height [mm]: 57.5
• Thickness [mm]: 15.7
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Manufacturer: MEYLE

• Fitting Position: Front Axle
• Brake Disc Type: solid
• Length [mm]: 140.2, 141.4
• Width [mm]: 58.1, 48.2
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Thickness 1 [mm]: 16
• Weight [kg]: 1.23
• Name: SW 40 91 6055
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Number from: 14608701
• Width [mm]: 22
• Outer Diameter [mm]: 59
• Height [mm]: 33.5
• Manufacturer: OPTIMAL

• Driven Units: Camshaft
• Engine Number from: 14142839
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Colour: black
• Number of Teeth: 146
• Width [mm]: 20
• Tooth Pitch [mm]: 8
• Length [mm]: 1,168
• Manufacturer: GATES

• Fitting Position: Front Axle
• Brake System: Ate
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 52.6
• Wear Warning Contact: prepared for wear warning indicator
• Vibration: without vibration damper
• Width 1 [mm]: 156.4
• Thickness 1 [mm]: 18
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D796-7666
• Test Mark: E1 90R-01881/1032
• Brake System: Continental
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 21201, 21190
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear warning indicator
• Width 1 [mm]: 156.4
• Width 2 [mm]: 156.3
• Height 1 [mm]: 52.5
• Height 2 [mm]: 52.5
• Thickness 1 [mm]: 17
• Thickness 2 [mm]: 17
• Manufacturer: DELPHI HAMULCE

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D796-7666
• Test Mark: E1 90R-01881/1032
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 21201, 21190
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear warning indicator
• Width 1 [mm]: 156.7
• Width 2 [mm]: 156.3
• Height 1 [mm]: 52.5
• Height 2 [mm]: 52.5
• Thickness 1 [mm]: 17
• Thickness 2 [mm]: 17
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP1605

• Vehicle Identification Number (VIN) from: *********S5000001
• Length [mm]: 156.5
• Width [mm]: 52.6
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.38
• Name: SW 40 91 6030
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 62
• Thickness [mm]: 16
• Height [mm]: 58
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• Supplementary Article/Info 2: with anti-squeak plate
• WVA Number: 21140
• Manufacturer: BREMBO
• Name: BR P 59 018

• Construction Year to: 08.1995
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with piston clip, with anti-squeak plate
• Product must be determined on the vehicle or the motor:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21190
• Thickness [mm]: 18.3
• Width [mm]: 156.6
• Height [mm]: 52.4
• Brake System: ATE
• Manufacturer: BOSCH

Article number of recommended accessories: 1987474126, 1987474972, 1987474179, 1987474210, 1987474241, 1987474393, 1987474578, 1987474580, 1987474586, 1987474604, 1987474907, 1987474908, 1987474909, 1987474923, 1987474928, 1987474929, 1987474930, 1987474936, 1987474173

• Fitting Position: Front Axle
• Width 1 [mm]: 156.4
• Height 1 [mm]: 52.8
• Thickness 1 [mm]: 17
• Brake System: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.54
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Front Axle
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• WVA Number: 21190, 21201
• Test Mark: E1 90R-01811/045
• Width [mm]: 156.3
• Thickness [mm]: 17.5, 16.7
• Height [mm]: 52.5
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Front Axle
• Width [mm]: 156.3
• Height [mm]: 52.2
• Thickness [mm]: 17.6
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Manufacturer: MEYLE

• Fitting Position: Front Axle
• Width [mm]: 156.5
• Height [mm]: 52.4
• Thickness [mm]: 18.3
• Wear Warning Contact: prepared for wear warning indicator
• WVA Number: 21862
• Brake System: Teves
• Article number of recommended accessories: 82028900
• Packaging length [cm]: 17
• Packaging width [cm]: 12
• Packaging height [cm]: 8.3
• Weight [kg]: 1.45
• Manufacturer: TEXTAR
• Quality class: Q
• Name: Brake pads

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Width [mm]: 156
• Thickness [mm]: 18
• Height [mm]: 53
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Teves
• Supplementary Article/Info 2: with piston clip, with anti-squeak plate
• WVA Number: 21190, 21862
• Manufacturer: BREMBO
• Name: BR P 59 017

• Construction Year to: 08.1995
• Fitting Position: Front Axle
• Width [mm]: 156.3
• Height [mm]: 52.3
• Thickness [mm]: 17.5
• Brake System: ATE
• Test Mark: E9 90R-02A1251/4454
• MAPP code available:
• Observe dimensions:
• Manufacturer: ATE
• Quality class: Q
• Name: Brake pads

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact Article number of recommended accessories: 24.8190-0705.2, 24.8190-0706.2, 24.8190-0708.2, 24.8190-0715.2, 24.8190-0947.2

• Width 1 [mm]: 33
• Outer Diameter 1 [mm]: 59
• Name: SN GT353.18
• Manufacturer: NTN-SNR

• Vehicle Equipment Line/Variant: Ch N5000001>
• Belt Pulley Ø [mm]: 60
• Height 1 [mm]: 22
• Height 2 [mm]: 31.6
• Weight [kg]: 0.4
• Name: DA ATB2216
• Manufacturer: DAYCO

• Engine Number from: 14 608701
• Diameter [mm]: 59
• Width [mm]: 22
• Tensioner Pulley Actuation: Automatic
• Manufacturer: SKF
• Name: SK VKM15402

• Engine Number from: 14608701
• Outer Diameter [mm]: 59
• Width [mm]: 22
• Follow installation instructions:
• SVHC: No SVHC present!
• Name: LU 531027330
• Manufacturer: INA

• Number of track rollers: 1
• Number of belts: 1
• Width 1 [mm]: 20
• Number of Teeth: 146
• Manufacturer: SNR /NTN-SNR/

• Construction Year to: 08.1995
• Engine Number from: 14608701
• Number of Teeth: 146
• Length [mm]: 1,168
• Width [mm]: 20
• Tooth Pitch [mm]: 8
• Number of track rollers: 1
• Manufacturer: BOSCH ROZRZAD/PASKI

• Construction Year to: 08.1995
• Engine Number to: 14608700
• Length [mm]: 1,057
• Number of Teeth: 111
• Width [mm]: 20
• Tooth Pitch [mm]: 9.525
• Name: BS 1987948737
• Manufacturer: BOSCH

• Driven Units: Camshaft
• Vehicle Equipment Line/Variant: Ch N5000001>
• Number of Teeth: 146
• Width [mm]: 20
• Length [mm]: 1,168
• Number of belts: 1
• Pulleys contained: 1
• Weight [kg]: 0.6
• Name: DA KTB254
• Manufacturer: DAYCO

• Engine Number from: 14 608701
• Belt Width [mm]: 20
• Colour: black
• Number of Teeth: 146
• Belts: with rounded tooth profile
• Manufacturer: SKF

• Engine Number to: 14 608700
• Water pump impeller material: Plastic
• Belt Width [mm]: 20
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 111
• Belts: with rounded tooth profile
• Manufacturer: SKF

• Width [mm]: 20
• Number of Teeth: 146
• Belts: with rounded tooth profile
• Weight [kg]: 0.472
• Observe service information:
• Name: SW 40 02 0027
• Manufacturer: SWAG

Vehicle Identification Number (VIN) from: *********NV000001, *********N1000001, *********N5000001 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Number from: 14608701
• Number of Teeth 1: 146
• Width 1 [mm]: 20
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Manufacturer: INA