• Fabrication Number: ECP-AR-013
• Manufacturer: NTY

• Engine Code: X 20 XEV
• Thread Size: 1/8-27NPT
• Spanner Size: 13
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.288, 1.880.343, 1.880.344, 1.880.346, 1.880.348

• Engine Code: X 20 XEV
• Thread Size: 1/8-27NPT
• Spanner Size: 13
• for article number: 7.8288, 7.8343, 7.8344, 7.8346, 7.8348
• Manufacturer: FACET

• Length [mm]: 615
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Number of pins: 2
• Socket colour: light blue
• Connector Shape: rectangular
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 60800167
• Manufacturer: MEAT&DORIA

• Number of pins: 1
• Thread Size: 1/8x27NPT
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Connector Shape: rectangular
• Socket colour: light blue
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19
• for OE number: 7695581
• Manufacturer: MEAT & DORIA

• Engine Code: X 20 XEV
• Operating Mode: Mechanical
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: MAX

• Engine Code: X 20 XEV
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 7.8100, 7.8108, 7.8141, 7.8152, 7.8153, 7.8193
• Manufacturer: FACET

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 1,014, 146
• Temperature range from [°C]: 25
• Temperature range to [°C]: +80
• Thread Size: 1/8-27 NPT
• Sensor Type: NTC Sensor
• Number of pins: 1
• Housing Colour: black
• Number of mounting bores at thermostat housing: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107161
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: X 20 XEV
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.100, 1.880.108, 1.880.141, 1.880.152, 1.880.153, 1.880.193

Manufacturer: DELLO AUTOMEGA

• Connector Shape: rectangular
• Number of pins: 3
• Fitting Position: Throttle Housing
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV218

• Thread Size: M12x1,5
• Housing Colour: blue
• Manufacturer: FAE ELEKTRYKA

• Tightening torque to [Nm]: 22
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Colour Coding: blue
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA104

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Number of pins: 3
• Operating Mode: Mechanical
• Manufacturer: DELPHI
• Name: DE SS10992-12B1

• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Rotation Direction: Anticlockwise rotation
• Supplementary Article/Info 2: without cable
• for OE number: 8945205010
• Manufacturer: MEAT & DORIA

• Engine Code: X 20 XEV
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Supplementary Article/Info 2: with cable
• Connector Shape: oval
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Engine Code: X 20 XEV
• Manufacturer: FACET

• Length [mm]: 106
• Number of connectors: 3
• Colour: black
• Lisainfo: Sensor, camshaft position
• Additional information: Sensor, camshaft position

Manufacturer: DELLO AUTOMEGA

• Engine Code: X 20 XEV
• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 550713
• Manufacturer: ERA

• Engine Code: X 20 XEV
• Mounting Type: Plugged
• Number of connectors: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Supplementary Info: with gasket/seal
• Voltage [V]: 12
• Resistor [Ohm]: 2,055, 327
• Number of pins: 2
• Housing Colour: blue
• Thread Size: M12x1,5
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Temperature range [°C]: 25, 80
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009309291
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead, 1303-86-2; Diboron trioxide Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 3
• Connector Shape: rectangular
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• for OE number: 6238187
• Name: Andur,steimpulss
• Manufacturer: MD

• Engine Code: X 20 XEV
• valikuliselt:
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikukatte kuju: ristkülik
• Kaal (kg): 0,024
• alternatiivne remondikomplekt: 550144
• Manufacturer: ERA

• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Supplementary Article/Info 2: with rubber bellow, with cable
• Connector Shape: oval
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: X 20 XEV
• Material: Plastic
• Alternatively:
• Number of pins: 3
• Housing Colour: black
• Number of mounting bores: 2
• Alternative Repair Kit: 550301
• Manufacturer: ERA

• Number of pins: 2
• Colour Coding: black
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Alternatively:
• Number of pins: 3
• Weight [kg]: 0.06
• Alternative Repair Kit: 550060
• Manufacturer: ERA

• Number of connectors: 3
• Number of mounting bores: 1
• Additionally required articles (article numbers): Electrode plate
• Cable Length 1 [mm]: 390
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Sensor Type: Inductive Sensor
• Connector Shape: rectangular
• Colour: black
• Name: SN CMP153.02
• Manufacturer: SNR

• Length [mm]: 515
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

Manufacturer: FAE

• Name: CZUJNIK POO½ENIA WAKA ROZRZ¤DU OPEL
• Manufacturer: VMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.1993
• Engine Code: X 20 XEV
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO
• Name: VA 253834

• Construction Year from: 11.1993
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: BOS

• Housing Type: with housing
• Fabrication Number: EPP-PL-001
• Manufacturer: NTY

• Engine Code: X 20 XEV
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: EPS

Manufacturer: DELLO AUTOMEGA

• Supplementary Article/Info 2: with potentiometer
• Manufacturer: METZGER

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 4
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.3
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV114

• Engine Code: X 20 XEV
• for OE number: 90411972
• Cable Length [mm]: 350
• Tolerance [%]: +10, -10
• Number of pins: 3
• Colour: black
• Manufacturer: VDO

• Number of pins: 4
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: MAX

• Number of pins: 4
• Housing Type: with housing
• Manufacturer: JP-GROUP
• Lisainfo: Air meter
• Additional information: Air meter

• Number of pins: 4
• Oxygen Sensor: Heated
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Exhaust System: before catalytic converter
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 760
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,11
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV501

• Fitting Position: before catalytic converter
• Engine Code: X 20 XEV
• Oxygen Sensor: Regulating Sensor
• Length [mm]: 820
• Number of pins: 4
• Technical Information Number: Universal 77013
• Manufacturer: FAE

• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Regulating Sensor
• Pinge [V]: 12
• Pikkus (mm): 820
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,11
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV

• Engine Code: X 20 XEV
• Oxygen Sensor: Regulating Sensor, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 820
• Manufacturer: PIERBURG

• Fitting Position: before catalytic converter
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Kaablipikkus (mm): 720
• Lambda andur: Sond, Keere eelmääritud
• Ülekandeliinide arv: 4
• Manufacturer: VIEROL

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: X 20 XEV
• Number of pins: 4
• Colour: black
• Manufacturer: VDO