Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: C 18 NZ
-
Thread Size: 1/
8- 27NPT - Spanner Size: 13
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
for article number: 1.880.288, 1.880.343, 1.880.344, 1.880.346, 1.880.348
- Engine Code: C 18 NZ
-
Thread Size: 1/
8- 27NPT - Spanner Size: 13
-
for article number: 7.8288,
7.8343, 7.8344, 7.8346, 7.8348 - Manufacturer: FACET
- Construction Year to: 08.1995
- Number of pins: 2
- Socket colour: light blue
- Connector Shape: rectangular
-
Thread Size: M 12x1,
5 - Sensor Type: NTC Sensor
- Spanner Size: 19 mm
- for OE number: 60800167
- Manufacturer: MEAT&DORIA
- Number of pins: 1
-
Thread Size: 1/
8x27NPT - Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Connector Shape: round
- Number of pins: 3
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
for OE number: 12569240,
1920 FC, 62 38 927, 7 700 706 876 - Number of pins: 3
-
Fabrication Number: ECM-
PL- 008 - Manufacturer: NTY
-
Lisainfo: OPEL ASTRA G 1.4 16V,
VECTRA B 1.6 95- -
Additional information: OPEL ASTRA G 1.4 16V,
VECTRA B 1.6 95-
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Mounting Type: Bolted
- Voltage [V]: 12
-
Resistor [Ohm]: 1,
014, 146 - Temperature range from [°C]: 25
- Temperature range to [°C]: +80
-
Thread Size: 1/
8- 27 NPT - Sensor Type: NTC Sensor
- Number of pins: 1
- Housing Colour: black
- Number of mounting bores at thermostat housing: 1
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PT009107161
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of pins: 3
- Rotation Direction: Anticlockwise rotation
- Number of mounting bores: 2
- Supplementary Article/Info 2: without cable
- for OE number: 17106682
-
Name: Andur,
drosselklapiasend - Manufacturer: MD
- for OE number: 13 62 1 709 967
- Width [mm]: 45
- Height [mm]: 40
- Length [mm]: 75
- Guarantee: 3 years guarantee
- Number of pins: 2
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Engine Code: C 18 NZ
- Operating Mode: Mechanical
- Rotation Direction: Anticlockwise rotation
-
Name: ANDUR,
DROSSELKLAPIASEND - Manufacturer: MAX
- Engine Code: C 18 NZ
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
for article number: 1.880.113,
1.880.114, 1.880.149, 1.880.151 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Engine Code: C 18 NZ
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
for article number: 7.8113,
7.8114, 7.8149, 7.8151 - Manufacturer: FACET
- Tightening torque to [Nm]: 22
- Sensor Type: NTC Sensor
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Colour Coding: blue
- Manufacturer: MAGNETI MARELLI
- Name: MM SPA104
- Engine Code: C 18 NZ
- Number of pins: 2
- Height [mm]: 51.8
- Supplementary Article/Info 2: with seal ring
-
Thread Size: M12x1,
5 - Housing Colour: blue
- Spanner Size: 19
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 3
- Operating Mode: Mechanical
- Rotation Direction: Anticlockwise rotation
-
Name: ANDUR,
DROSSELKLAPIASEND - Manufacturer: DLP
- Construction Year to: 08.1995
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: BOS
- Engine Code: C 18 NZ
- Mounting Type: Bolted
- Voltage [V]: 12
-
Resistor [Ohm]: 2,
080, 302 -
Supplementary Article/Supplementary Info: with gasket/
seal - Temperature range from [°C]: 25
- Temperature range to [°C]: +80
-
Thread Size: M12x1,
5 - Colour: blue
- Spanner Size: 19
- Sensor Type: NTC Sensor
- Number of pins: 2
- Corresponds to the original part in colour: blue
- Manufacturer Restriction: Bosch
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Rotation Direction: Anticlockwise rotation
- Number of pins: 3
- Weight [kg]: 0.022
- Manufacturer: ERA
- Pressure from [kPA]: 15
- Pressure to [kPA]: 10
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Number of pins: 3
- Pressure from [kPA]: 15
- Pressure to [kPA]: 100
- for OE number: 6238927
- Manufacturer: MEAT&DORIA
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Guarantee: 3 years guarantee
- Weight [kg]: 0.07
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV101
Manufacturer: MAGNETI MARELLI
Manufacturer: MAGNETI MARELLI
- Engine Code: C 18 NZ
- Number of connectors: 3
- Manufacturer: JPN
- Fitting Position: before catalytic converter
- Oxygen Sensor: Regulating Sensor
- Number of pins: 1
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Colour: black
- Alternatively:
- Number of pins: 3
- Weight [kg]: 0.064
- Alternative Repair Kit: 550140
- Manufacturer: ERA
- Engine Code: C 18 NZ
- Number of pins: 3
- Voltage [V]: 12
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: MAX
- Oxygen Sensor: Regulating Sensor
- Engine Code: C 18 NZ
- Construction Year to: 08.1995
- Pinge [V]: 12
- Pikkus (mm): 320
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 1
-
Kaal (kg): 0,
08 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV069
- Manufacturer: ESEN SKV
- Construction Year to: 08.1995
-
Oxygen Sensor: Regulating Sensor,
Unheated - Fitting Position: before catalytic converter
- Number of circuits: 1
- Overall Length [mm]: 422
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- Engine Code: C 18 NZ
- Construction Year to: 08.1995
-
Oxygen Sensor: Regulating Sensor,
Unheated - Number of circuits: 1
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Oxygen Sensor: Regulating Sensor,
Finger- type Sensor, Unheated - Cable Length [mm]: 320
- Manufacturer: DELPHI
-
Name: DE ES10966-
12B1
- Oxygen Sensor: Heated
-
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 1
- Cable Length [mm]: 410
- Weight [kg]: 0.083
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Oxygen Sensor: Regulating Sensor
- Number of circuits: 1
- Manufacturer: KAMOKA
- Oxygen Sensor: Heated
-
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 1
- Cable Length [mm]: 410
- Weight [kg]: 0.083
- Name: SW 40 91 7536
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Conductor Number: 1
- Length [mm]: 370
- Number of circuits: 1
- Cable Length [mm]: 370
- Oxygen Sensor: Unheated
- Manufacturer: MAGNETI MARELLI
- Construction Year to: 09.1995
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Length [mm]: 460
- Number of circuits: 1
- Manufacturer: VDO
-
Exhaust System: for pre-
catalytic converter - Thread Size: M18x1.5
- Cable Length [mm]: 300
- Number of pins: 1
- Manufacturer Restriction: DENSO
- Quality: OE
- Weight [g]: 74
- Gross Weight [g]: 118
- Manufacturer: DENSO
Oxygen Sensor: Regulating Sensor, Unheated, Finger-type Sensor, Switching-type Oxygen Sensor
- Sensor Type: Piezoelectric Sensor
- Number of pins: 3
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: MEY
- Construction Year to: 08.1995
- Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY
- Construction Year to: 08.1995
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Number of circuits: 1
-
Recommended change interval [km]: 80,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Number of pins: 3
- Pressure from [kPA]: 15
- Pressure to [kPA]: 100
- Manufacturer: FAE
- Engine Code: C 18 NZ
- Operating Mode: pneumatic
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: PIE
- Engine Code: C 18 NZ
- Pressure from [kPA]: 15
- Pressure to [kPA]: 102
- Output Voltage, from [V]: 0.261
- Output Voltage, up to [V]: 4.958
- Manufacturer: FACET
- Engine Code: C 18 NZ
- Pressure from [kPA]: 15
- Pressure to [kPA]: 102
- Output Voltage, from [V]: 0.261
- Output Voltage, up to [V]: 4.958
- Manufacturer: EPS
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks