• Fitting Position: Lower, Cylinder Head
• Number of pins: 2

• Number of pins: 2
• Manufacturer: ERA

• Engine Code: D 20 DTH
• Fitting Position: Lower
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: EP 1.830.379
• Manufacturer: EPS

• Fabrication Number: ECT-PL-004
• Manufacturer: NTY
• Name: NTY ECT-PL-004

• Fitting Position: Lower
• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 25186240
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Operating Mode: Manual (foot operated)
• Number of pins: 3
• Fabrication Number: EPH-PL-002
• Manufacturer: NTY

• Length [mm]: 28
• Connector Shape: oval
• Weight [kg]: 0.032
• Thread Size: 12 mm
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Number of connectors: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: 9 mm
• Manufacturer: VERNET

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-PL-033

• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168781

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• for OE number: 12 47 134
• Name: ANDUR, VŽNTVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Connector Shape: oval
• Rated Voltage [V]: 12
• Manufacturer: ERA

• Number of pins: 3
• Name: DE DPS00049-12B1
• Manufacturer: DELPHI

• Exhaust System: before soot particulate filter
• Manufacturer: NRF

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Solid rubber
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Metal
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Frequency Range [MHz]: 433
• Valve colour: black
• Mounting Type: Plugged
• Supplementary Article/Info 2: with screw, with valves
• Permissible maximum speed [km/h]: 210
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: SKF

• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Colour: Aluminium
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Colour: Orange
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: silver
• Installation Information: TPMS sensor needs to be programmed before use.
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HUF
• Additional information: UVS4050
• Lisainfo: UVS4050

• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Colour: Orange
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Valve colour: black
• Installation Information: TPMS sensor needs to be programmed before use.
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HUF

• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Housing Colour: Orange
• Test Mark: CE, FCC, IC
• Weight [kg]: 0.05
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Name: RATTAANDUR, REHVIROHU KONTROLLSšSTEEM
• Manufacturer: HUF
• Additional information: UVS4040
• Lisainfo: UVS4040

General Information: also available with black metal valve UVS4042 or with titani um metal valve UVS4043

• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Recommended change interval [years]: 5
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Required quantity: 1
• Fitting Position: before soot particulate filter
• Connector Shape: oval
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 50
• Cable Length [mm]: 296
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• Emission Standard: Euro 6
• Supplementary Article/Info 2: without connection line
• Number of connectors: 2
• Number of pins: 3
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Programmed:
• Tightening Torque [Nm]: 4
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: "Fully programmed and ready for installation! No need for complex sensor programming. Significantly saves time in workshops! Calibration by the corresponding vehicle manufacturers is al l it takes.

• Fitting Position: before exhaust turbocharger
• Manufacturer: BOSCH

• Engine Code: D 20 DTH
• Operating Mode: Electric
• Voltage [V]: 5
• Conductor Number: 2
• Cable Length [mm]: 229
• Thread Size: M14 x 1,5
• Fitting Position: before catalytic converter
• Manufacturer: PIERBURG

• Fitting Position: before catalytic converter
• Number of pins: 2
• Cable Length [mm]: 230
• Sensor Type: PTC
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Vehicle Identification Number (VIN) to: J1034315
• Model Year from: 2018
• Glass: with rain/light sensor
• Supplementary Article/Info 2: with cable
• Mounting Type: Clipped
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PW011178891
• Manufacturer: HELLA

Vehicle Equipment: for vehicles with automatic low beam switch, for vehicles without lane assist Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Vehicle Identification Number (VIN) to: J1034315
• Model Year from: 2018
• Glass: with rain/light sensor
• Supplementary Article/Info 2: with cable
• Mounting Type: Clipped
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PW011178901
• Manufacturer: HELLA

Vehicle Equipment: for vehicles with automatic low beam switch, for vehicles with lane assist Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Manufacturer: BOSCH

• Vehicle Identification Number (VIN) from: J1034316
• Mounting Type: Clipped
• Supplementary Article/Info 2: with cable
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PW011178711

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Vehicle Equipment: for vehicles with automatic daylight switch
• Vehicle Identification Number (VIN) from: J1034316
• Mounting Type: Clipped
• Supplementary Article/Info 2: with cable
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PW011178701

Brief Information: *** HELLA Electronics OE competence for over 60 years.