• Seerianumber: ECT-PL-009
• Manufacturer: NTY
• Name: NTY ECT-PL-009

• Pistikkontaktide arv: 2
• Installatsiooni pool: Silindripea

• Engine Code: B 16 DTE
• Fitting Position: Lower
• Keermemõõt: M12x1,5
• Võtmekaugus: 19
• Name: EP 1.830.379
• Manufacturer: EPS

• Seerianumber: ECT-PL-004
• Manufacturer: NTY

• Fitting Position: Lower
• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 25186240
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Rakendustüüp: manuaalne(jalateostus)
• Pistikkontaktide arv: 3
• Seerianumber: EPH-PL-002
• Manufacturer: NTY

• Length [mm]: 28
• Connector Shape: oval
• Weight [kg]: 0.032
• Thread Size: 12 mm
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Number of connectors: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Supplementary Article/Info 2: with seal ring, with screw
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Seerianumber: HCA-PL-033

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring, with screw
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 3
• Weight [kg]: 0.036
• Name: SW 33 10 3241
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168821

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: B16DTE, D16DTE
• Required quantity: 1
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Anduritüüp: Hallsensor
• Korpusevärv: must
• Manufacturer: BREMI

• Number of connectors: 3
• Weight [kg]: 0.036
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles without collision warning system
• pikkus üle kõige (mm): 1 135
• Pikkus (mm): 37
• Anduritüüp: Aktiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 1 055
• paaris tootenumbrid: 32119
• Kaal (kg): 0,07
• Manufacturer: A.B.S.

• Construction Year from: 04.2017
• Construction Year to: 03.2020
• Engine Code: B16DTE,D16DTE
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.021
• Name: VA 366500
• Manufacturer: VALEO

• Engine Code: B 16 DTE
• Suspension: for vehicles without FlexRide suspension
• Length [mm]: 790
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 740
• Weight [kg]: 0.06
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 3
• Manufacturer: ERA

• Sõidukivarustus: Rehvirõhu kontrollsüsteemiga sõidukite jaoks
• Sagedusala [MHz]: 433
• Korpusevärv: oranž
• Kontrolltähistus: CE, FCC, IC
• Kaal (kg): 0,05
• Montaaživiis: kruvitud
• Manufacturer: BH SENS HUF

• Exhaust System: before soot particulate filter
• Engine Code: D 16 DTN
• Pressure [Pa] from: 600
• Pressure [Pa] to: 100,300
• Manufacturer: NRF

• Exhaust System: before soot particulate filter
• Emission Standard: Euro 6
• Engine Code: B 16 DTE, D 16 DTE
• for RPO code: NE4
• Manufacturer: NRF

• Engine Code: D 16 DTN, B 16 DTE
• Emission Standard: Euro 6
• Housing Colour: black
• Number of pins: 3
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sagedusala [MHz]: 433
• Korpusevärv: hall
• Kontrolltähistus: CE, FCC, IC
• Kaal (kg): 0,05
• Montaaživiis: kruvitud
• Ventiili värv: hõbedane
• Montaažiinfo: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Sagedusala [MHz]: 433
• Korpusevärv: must
• Kontrolltähistus: CE, FCC, IC
• Kaal (kg): 0,05
• Montaaživiis: kruvitud
• Ventiili värv: hõbedane
• Montaažiinfo: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Sagedusala [MHz]: 433
• Korpusevärv: titaan
• Kontrolltähistus: CE, FCC, IC
• Kaal (kg): 0,05
• Montaaživiis: kruvitud
• Ventiili värv: hõbedane
• Montaažiinfo: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Seerianumber: EPP-PL-023
• Manufacturer: NTY

• Seerianumber: EGT-PL-039
• Kaablipikkus (mm): 485
• Manufacturer: NTY

• Engine Code: D 16 DTN
• Number of pins: 3
• Opening pressure [kPa]: 100
• Manufacturer: DELPHI

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Solid rubber
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Sõidukivarustus: Rehvirõhu kontrollsüsteemiga sõidukite jaoks
• Sagedusala [MHz]: 433
• Värv: oranž
• Kontrolltähistus: CE, FCC, IC
• Kaal (kg): 0,05
• Montaaživiis: kruvitud
• Ventiili värv: titaan
• Montaažiinfo: TPMS sensor needs to be programmed before use.
• Manufacturer: BH SENS HUF

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Metal
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Frequency Range [MHz]: 433
• Valve colour: black
• Mounting Type: Plugged
• Supplementary Article/Info 2: with screw, with valves
• Permissible maximum speed [km/h]: 210
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: SKF

• Unprogrammed:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Frequency Range [MHz]: 433
• Tightening Torque [Nm]: 4
• Valve stem material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Colour: Aluminium
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

• Number of connectors: 3
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Sõidukivarustus: Rehvirõhu kontrollsüsteemiga sõidukite jaoks
• Sagedusala [MHz]: 433
• Värv: oranž
• Kontrolltähistus: CE, FCC, IC
• Kaal (kg): 0,05
• Montaaživiis: kruvitud
• Ventiili värv: hõbedane
• Montaažiinfo: TPMS sensor needs to be programmed before use.
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HUF
• Additional information: UVS4050
• Lisainfo: UVS4050

• Sõidukivarustus: Rehvirõhu kontrollsüsteemiga sõidukite jaoks
• Sagedusala [MHz]: 433
• Värv: oranž
• Kontrolltähistus: CE, FCC, IC
• Kaal (kg): 0,05
• Montaaživiis: kruvitud
• Ventiili värv: must
• Montaažiinfo: TPMS sensor needs to be programmed before use.
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HUF

• Emission Standard: Euro 6
• Quantity: 1
• Housing Type: without housing
• Name: Ohumassimootja
• Manufacturer: MAX

• Engine Code: D 16 DTE, B 16 DTE
• Length [mm]: 44
• Number of connectors: 3
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring, with screw
• Name: Andur,Nukkvollipositsioon
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Garantii: 3 aastat garantii
• Kaal (kg): 0,09
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV353

• Engine Code: B 16 DTE, D 16 DTE
• Manufacturer: BOSCH

• Sõidukivarustus: Rehvirõhu kontrollsüsteemiga sõidukite jaoks
• Sagedusala [MHz]: 433
• Soovituslik vahetusintervall (aastad): 5
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: B 16 DTE, D 16 DTE, D 16 DTN
• Weight [kg]: 0.043
• Number of mounting bores: 1
• Number of circuits: 2
• Connector Shape: angular
• for OE number: 55 598 778
• Number of pins: 3
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: D 16 DTN
• Emission Standard: Euro 6
• Piirangutega toode/piirangu info 2: ilma ühendusjuhtmestikuta
• Ühenduste arv: 2
• Pistikkontaktide arv: 3
• Manufacturer: METZGER

Väljalaskesüsteem: Sõidukile tehases sisseehitatud tahma-/partiklifiltriga

• Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated
• Emission Standard: Euro 6
• Fitting Position: before catalytic converter
• Quantity: 1
• Engine Code: B 16 DTE, D 16 DTE
• for POC: NE4
• Cable Length [mm]: 590
• Manufacturer: DELPHI
• Name: DE ES21194-12B1

• Programmed:
• Tightening Torque [Nm]: 4
• Assy./disassy. by qualified personnel required!:
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HEL

Brief Information: "Fully programmed and ready for installation! No need for complex sensor programming. Significantly saves time in workshops! Calibration by the corresponding vehicle manufacturers is al l it takes.

• Vehicle Identification Number (VIN) to: J1034315
• Model Year from: 2018
• Glass: with rain/light sensor
• Supplementary Article/Info 2: with cable
• Mounting Type: Clipped
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PW011178891
• Manufacturer: HELLA

Vehicle Equipment: for vehicles with automatic low beam switch, for vehicles without lane assist Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: after catalytic converter
• Number of pins: 2
• Cable Length [mm]: 295
• Sensor Type: PTC
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Fitting Position: before catalytic converter
• Number of pins: 2
• Cable Length [mm]: 495
• Sensor Type: PTC
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Fitting Position: after soot particulate filter
• Engine Code: D 16 DTN
• Number of pins: 2
• Cable Length [mm]: 280
• Sensor Type: PTC
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Emission Standard: Euro 6
• Quantity: 1
• for POC: NE4
• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: Ohumassimootja
• Manufacturer: DLP

• Engine Code: B 16 DTE, D 16 DTE
• Fitting Position: Front
• Manufacturer: BOSCH

• Engine Code: B 16 DTE, D 16 DTE
• Fitting Position: Centre
• Name: Andur, heitgaasitemperatuur
• Manufacturer: BOS

• for POC: NE4
• Engine Code: B16DTE
• Required quantity: 1
• Pistikkontaktide arv: 8
• Pinge [V]: 12
• Korpusetüüp: ilma korpuseta
• Manufacturer: BREMI

• Vehicle Identification Number (VIN) to: J1034315
• Model Year from: 2018
• Glass: with rain/light sensor
• Supplementary Article/Info 2: with cable
• Mounting Type: Clipped
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PW011178901
• Manufacturer: HELLA

Vehicle Equipment: for vehicles with automatic low beam switch, for vehicles with lane assist Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: B 16 DTE, D 16 DTE
• for OE number: 22752508
• Recommended additional repairs: Air Filter
• Name: Ohumassimootja
• Manufacturer: BOS

• Vehicle Identification Number (VIN) from: J1034316
• Mounting Type: Clipped
• Supplementary Article/Info 2: with cable
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Vehicle Equipment: for vehicles with automatic daylight switch
• Vehicle Identification Number (VIN) from: J1034316
• Mounting Type: Clipped
• Supplementary Article/Info 2: with cable
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PW011178701

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Pistikkontaktide arv: 6
• Värv: must
• vasak/paremroolimine: vasakpoolse roolimise jaoks
• Käigukasti liik: Automaatkäigukast
• Manufacturer: METZGER

• General Information: Sold in Hitachi brand: printing and packaging
• Manufacturer: HITACHI

• Required quantity: 1
• Fitting Position: before catalytic converter
• Engine Code: B 16 DTE, D 16 DTE, D 16 DTN
• Supplementary Article/Supplementary Info: with synthetic grease