Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Vehicle Identification Number (VIN) from: K1000099
- Construction Year to: 08.1993
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right - Brake System: ATE
- Length [mm]: 660
- Engine Code: C 20 NE
-
Thread Size: 1/
8- 27NPT - Spanner Size: 13
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
for article number: 1.880.288, 1.880.343, 1.880.344, 1.880.346, 1.880.348
- Engine Code: C 20 NE
- Number of pins: 1
-
Thread Size: 1/
8x27NPT - Weight [kg]: 0.021
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Keermemõõt: M12x1.5
- Võtmekaugus: 19
- Manufacturer: FAST
- Engine Code: C 20 NE
- Sensor Type: NTC Sensor
-
Thread Size: 1/
8"- 27 NPT - Spanner Size: 13
- Number of pins: 1
- Thread Type: with tapered thread
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: rectangular
- Number of pins: 2
- Spanner Size: 19
- Thread Size: M12x1.5
- for OE number: 195321101000
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: round
- Number of pins: 1
- Spanner Size: 12
-
Thread Size: 1/
8 NPT - for OE number: 3439088
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
-
Thread Size: M12 x 1,
5 - Spanner Size: 19
- Number of pins: 2
- Connector Shape: rectangular
- Manufacturer: ERA
- Cable Length [mm]: 970
- Sensor Type: Passive sensor
- for OE number: 93232413
- Manufacturer: KAMOKA
- Operating voltage [V]: 12
- Sensor Type: Slider
- Supplementary Article/Info 2: without cable
- Number of pins: 3
- Manufacturer: JP GROUP
- Lisainfo: Switch for throttle valve
- Additional information: Switch for throttle valve
- Engine Code: C 20 NE
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
for article number: 1.880.113,
1.880.114, 1.880.149, 1.880.151 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Engine Code: C 20 NE
- Mounting Type: Bolted
- Voltage [V]: 12
-
Resistor [Ohm]: 2,
080, 302 - Supplementary Article/Supplementary Info: with seal
- Temperature range from [°C]: 25
- Temperature range to [°C]: 80
-
Thread Size: M12x1,
5 - Colour: blue
- Spanner Size: 19
- Sensor Type: NTC Sensor
- Number of pins: 2
- Corresponds to the original part in colour: blue
- Manufacturer Restriction: Bosch
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Vehicle Identification Number (VIN) from: L1019855
- Operating Mode: Mechanical
-
Name: ANDUR,
DROSSELKLAPIASEND - Manufacturer: MAX
- Construction Year from: 01.1990
- Vehicle Identification Number (VIN) from: L1019855
- Number of pins: 3
- Operating Mode: Mechanical
- Manufacturer: DELPHI
-
Name: DE SS10992-
12B1
- Engine Code: C 20 NE
- Sensor Type: NTC Sensor
-
Thread Size: M12 x 1,
5 - Spanner Size: 19
- Colour: blue
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Construction Year to: 03.1994
- Manufacturer: BOSCH
- Construction Year to: 03.1994
- Sensor Type: Passive sensor
- Number of pins: 3
- Voltage [V]: 12
-
Name: ANDUR,
VNTVOLL - Manufacturer: MAX
- Sensor Type: Inductive Sensor
-
Supplementary Article/Info 2: with seal ring,
with protection hose - Cable Length [mm]: 970
- Number of pins: 3
-
Name: ANDUR,
VNTVOLL - Manufacturer: MEY
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: with seal ring
- Cable Length [mm]: 975
- Number of pins: 3
-
Name: ANDUR,
VNTVOLL - Manufacturer: MEY
- Construction Year to: 03.1994
- Vehicle Identification Number (VIN) from: L1019855
-
Name: ANDUR,
DROSSELKLAPIASEND - Manufacturer: BOS
- Engine Code: C 20 NE
- Length [mm]: 990
- Name: EP 1.953.073
- Manufacturer: EPS
- Engine Code: C 20 NE
-
Lambda Sensor: Regulating Probe,
Heated - Number of circuits: 3
-
Length [mm]: 1,
350 - Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lambda Sensor: Regulating Probe,
Heated - Fitting Position: Exhaust Manifold
- Number of pins: 3
- Cable Length [mm]: 230
- for article number: 81014E
- Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 3
- Weight [g]: 95
- Gross Weight [g]: 144
- Manufacturer: DENSO
- Name: Lambda sensor
- Quality class: Q
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"
-
for OE number: 855307,
855338 -
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
-
Cable Length [mm]: 1,
220 - Number of pins: 3
- Weight [g]: 133
- Gross Weight [g]: 163
- Manufacturer: DENSO
-
Name: DN DOX-
1500
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
- Construction Year to: 03.1994
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 3
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks