• Number of pins: 1
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 1 pin
• Additional information: Temperature sensor for cooling system, 1 pin

• Number of pins: 2
• Colour: blue
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Length [mm]: 36
• Housing Colour: black
• Spanner Size: 13
• Manufacturer: KAMOKA

• Length [mm]: 37
• Thread Size: M10x1,0
• Spanner Size: 13
• Number of pins: 1
• Manufacturer: DELLO AUTOMEGA

• Fabrication Number: ECP-AR-013
• Manufacturer: NTY

• Colour Coding: white
• Sensor Type: NTC Sensor
• Thread Size: 1/8" x 27 NPT
• Number of pins: 1
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: C 24 NE
• Thread Size: 1/8-27NPT
• Spanner Size: 13
• Name: EP 1.830.005
• Manufacturer: EPS

for article number: 1.880.288, 1.880.343, 1.880.344, 1.880.346, 1.880.348

• Connector Shape: rectangular
• Supplementary Article/Info 2: with seal ring
• Colour Coding: blue
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 2
• Switch Point [°C]: 140
• Sensor Type: NTC Sensor
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 36.7
• Outer Diameter [mm]: 8
• External Thread Size: M10 x 1
• Thread Length [mm]: 9.7
• Spanner Size: 13
• Number of connectors: 1
• Material: Brass
• Switch Point [°C]: 120
• Weight [kg]: 0.014
• Name: SW 40 23 0003
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M12x1.5
• Spanner Size: 19
• Manufacturer: FAST

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195321101000
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

Manufacturer: DELLO AUTOMEGA

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 1,014, 146
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: 1/8-27 NPT
• Sensor Type: NTC Sensor
• Number of pins: 1
• Housing Colour: black
• Number of mounting holes at thermostat housing: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107161
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Length [mm]: 50.7
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 11
• Spanner Size: 19
• Number of connectors: 2
• Colour: blue
• Colour Coding: blue
• Switch Point [°C]: 20
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: C 24 NE
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.113, 1.880.114, 1.880.149, 1.880.151
• Name: EP 1.830.128
• Manufacturer: EPS

Manufacturer: DELLO AUTOMEGA

• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI

• Length [mm]: 50.7
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 11
• Spanner Size: 19
• Number of connectors: 2
• Colour: blue
• Colour Coding: blue
• Switch Point [°C]: 20
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 40 91 7695
• Lisainfo: 40 91 7695 SWA
• Additional information: 40 91 7695 SWA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: C 24 NE
• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 302
• Supplementary Article/Supplementary Info: with seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Thread Size: M12x1,5
• Colour: blue
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: blue
• Manufacturer Restriction: Bosch
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Operating Mode: Mechanical
• Manufacturer: DELPHI
• Name: DE SS10992-12B1

• Construction Year to: 08.1995
• Manufacturer: BOSCH

• Number of connectors: 3
• Manufacturer: VERNET

• Mounting Type: Bolted
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Number of mounting bores: 1
• Length [mm]: 1,440
• Supplementary Article/Info 2: with cable
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358191171
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Manufacturer: MAGNETI MARELLI

• Resistor [Ohm]: 900
• Cable Length [mm]: 1,335
• Sensor Type: Inductive Sensor
• Number of connectors: 3
• Rated Voltage [V]: 12
• Manufacturer: JP GROUP
• Lisainfo: Sensor, crankshaft pulse
• Additional information: Sensor, crankshaft pulse

• Number of circuits: 3
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Construction Year to: 04.1995
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 550
• Weight [kg]: 0.12
• Manufacturer: VALEO
• Name: VA 254028

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Operating Mode: Mechanical
• Manufacturer: MAXGEAR

• Construction Year to: 08.1995
• Manufacturer: BOSCH
• Name: BS 0280122001

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 3
• Weight [kg]: 0.08
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV903

• Construction Year to: 08.1995
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: Exhaust Manifold
• Number of pins: 3
• Cable Length [mm]: 230
• for article number: 81014E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Engine Code: C 24 NE
• Length [mm]: 1,360
• Manufacturer: EPS

• Construction Year to: 02.1995
• Supplementary Article/Info 2: with potentiometer
• Manufacturer: METZGER

• Thread Size: M14x1,5
• Measuring Range to [bar]: 0.4
• Manufacturer: FAE

• Thread Size: M14x1.5
• Switch Pressure [bar]: 0.6
• Cut-off Pressure [bar]: 5
• Manufacturer: VERNET

• Construction Year to: 08.1995
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Construction Year to: 08.1995
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Cable Length [mm]: 885
• Manufacturer: DELPHI

• Construction Year to: 08.1995
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Conductor Number: 5
• Connector Shape: D Shape
• Overall Length [mm]: 360
• Number of pins: 5
• Recommended change interval [km]: 250,000
• Weight [kg]: 0.106
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: round
• Number of pins: 1
• Spanner Size: 12
• Thread Size: 1/8 NPT
• for OE number: 3439088