• Filter type: Spin-on Filter
• Height [mm]: 79
• Outer Diameter [mm]: 76
• Inner Diameter 1 [mm]: 62
• Inner Diameter 2 [mm]: 71
• Manufacturer: JP GROUP
• Lisainfo: Oil filter
• Additional information: Oil filter

• Fitting Position: Driver side, Passenger Side
• Wiper blade type: Flat wiper blade
• Quantity: 1
• Length [mm]: 475
• Length [inch]: 19
• Matching Adapter: U
• Adapter enclosed: M+A+B
• Blade material: SBR (Styrene butadiene rubber)
• Technical Information: Product may differ from images
• Name: KLAASIPUHASTAJA KUMM
• Manufacturer: VAL

Additional information: Valeo raamita klaasipuhastaja, multiconnection 475mm. Lisainfo: Valeo raamita klaasipuhastaja, multiconnection 475mm.

• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 1.5
• Material: Copper
• Shape: A Shape
• DIN/ISO: 7603
• Alternative Repair Kit: 017.736, 505.550, 505.540
• Manufacturer: ELRING
• Lisainfo: 115.100 ELR
• Additional information: 115.100 ELR

• Engine Code: X 20 SE
• Material: Copper
• Thickness [mm]: 1.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Shape: A Shape
• Name: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Manufacturer: REI
• Lisainfo: 41-70089-00
• Additional information: 41-70089-00

• Oil Sump Material: Steel
• Material: Copper
• Inner Diameter [mm]: 14
• Thickness [mm]: 1.5
• Outer Diameter [mm]: 20
• Weight [kg]: 0.007
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: X 20 SE
• Oil Sump Material: Steel
• Thickness [mm]: 1.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• DIN/ISO: 7603 A/CU
• Material: Copper
• Weight [kg]: 0.002
• Observe service information:
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: X 20 SE
• Oil Sump Material: Steel
• Thickness [mm]: 1.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• DIN/ISO: 7603 A/CU
• Material: Copper
• Weight [kg]: 0.002
• Name: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Material: Copper
• Outer Diameter [mm]: 20
• Inner Diameter [mm]: 14
• Thickness [mm]: 1.5
• Shape: A Shape
• DIN/ISO: 7603
• Name: Rongastihend, oli „ravoolukruvi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: C 20 NE, X 20 SE
• Construction Year to: 12.1995
• Block Separation:
• Construction Year from: 01.1995
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 1.5
• Manufacturer: AJUSA

• Spark Plug: 1 - Earthed Electrode
• Supplementary Article/Info 2: Do not fit parts from different manufacturers!
• for OE number: 12 14 149
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: C 20 NE, X 20 SE
• Spark Plug: 1 - Earthed Electrode, with resistor
• Electrode Gap [mm]: 0.9
• Thread Size: M14 x 1.25
• Thread Length [mm]: 19
• Spanner Size: 16
• Technical Information: Nichel-Chromium with internal in branch
• Manufacturer: MAGNETI MARELLI

• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 1.5
• Shape: A Shape
• Material: Copper
• Alternatively:
• Name: Rongastihend, oli „ravoolukruvi
• Manufacturer: FIS

• Engine Code: X 20 SE
• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Electrode Gap [mm]: 0.7
• Length [mm]: 126
• Height [mm]: 51
• Weight [kg]: 0.062
• Spark Plug: 1 - Earthed Electrode
• Version: VR7EC1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Spin-on Filter
• Article number of the recommended special tool: LS 7
• Inner Diameter 2 [mm]: 62
• Outer Diameter 2 [mm]: 71
• Height [mm]: 79
• Thread Size: M 18 X 1.5
• Outer Diameter [mm]: 76
• Name: OLIFILTER
• Manufacturer: MAX

• Spark Plug: Nickel Middle Electrode, 2 - Earthed Electrode
• Thread Length [mm]: 19
• Spanner Size: 16 mm
• for OE number: 9618494580
• Manufacturer: KAMOKA

• Engine Code: X 20 SE
• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Required quantity: 4
• Electrode Gap [mm]: 0.9
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 3
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Fitting Position: Front, Passenger Side, Driver side, both sides
• Length [mm]: 475
• Length [inch]: 19
• Wiper blade type: Bracket wiper blade without spoiler
• Name: KLAASIPUHASTAJA KUMM
• Manufacturer: MAX

• Filter type: Spin-on Filter
• Height [mm]: 79
• Outer Diameter [mm]: 76
• Internal Thread Size: M18 x 1,5
• Weight [kg]: 0.29
• Name: OLIFILTER
• Manufacturer: FEB
• Additional information: FE32122
• Lisainfo: FE32122

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Spin-on Filter
• Height [mm]: 79
• Outer Diameter [mm]: 77
• for OE number: MLS 000-530
• Manufacturer: KAMOKA FILTRY

• Filter type: Spin-on Filter
• Outer Diameter 1 [mm]: 76
• Inner Diameter 1 [mm]: 72
• Inner Diameter 2 [mm]: 63
• Thread Size: M18X1.5
• Height [mm]: 78
• Quantity Unit: Piece
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Spin-on Filter
• Height [mm]: 85
• Outer Diameter [mm]: 77
• for OE number: 93745067
• Manufacturer: KAMOKA FILTRY

• Filter type: Spin-on Filter
• Height [mm]: 80
• Outer Diameter [mm]: 77
• Internal Thread Size: M18 x 1,5
• Seal Diameter [mm]: 70
• Weight [kg]: 0.274
• Name: OLIFILTER
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 80
• Thread Size: M 18 x 1.5
• Outer Diameter [mm]: 76
• Packing Type: Box
• Filter type: Spin-on Filter
• Version: w/ Anti-Drain valve
• Packaging length [cm]: 7.8
• Packaging width [cm]: 7.8
• Packaging height [cm]: 9
• Sealing Ring Diameter from [mm]: 62
• Sealing Ring Diameter up to [mm]: 71
• Name: CH COF101102S
• Manufacturer: CHAMPION

• Filter type: Spin-on Filter
• Outer Diameter 1 [mm]: 76
• Inner Diameter 1 [mm]: 63
• Inner Diameter 2 [mm]: 72
• Thread Size: M18X1.5
• Height [mm]: 76
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Spin-on Filter
• Thread Size: M 18 x 1,5 mm
• Outer Diameter [mm]: 76
• Height [mm]: 85
• Supplementary Article/Supplementary Info: with seal
• Housing material: Sheet Steel
• Observe system fill quantity:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Height [mm]: 75
• Thread Size: M 18 X 1,5
• Outer Diameter [mm]: 76
• Outer Diameter 1 [mm]: 78
• Outer Diameter 2 [mm]: 71
• Inner Diameter 1 [mm]: 61
• Filter type: Spin-on Filter
• Manufacturer: SOFIMA

• Height [mm]: 79
• Thread Size: M18 X1.5
• Outer Diameter [mm]: 76
• Filter type: Spin-on Filter
• Outer Diameter 2 [mm]: 71
• Inner Diameter 2 [mm]: 62
• Manufacturer: DRIVE

• Engine Code: X 20 SE
• Fitting Position: both sides
• Length [inch]: 19
• Length [mm]: 480
• Wiper blade type: Bracket wiper blade
• Fastening Type: Hook fixing
• Weight [kg]: 0.11
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Alternator
• Engine Code: C 20 NE
• not for alternator charge current [A]: 90
• Length [mm]: 1,000
• Width [mm]: 10
• Lisainfo: Fan belt for alternator, 10x1000 mm
• Additional information: Fan belt for alternator, 10x1000 mm

• Filter type: Spin-on Filter
• Height [mm]: 92
• Thread Size: M18x1,5
• Outer Diameter [mm]: 78
• Name: Oil filter
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Engine Code: X 20 SE
• Height [mm]: 79
• Thread Size: M 18x1,5mm
• Filter type: Spin-on Filter
• Diameter [mm]: 76
• Weight [kg]: 0.27
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Spin-on Filter
• Height [mm]: 86.5
• Thread Size: M18x1.5-6H
• Outer Diameter [mm]: 76.5
• Inner Diameter 1 [mm]: 71
• Inner Diameter 2 [mm]: 62
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Fitting Position: both sides, Front
• Length [mm]: 475
• Length [inch]: 19
• Wiper blade type: Bracket wiper blade
• Quantity: 1
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: HE 9XW178878191
• Manufacturer: HELLA

• Fitting Position: Driver side, Passenger Side
• Quantity: 1
• Length [mm]: 475
• Length [inch]: 19
• Matching Adapter: U
• Technical Information: Product may differ from images
• Name: KLAASIPUHASTAJA KUMM
• Manufacturer: VAL

• Engine Code: X 20 SE
• Required quantity: 4
• Electrode Gap [mm]: 1
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 6
• Number of pins: 2
• Name: SššTEKššNAL
• Manufacturer: BOS

• Filter type: Spin-on Filter
• Outer Diameter [mm]: 78
• Thread Size: M18x1,5
• Height [mm]: 92
• Name: Oil filter
• Quality class: Q

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
ASTRA G NADWOZIE PEŁ
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
ASTRA G NADWOZIE PEŁ
(kvaliteediklass: PJ)"

• Filter type: Spin-on Filter
• Height [mm]: 86
• Thread Size: M18x1.5
• Outer Diameter [mm]: 76.5
• Inner Diameter 1 [mm]: 71
• Inner Diameter 2 [mm]: 62
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Driven Units: Alternator
• Engine Code: C 20 NE
• Alternator Charge Current [A]: 90
• Tensile Cord Material: Polyester
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Width [mm]: 10
• Length [mm]: 1,025
• Outer Length [mm]: 1,035
• Manufacturer: GATES
• Additional information: 6221MC GATES
• Lisainfo: 6221MC GATES

• Fitting Position: Rear
• Length [mm]: 280
• Length [inch]: 11
• Weight [g]: 60
• Name: TR EF280
• Manufacturer: TRICO

• Filter type: Spin-on Filter
• Diameter [mm]: 75
• Height [mm]: 86.5
• Thread Size: M18x1,5
• Diameter 2 [mm]: 71
• Seal Diameter [mm]: 61.7
• Tightening Torque [Nm]: 20
• Article number of the recommended special tool: OCS 1
• Net Weight [g]: 259
• Packaging length [cm]: 8
• Packaging width [cm]: 8
• Packaging height [cm]: 8.8
• Manufacturer: KNECHT
• Name: KN OC405/3

• Engine Code: X 20 SE
• Filter type: Spin-on Filter
• Height [mm]: 74
• Thread Size: M 18 x 1,5
• Outer Diameter [mm]: 76
• Seal Ring Outer Diameter: 72
• Gasket inner diameter: 61
• Quantity: 1
• Name: OLIFILTER
• Manufacturer: BOS

• Engine Code: C 20 NE
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 6
• Name: SššTEKššNAL
• Manufacturer: NGK
• Additional information: BKR5EK
• Lisainfo: BKR5EK

Spark Plug: Nickel Middle Electrode, 2 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector

• Filter type: Spin-on Filter
• Outer Diameter [mm]: 77
• Seal Diameter [mm]: 72
• Thread Size: M18x1,5
• Height [mm]: 86
• Manufacturer: HENGST FILTER

• Engine Code: C 20 NE
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 6
• Name: SššTEKššNAL
• Manufacturer: NGK

Spark Plug: Nickel Middle Electrode, 2 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector

• Required quantity: 4
• Electrode Gap [mm]: 1
• Connector type: M4/SAE
• Thread Size: M14x1.25
• Spanner Size: 16 mm
• Quality/ Grade: Nickel GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: RC10DMC
• Spark Position [mm]: 6.1
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 9
• Projection [mm]: 3.6
• Name: CH OE019/T10
• Manufacturer: CHAMPION

Spark Plug: 2 - Earthed Electrode, with gasket seat, Copper Centre Electrode

• Filter type: Air Recirculation Filter
• Shape: tetragonal
• Length [mm]: 254
• Width [mm]: 213
• Height [mm]: 55
• for OE number: 13 72 1 433 933
• Manufacturer: KAMOKA

• Filter type: Spin-on Filter
• Article number of the recommended special tool: LS 7
• Gasket inner diameter: 62
• Seal Ring Outer Diameter: 71
• Height [mm]: 79
• Thread Size: M18x1.5
• Outer Diameter [mm]: 76
• SVHC: No SVHC present!
• Name: OLIFILTER
• Manufacturer: MAN

• Driven Units: Power steering pump
• Engine Code: C 20 NE
• Tensile Cord Material: Polyester
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Width [mm]: 10
• Length [mm]: 788
• Outer Length [mm]: 798
• Angle [°]: 37
• Manufacturer: GATES

• Filter type: Air Recirculation Filter
• Shape: tetragonal
• Length [mm]: 254
• Width [mm]: 213
• Height [mm]: 57
• for OE number: 5025136
• Manufacturer: KAMOKA FILTRY

• Filter type: Filter Insert
• Length [mm]: 254
• Width [mm]: 212
• Height [mm]: 55
• Weight [kg]: 0.286
• Name: OHUFILTER
• Manufacturer: FEB
• Additional information: F11210
• Lisainfo: F11210

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Alternator
• Engine Code: C 20 NE
• not for alternator charge current [A]: 90
• Tensile Cord Material: Polyester
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Width [mm]: 10
• Length [mm]: 1,000
• Outer Length [mm]: 1,010
• Manufacturer: GATES

• Filter type: Filter Insert
• Length [mm]: 254
• Width [mm]: 212
• Height [mm]: 55
• Weight [kg]: 0.286
• Manufacturer: BLUE PRINT
• Additional information: ADG02207
• Lisainfo: ADG02207

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 4
• Electrode Gap [mm]: 1
• Connector type: SAE
• Thread Size: M14x1,25
• Spanner Size: 16 mm
• Spark Plug: 2 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Technical Information Number: 14 FR-8 LDUOX4
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Name: SššTEKššNAL
• Manufacturer: BERU

• Filter type: Filter Insert
• Height [mm]: 58
• Length [mm]: 255
• Width [mm]: 213.5
• Name: OHUFILTER
• Manufacturer: ALC

• Filter type: Filter Insert
• Shape: rectangular
• Frame Material: Foam
• Length [mm]: 250
• Width [mm]: 211
• Height [mm]: 57
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front, Passenger Side, Driver side
• Length [mm]: 475
• Wiper blade type: Flat wiper blade
• Length [inch]: 19
• Name: KLAASIPUHASTAJA KUMM
• Manufacturer: MAX

• Length [mm]: 254
• Width [mm]: 213
• Height [mm]: 57
• Filter type: Filter Insert
• Manufacturer: JAPKO

• Length [mm]: 255
• Width [mm]: 215
• Height [mm]: 57
• Packing Type: Box
• Filter type: Filter Insert
• Packaging length [cm]: 26.2
• Packaging width [cm]: 21.5
• Packaging height [cm]: 6.3
• Name: CH CAF100567P
• Manufacturer: CHAMPION

• Fitting Position: Front, Passenger Side, Driver side, both sides
• Length [mm]: 475
• Length [inch]: 19
• Wiper blade type: Flat wiper blade
• Name: Klaasipuhastaja kumm, universaal
• Manufacturer: MAX

• Fitting Position: Passenger Side
• Matching Adapter: U-hook
• Length [mm]: 480
• Length [inch]: 19
• Weight [g]: 115
• Wiper blade type: Bracket wiper blade
• Gross Weight [g]: 151
• Manufacturer: DENSO
• Name: DN DM-048

• Fitting Position: Front, Passenger Side, Driver side
• Wiper blade type: Hybrid Wiper Blade
• Length [inch]: 19
• Length [mm]: 475
• Name: Klaasipuhastaja kumm, universaal
• Manufacturer: MAX
• Lisainfo: 39-7475
• Additional information: 39-7475

• Length [mm]: 254
• Width [mm]: 213
• Height [mm]: 58
• Filter type: Filter Insert
• Manufacturer: DRIVE

• Fitting Position: both sides, Front
• Matching Adapter: 1
• Length [mm]: 475
• Length [inch]: 19
• Wiper blade type: Flat wiper blade
• Quantity: 1
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: HE 9XW358053191
• Manufacturer: HELLA

• Driven Units: Air conditioning compressor
• Engine Code: C 20 NE
• Tensile Cord Material: Polyester
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Width [mm]: 13
• Length [mm]: 1,000
• Outer Length [mm]: 1,015
• Manufacturer: GATES

• Filter type: Filter Insert
• Length [mm]: 254
• Width [mm]: 212
• Height [mm]: 57
• Name: Air filter
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Engine Code: X 20 SE
• Fitting Position: Driver side, Passenger Side
• Fastening Type: Hook fixing
• Block Separation:
• Length [inch]: 19
• Length [mm]: 480
• Wiper blade type: Flat wiper blade
• Weight [kg]: 0.1
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Length [mm]: 253
• Width [mm]: 212
• Height [mm]: 55.5
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Fitting Position: Passenger Side
• Length [mm]: 480
• Length [inch]: 19
• Fastening Type: Hook fixing
• Weight [g]: 94
• Name: TR NF480
• Manufacturer: TRICO

• Fitting Position: Front
• Quantity Unit: Kit
• Length 1 [mm]: 475
• Length 2 [mm]: 475
• Wiper blade type: Bracket wiper blade without spoiler
• Name: Klaasipuhastaja kumm
• Manufacturer: MAX

• Engine Code: X 20 SE
• Fuel Type: CNG/LPG
• Replace after km: 30,000
• Electrode Gap [mm]: 1.1
• External Thread [mm]: M14
• Spanner Size: 16 [mm]
• Number of pins: 1
• Thread Length [mm]: 19
• Thread Pitch [mm]: 1.25
• Weight [kg]: 0.045
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: X 20 SE
• Fuel Type: CNG/LPG
• Replace after km: 30,000
• Required quantity: 4
• Electrode Gap [mm]: 0.7
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 4
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Filter type: Filter Insert
• Length [mm]: 254
• Width [mm]: 212
• Height [mm]: 57
• SVHC: No SVHC present!
• Name: OHUFILTER
• Manufacturer: MAN

• Fitting Position: Driver side, Passenger Side
• Quantity: 1
• Length [mm]: 475
• Length [inch]: 19
• Matching Adapter: U
• General Information: Product may differ from images
• Manufacturer: VALEO

Wiper blade type: Bracket wiper blade, Wiper blade with optical wear warning

• Engine Code: X 20 SE
• Filter type: Filter Insert
• Length [mm]: 254
• Width [mm]: 212.5
• Height [mm]: 57
• Quantity: 1
• Manufacturer: BOSCH

• Engine Code: X 20 SE
• Fitting Position: both sides
• Length [inch]: 19
• Length [mm]: 480
• Wiper blade type: Hybrid Wiper Blade
• Fastening Type: Hook fixing
• Weight [kg]: 0.1
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Length [mm]: 254
• Width [mm]: 213
• Height [mm]: 57.3
• Seal Material: Foam/Rigid Foam
• Packaging length [cm]: 21.5
• Packaging height [cm]: 26
• Net Weight [g]: 292
• Packaging width [cm]: 6
• Manufacturer: FILTRY KNECHT / MAHLE

• Supplementary Article/Info 2: without pre-filter
• Filter type: Filter Insert
• Length [mm]: 254
• Width [mm]: 212
• Height [mm]: 57
• Name: Air filter
• Quality class: PJ

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
7 (E38), 10.94-11.01
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
7 (E38), 10.94-11.01
(kvaliteediklass: PJ)"

• Fitting Position: Front
• Quantity Unit: Kit
• Styling: with spoiler
• Length 1 [mm]: 475
• Length 2 [mm]: 475
• Wiper blade type: Bracket wiper blade with spoiler
• Name: Klaasipuhastaja kumm
• Manufacturer: MAX

• Filter type: Filter Insert
• Length [mm]: 254
• Width [mm]: 212
• Height [mm]: 58
• Manufacturer: HENGST FILTER

• Matching Adapter: 1
• Fitting Position: both sides
• Length [mm]: 475
• Length [inch]: 19
• Wiper blade type: Flat wiper blade
• Quantity: 1
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: HE 9XW358136191
• Manufacturer: HELLA

• Engine Code: X 20 SE
• Driven Units: Alternator
• Vehicle Equipment: for vehicles without air conditioning
• Number of ribs: 6
• Length [mm]: 1,715
• Name: SOONRIHM
• Manufacturer: BOS

• for OE number: 6PK2050
• Length [mm]: 2,050
• Number of ribs: 6
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Engine Code: X 20 SE
• Driven Units: Alternator
• Vehicle Equipment: for vehicles with air conditioning
• Number of ribs: 6
• Length [mm]: 2,050
• Name: SOONRIHM
• Manufacturer: BOS