• Fabrication Number: ECP-AR-013
• Manufacturer: NTY

• Engine Code: C 18 XEL
• Thread Size: 1/8-27NPT
• Spanner Size: 13
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.288, 1.880.343, 1.880.344, 1.880.346, 1.880.348

• Engine Code: X 18 XE
• Number of pins: 2
• Manufacturer: KAVO

• Engine Code: X 18 XE
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.100, 1.880.108, 1.880.141, 1.880.152, 1.880.153, 1.880.193

Manufacturer: DELLO AUTOMEGA

• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Number of pins: 2
• Thread Size: M 12x1,5
• Housing Colour: blue
• Manufacturer: FAE

• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 30
• Alternative Repair Kit: 550700
• Manufacturer: ERA

Manufacturer: DELLO AUTOMEGA

• Operating Mode: Mechanical
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: MAX

• Number of pins: 3
• Operating Mode: Mechanical
• Name: DE SS10992-12B1
• Manufacturer: DELPHI

• Engine Code: C 18 XEL
• Name: EP 1.994.009
• Manufacturer: EPS

• Engine Code: X 18 XE
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Length [mm]: 106
• Number of connectors: 3
• Colour: black
• Lisainfo: Sensor, camshaft position
• Additional information: Sensor, camshaft position

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Engine Code: X 18 XE
• Supplementary Article/Supplementary Info: with seal
• Voltage [V]: 12
• Resistor [Ohm]: 2,055, 327
• Number of pins: 2
• Housing Colour: blue
• Thread Size: M12x1,5
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Temperature range [°C]: 25, 80
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009309291
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead, 1303-86-2; Diboron trioxide Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: C 18 XEL
• Number of pins: 2
• Housing Colour: white
• Sensor Type: NTC Sensor
• Diameter [mm]: 20
• Manufacturer: FAE

• Alternatively:
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Weight [kg]: 0.024
• Alternative Repair Kit: 550144
• Manufacturer: ERA

• Number of pins: 3
• Connector Shape: oval
• Number of mounting bores: 1
• Supplementary Article/Info 2: with cable
• for OE number: 93171450
• Manufacturer: DELLO AUTOMEGA

• Voltage [V]: 12
• Manufacturer: FAE

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Connector Shape: rectangular
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Name: Andur,steimpulss
• Manufacturer: MD

• Engine Code: X 18 XE
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Pressure from [bar]: 0.1
• Pressure to [bar]: 1.17
• Colour: black
• Number of pins: 2
• Manufacturer: MEYLE

• Length [mm]: 615
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Supplementary Article/Info 2: with rubber bellow, with cable
• Connector Shape: oval
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: C18XEL
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 17SKV230
• Manufacturer: ESEN SKV

• Thread Size: M12x1,5
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Weight [kg]: 0.032
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: MAGNETI MARELLI

• Length [mm]: 515
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Length [mm]: 770
• Fitting Position: Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-PL-002
• Manufacturer: NTY
• Name: NTY ESL-PL-002

• Engine Code: C 18 XEL, X 18 XE
• Manufacturer: FAE

• Length [mm]: 360
• Alternatively:
• Number of pins: 3
• Alternative Repair Kit: 550201
• Manufacturer: ERA

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAG

• Construction Year from: 09.1994
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: BOS

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Housing Type: with housing
• Fabrication Number: EPP-PL-001

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: JAPKO

• Engine Code: C 18 XEL
• Name: EP 1.995.002
• Manufacturer: EPS

• Engine Code: C 18 XEL
• Length [mm]: 350
• Name: EP 1.957.050
• Manufacturer: EPS

• Cable Length [mm]: 350
• Number of pins: 3
• Housing Colour: black
• Connector Shape: rectangular
• Manufacturer: FAE

• Construction Year from: 08.1994
• Engine Code: C18XEL
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.05
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

Manufacturer: DELLO AUTOMEGA

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 4
• Weight [kg]: 0.3
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Number of pins: 4
• Housing Type: with housing
• Manufacturer: JP-GROUP
• Lisainfo: Air meter
• Additional information: Air meter

• Number of pins: 4
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: MAX

• Number of pins: 4
• Housing Type: with housing
• Housing material: Plastic
• Connector Shape: rectangular
• Supplementary Article/Info 2: with integrated grille
• Recommended additional repairs: Air Filter
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Housing Colour: black
• Sensor Type: Frequency Alternator Sensor
• Supplementary Article/Info 2: with cable
• Length [mm]: 350
• Manufacturer: FAE

• Engine Code: X18XE, C18XEL
• New Part:
• Used part return not required:
• Recommended additional repairs: Air Filter
• Weight [kg]: 0.237
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 4
• Lambda Sensor: Heated
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Operating Mode: Electric
• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Engine Code: C18XEL
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Length [mm]: 760
• Number of circuits: 4
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV501
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 770
• Number of circuits: 4
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV505
• Manufacturer: ESEN SKV

• Engine Code: C 18 XEL
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Length [mm]: 820
• Number of pins: 4
• Technical Information Number: Universal 77013
• Manufacturer: FAE

• Construction Year from: 08.1994
• Transmission Type: Manual Transmission
• Engine Code: C 18 XEL
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 720
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 4
• Weight [kg]: 0.15
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: X 18 XE, C 18 XEL
• Number of pins: 4
• Colour: black
• Manufacturer: VDO