Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Vehicle Identification Number (VIN) from: V8026700,
V2050480 - Quantity: 2
- Fitting Position: Front
- Diameter [mm]: 47
- Manufacturer: DELLO AUTOMEGA
- Quantity per packing unit: 5
- Fitting Position: Front Axle both sides
- Diameter [mm]: 47
- Height [mm]: 33
- Material: Sheet Steel
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Rim Hole Number: 4
-
Fabrication Number: KLT-
PL- 001- Z - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle both sides
- Diameter [mm]: 47
- Height [mm]: 33
- Material: Steel
-
Name: Kaitsekaas,
rattakese - Manufacturer: MAX
- Fitting Position: Front Axle both sides
- Diameter [mm]: 47
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Quantity: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: DELLO AUTOMEGA
Suspension: for vehicles without bad road version, for vehicles with bad road version
-
Transmission Type: Automatic Transmission,
Manual Transmission -
Vehicle Identification Number (VIN) to: NE299999,
P5077914 - Block Separation:
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Info 2: without wheel bearing
- Number of Teeth: 22
- Rim Hole Number: 4
- Manufacturer: JP GROUP
-
Lisainfo: Wheel hub,
front -
Additional information: Wheel hub,
front
Vehicle Identification Number (VIN) from: R2000001, R3000001, R4000001, R5000001, R6000001, R8000001
- Fitting Position: Front Axle
- Supplementary Article/Info 2: without bearing
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 120
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Manufacturer: OYODO
-
Transmission Type: Automatic Transmission,
Manual Transmission - Block Separation:
-
Vehicle Identification Number (VIN) to: NE299999,
P5077914 -
Fitting Position: Front Axle Left,
Front Axle Right - Rim Hole Number: 4
- Number of Teeth: 22
- Bolt Hole Circle Ø [mm]: 100
- Outer Diameter [mm]: 120
- Centering Diameter [mm]: 34
- Quantity per axle: 2
- Manufacturer: TOPRAN
Vehicle Identification Number (VIN) from: R20000001, R3000001, R4000001, R5000001, R6000001, R8000001 General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Inner Diameter 1 [mm]: 22
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
-
Vehicle Identification Number (VIN) to: P5077914,
NE299999 - Block Separation:
-
Transmission Type: Manual Transmission,
Automatic Transmission -
Supplementary Article/Supplementary Info: without fastening/
mounting material - Supplementary Article/Info 2: without wheel bearing
- Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 100
- Rim Hole Number: 4
-
Fitting Position: Front Axle Left,
Front Axle Right - Name: RATTARUMM
- Manufacturer: MAX
Vehicle Identification Number (VIN) from: R2000001, R3000001, R4000001, R5000001, R6000001, R8000001
- Weight [kg]: 1.4
- Fitting Position: Front Axle both sides
- Rim Hole Number: 4
- Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 100
- Manufacturer: IJS GROUP
-
Transmission Type: Automatic Transmission,
Manual Transmission -
Vehicle Identification Number (VIN) to: P5077914,
NE299999 - Block Separation:
- Fitting Position: Front Axle
- Supplementary Article/Info 2: without wheel bearing
- Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 100
- Rim Hole Number: 4
- Diameter [mm]: 34
- Number of Teeth: 22
- Name: RATTARUMM
- Manufacturer: MEY
Vehicle Identification Number (VIN) from: R2000001, R3000001, R4000001, R5000001, R6000001, R8000001
- for OE number: 03 26 197
- Fitting Position: Front Axle
- Weight [kg]: 1.398
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Height [mm]: 80.7
- Weight [kg]: 1.59
- Drum diameter [mm]: 39
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 120
- Number of Holes: 4
- Wheel Hub Diameter [mm]: 56.5
- Number of Teeth: 33
- Manufacturer: METALCAUCHO
- Width [mm]: 78
- Inner Diameter [mm]: 23
-
Outer Diameter [mm]: 120,
34 - Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 4
- Fitting Position: Front Axle
- Weight [kg]: 1.336
- Supplementary Article/Info 2: without wheel bearing
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 81
- Inner Diameter [mm]: 24.5
-
Outer Diameter [mm]: 120,
39 - Bolt Hole Circle Ø [mm]: 100
- Number of Teeth: 22
- Number of Holes: 4
- Fitting Position: Front Axle
- Weight [kg]: 1.476
- Supplementary Article/Info 2: without wheel bearing
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Rim Hole Number: 4
- Braking/Drive Dynamics: for vehicles without ABS
-
Fitting Position: Front Axle Left,
Front Axle Right - Supplementary Article/Info 2: with wheel bearing
- Manufacturer: JP GROUP
-
Lisainfo: Wheel hub,
rear -
Additional information: Wheel hub,
rear
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Supplementary Article/Supplementary Info: with fastening/
mounting material - Supplementary Article/Info 2: with wheel bearing
- Rim Hole Number: 4
- Braking/Drive Dynamics: for vehicles with ABS
- Manufacturer: JP GROUP
-
Lisainfo: Wheel hub,
rear -
Additional information: Wheel hub,
rear
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 136
- Inner Diameter [mm]: 56
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Braking/Drive Dynamics: for vehicles without ABS
- Outer Diameter 1 [mm]: 136
- Height 1 [mm]: 144
- Rim Hole Number: 4
- Thread Size: M12 x 1.5
- Bolt Hole Circle Ø [mm]: 100
- Outer Diameter 2 [mm]: 60
- Number of flange connections: 4
- Weight [kg]: 3.38
- Manufacturer: A.B.S.
- Width [mm]: 70
- Inner Diameter [mm]: 30
-
Outer Diameter [mm]: 136,
56.5 - Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 4
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 3.35
- Name: SW 40 90 2843
- Manufacturer: SWAG
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated ABS sensor General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Braking/Drive Dynamics: for vehicles with ABS
- Vehicle Identification Number (VIN) from: S2578574
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Quantity per axle: 2
- Rim Hole Number: 4
- Outer Diameter [mm]: 136
- Number of pins: 2
- Connector Shape: oval
-
Fastening Type: Four-
point attachment - Bolt Hole Circle Ø [mm]: 100
- Manufacturer: TOPRAN
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with nut, with integrated wheel speed sensor, with studs General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Rim Hole Number: 4
- Braking/Drive Dynamics: for vehicles without ABS
- Width [mm]: 107.5
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 136
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 4
- Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 3.152
- Supplementary Article/Supplementary Info: with nuts
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Weight [kg]: 3.492
- Number of Teeth, ABS ring: 29
- Supplementary Article/Info 2: with ABS sensor ring
- Packaging length [cm]: 15
- Packaging width [cm]: 13.8
- Packaging height [cm]: 13.8
- Manufacturer: FEBEST
- Fitting Position: Rear Axle
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Inner Diameter [mm]: 56
- Outer Diameter [mm]: 136
- Bolt Hole Circle Ø [mm]: 100
- Number of Teeth, ABS ring: 48
- Rim Hole Number: 4
-
Fastening Type: Four-
point attachment - Bearing Type: Ball Bearing
- Name: RATTARUMM
- Manufacturer: MEY
Supplementary Article/Info 2: with integrated ABS sensor, with integrated wheel bearing General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Braking/Drive Dynamics: for vehicles with ABS
- Outer Diameter 1 [mm]: 136
- Height 1 [mm]: 151
- Rim Hole Number: 4
- Thread Size: M12 x 1.5
- Bolt Hole Circle Ø [mm]: 100
- Outer Diameter 2 [mm]: 60
- Number of flange connections: 4
- Weight [kg]: 3.55
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
Supplementary Article/Info 2: with integrated wheel bearing, with integrated ABS sensor
- Braking/Drive Dynamics: for vehicles without ABS
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Quantity per axle: 2
- Rim Hole Number: 4
- Outer Diameter [mm]: 136
-
Fastening Type: Four-
point attachment - Bolt Hole Circle Ø [mm]: 100
- Manufacturer: TOPRAN
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with nut, with studs General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks