Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: 25 E
-
Thread Size: 1/
8- 27NPT - Spanner Size: 13
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
for article number: 1.880.288, 1.880.343, 1.880.344, 1.880.346, 1.880.348
- Engine Code: 25 E
-
Thread Size: 1/
8- 27NPT - Spanner Size: 13
-
for article number: 7.8288,
7.8343, 7.8344, 7.8346, 7.8348 - Manufacturer: FACET
- Number of pins: 1
-
Thread Size: 1/
8x27NPT - Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thread Size: M12 x 1,
5 - Spanner Size: 19
- Number of pins: 2
- Colour Coding: blue
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Mounting Type: Bolted
- Voltage [V]: 12
-
Resistor [Ohm]: 1,
014, 146 - Temperature range from [°C]: 25
- Temperature range to [°C]: +80
-
Thread Size: 1/
8- 27 NPT - Sensor Type: NTC Sensor
- Number of pins: 1
- Housing Colour: black
- Number of mounting bores at thermostat housing: 1
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PT009107161
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: 25 E
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
for article number: 1.880.113,
1.880.114, 1.880.149, 1.880.151 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Engine Code: 25 E
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
for article number: 7.8113,
7.8114, 7.8149, 7.8151 - Manufacturer: FACET
-
Thread Size: M12x1,
5 - Number of pins: 2
- Housing Colour: black
- Manufacturer: FAE
- Engine Code: 25 E
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
for article number: 1.880.149,
1.880.151 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Engine Code: 25 E
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
for article number: 7.8149,
7.8151 - Manufacturer: FACET
-
Engine Code: S 25 E CIH,
S 25 H CIH -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: BOS
- Number of pins: 2
-
Thread Size: M12x1,
5 - Colour: black
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: 25 E CIH
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: BOS
- Engine Code: 25 E
-
Name: ANDUR,
DROSSELKLAPIASEND - Manufacturer: EPS
- Catalytic Converter Type: for vehicles with catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 08 26 285
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks