• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 264
• Brake Disc Thickness [mm]: 10
• Number of Holes: 5
• Surface: Coated

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 12
• Number of Holes: 5
• Surface: Coated

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 276
• Brake Disc Thickness [mm]: 26
• Number of Holes: 5
• Surface: Coated

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 26
• Bolt Hole Circle Ø [mm]: 105
• Number of Holes: 5
• Height [mm]: 46
• Centering Diameter [mm]: 60
• Surface: Coated
• Outer Diameter [mm]: 300
• Manufacturer: KAMOKA
• Quantity per packing unit: 2
• Additional information: 103-605-466
• Lisainfo: 103-605-466

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Bolt Hole Circle Ø [mm]: 105
• Number of Holes: 5
• Height [mm]: 44
• Centering Diameter [mm]: 60
• Surface: Coated
• Outer Diameter [mm]: 264
• Manufacturer: KAMOKA
• Quantity per packing unit: 2
• Additional information: 103527 KAMOKA
• Lisainfo: 103527 KAMOKA

• Fitting Position: Rear Axle
• Rim Size [inch]: 15
• Brake Disc Type: solid
• Rim Hole Number: 5
• Height [mm]: 44
• Brake Disc Thickness [mm]: 10
• Outer Diameter [mm]: 264
• Hub Diameter [mm]: 60
• Wheel Bolt Bore Diameter [mm]: 105
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Rim Size [inch]: 15.0
• Quantity per packing unit: 2
• Outer Diameter [mm]: 264
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Height [mm]: 44
• Rim Hole Number: 5
• Brake Disc Type: solid
• Centering Diameter [mm]: 60
• Bolt Hole Circle Ø [mm]: 105
• Surface: Coated
• Hub Diameter [mm]: 159
• Weight [kg]: 3.98
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 276
• Brake Disc Thickness [mm]: 26
• Required quantity: 2
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Replace in pairs only:
• Height [mm]: 45.4
• Bolt Hole Circle Ø [mm]: 105
• Centering Diameter [mm]: 60
• Number of Holes: 5
• Test Mark: ECE R90
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 26
• Bolt Hole Circle Ø [mm]: 105
• Number of Holes: 5
• Height [mm]: 46
• Centering Diameter [mm]: 60
• Surface: Coated
• Outer Diameter [mm]: 276
• Manufacturer: KAMOKA
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Height [mm]: 46
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Outer Diameter [mm]: 264
• Number of Holes: 5
• Centering Diameter [mm]: 60
• Bolt Hole Circle Ø [mm]: 105
• Thread Size 1: 14
• Thread Size 2: 7.5
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 26
• Bolt Hole Circle Ø [mm]: 105
• Number of Holes: 5
• Outer Diameter [mm]: 276
• Manufacturer: DELLO AUTOMEGA
• Quantity per packing unit: 2

• Fitting Position: Front Axle
• Minimum thickness [mm]: 23
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 26
• Bolt Hole Circle Ø [mm]: 105
• Hole Arrangement/Number: 05/06
• Height [mm]: 45.4
• Centering Diameter [mm]: 60
• Outer Diameter [mm]: 276
• Manufacturer: DENCKERMANN ZAWIESZENIE
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Bolt Hole Circle Ø [mm]: 105
• Number of Holes: 5
• Height [mm]: 45
• Centering Diameter [mm]: 60
• Surface: Coated
• Outer Diameter [mm]: 288
• Manufacturer: KAMOKA
• Quantity per packing unit: 2

• Fitting Position: Front Axle
• Rim Size [inch]: 15
• for POC: J67
• Brake Disc Type: Vented
• Rim Hole Number: 5
• Height [mm]: 45.4
• Brake Disc Thickness [mm]: 26
• Outer Diameter [mm]: 276
• Bolt Hole Circle Ø [mm]: 105
• Hub Diameter [mm]: 60
• Manufacturer: JPN

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 26
• Number of Holes: 5
• Surface: Coated

• Brake System: 15"
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 276
• Brake Disc Thickness [mm]: 26
• Height [mm]: 45.4
• Minimum thickness [mm]: 23
• Surface: painted
• Fitting Position: Front Axle
• for OE number: 13515906
• Manufacturer: ASHIKA-TARCZE
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• Rim Size [inch]: 16.0
• Quantity per packing unit: 2
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Height [mm]: 45
• Rim Hole Number: 5
• Brake Disc Type: solid
• Centering Diameter [mm]: 60
• Bolt Hole Circle Ø [mm]: 105
• Surface: Coated
• Hub Diameter [mm]: 168
• Weight [kg]: 5.2
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 26
• Required quantity: 2
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Replace in pairs only:
• Height [mm]: 45.4
• Bolt Hole Circle Ø [mm]: 105
• Centering Diameter [mm]: 60
• Number of Holes: 5
• Test Mark: ECE R90
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Rim Size [inch]: 15
• Blade tip surface: Coated
• Cutting Surface: Coated
• Blade surface: Coated
• Hammer Head Surface: Coated
• Frame surface: Coated
• Drill Surface: Coated
• Contact surface: Coated
• Hammer Face Surface (square side): Coated
• Housing Surface: Coated
• Surface: Coated
• Pliers head surface: Coated
• Tool handle surface: Coated
• Glove Inner Surface: Coated
• Jaw Surface: Coated
• Shaft surface: Coated
• Hammer Face Surface (round side): Coated
• Hammer Face Surface: Coated
• Glove Outer Surface: Coated
• Hammer Peen Surface: Coated
• Working Ends Surface: Coated
• Brake Disc Type: Vented
• Rim Hole Number: 5
• Height [mm]: 45.4
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 24
• Outer Diameter [mm]: 276
• Centering Diameter [mm]: 60
• Bolt Hole Circle Ø [mm]: 105
• Manufacturer: PROFIPOWER

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 44
• Outer Diameter [mm]: 264
• Bolt Hole Circle Ø [mm]: 105
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 60
• Weight [kg]: 3.98
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Minimum thickness [mm]: 23
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 26
• Bolt Hole Circle Ø [mm]: 105
• Hole Arrangement/Number: 05/06
• Height [mm]: 45.4
• Centering Diameter [mm]: 60
• Outer Diameter [mm]: 300
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Rim Size [inch]: 15
• for POC: J67
• for article number: LP3238
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Number of Holes: 5
• Test Mark: E1 90R-02C0277/2189
• Surface: Coated
• Outer Diameter [mm]: 276
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 24
• Centering Diameter [mm]: 60
• Height [mm]: 45.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG5067C

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 44
• Outer Diameter [mm]: 264
• Bolt Hole Circle Ø [mm]: 105
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 60
• Weight [kg]: 3.98
• Observe service information:
• Manufacturer: BLUE PRINT HAMULCE
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Brake Disc Thickness [mm]: 26
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 45.5
• Outer Diameter [mm]: 276
• Bolt Hole Circle Ø [mm]: 105
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 23
• Centering Diameter [mm]: 60
• Weight [kg]: 6.3
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 5
• Test Mark: E1 90R-02C0100/1551
• Surface: Coated
• Outer Diameter [mm]: 264
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 60
• Height [mm]: 44
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG4761C

• Brake Disc Thickness [mm]: 26
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 46
• Outer Diameter [mm]: 276
• Bolt Hole Circle Ø [mm]: 105
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 23
• Centering Diameter [mm]: 60
• Weight [kg]: 6.3
• Observe service information:
• Manufacturer: BLUEPRINT
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Rim Size [inch]: 15.0
• for POC: J67
• Quantity per packing unit: 2
• Outer Diameter [mm]: 276
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 23
• Height [mm]: 45.5
• Rim Hole Number: 5
• Brake Disc Type: Vented
• Centering Diameter [mm]: 60
• Bolt Hole Circle Ø [mm]: 105
• Surface: Coated
• Hub Diameter [mm]: 151
• Weight [kg]: 6.3
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 44
• Outer Diameter [mm]: 264
• Bolt Hole Circle Ø [mm]: 105
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 60
• Weight [kg]: 3.98
• Name: SW 33 10 2468
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Brake Disc Thickness [mm]: 26
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 45.5
• Outer Diameter [mm]: 276
• Bolt Hole Circle Ø [mm]: 105
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 23
• Centering Diameter [mm]: 60
• Weight [kg]: 6.3
• Name: SW 42 10 4857
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Rim Size [inch]: 16
• for POC: J60/J79
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Number of Holes: 5
• Test Mark: E4 90R-02C0703/2629
• Surface: Coated
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 23
• Centering Diameter [mm]: 60
• Height [mm]: 45.7
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG4783C

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Number of Holes: 5
• Height [mm]: 44
• Centering Diameter [mm]: 60
• Outer Diameter [mm]: 264
• Surface: Coated
• Minimum thickness [mm]: 8
• Manufacturer: BREMBO
• Name: BR 08.D225.11

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 12
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 46
• Centering Diameter [mm]: 60
• Outer Diameter [mm]: 288
• Surface: Coated
• Minimum thickness [mm]: 10
• Manufacturer: BREMBO
• Name: BR 08.D757.11

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 264
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Height [mm]: 44
• Bolt Hole Circle Ø [mm]: 105
• Brake Disc Type: solid
• Centering Diameter [mm]: 60
• Number of Holes: 5
• Surface: Coated
• Supplementary Article/Info 2: with bolts/screws
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 14
• Manufacturer: BOSCH
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 5
• Test Mark: E1 90R-02C0100/1554
• Surface: Coated
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Centering Diameter [mm]: 60
• Height [mm]: 45
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG4760C

• Fitting Position: Rear Axle
• Brake Size: 15"
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Surface: Coated
• Outer Diameter [mm]: 264
• Brake Disc Thickness [mm]: 10
• Height [mm]: 44
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 105
• Centering Diameter [mm]: 60
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 8
• Weight [kg]: 4
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Outer Diameter [mm]: 276
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 23
• Height [mm]: 45.5
• Bolt Hole Circle Ø [mm]: 105
• Brake Disc Type: Vented
• Centering Diameter [mm]: 60
• Number of Holes: 5
• Surface: Coated
• Machining: High-carbon
• Supplementary Article/Info 2: with bolts/screws
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 14
• Manufacturer: BOSCH
• Name: BS 0986479D92
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 12
• Height [mm]: 45.3
• Minimum thickness [mm]: 10
• Surface: Coated
• Inner Diameter [mm]: 156
• Bolt Hole Circle Ø [mm]: 105
• Centering Diameter [mm]: 60
• Hole Arrangement/Number: 05/06
• Wheel Bolt Bore Diameter [mm]: 14.1
• Weight [kg]: 5.2
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DD355122741
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Height [mm]: 45
• Bolt Hole Circle Ø [mm]: 105
• Brake Disc Type: solid
• Centering Diameter [mm]: 60
• Number of Holes: 5
• Surface: Coated
• Supplementary Article/Info 2: with bolts/screws
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 14
• Manufacturer: BOSCH UK£ADY HAMULCOWE
• Quantity per packing unit: 2

• Fitting Position: Front Axle
• Rim Size [inch]: 15
• Brake Size: 15"
• for RPO code: J67
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 26
• Number of Holes: 5
• Height [mm]: 46
• Centering Diameter [mm]: 60
• Outer Diameter [mm]: 276
• Surface: Coated
• Minimum thickness [mm]: 23
• Manufacturer: BREMBO
• Name: BR 09.D391.11

• Fitting Position: Front Axle
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 23
• Height [mm]: 45.5
• Bolt Hole Circle Ø [mm]: 105
• Brake Disc Type: Vented
• Centering Diameter [mm]: 60
• Number of Holes: 5
• Surface: Coated
• Machining: High-carbon
• Supplementary Article/Info 2: with bolts/screws
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 14
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Rim Size [inch]: 15.0
• for POC: J67
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Number of Holes: 5
• Outer Diameter [mm]: 264
• Centering Diameter [mm]: 60
• Height [mm]: 46
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Bolt Hole Circle Ø [mm]: 105
• Bore Diameter 1 [mm]: 14
• Bore Diameter 2 [mm]: 7.5
• Colour: black
• Surface: painted
• Test Mark: E190R-02C0190/0537
• Manufacturer: LUCAS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Rim Size [inch]: 15.0
• for POC: J67
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Number of Holes: 5
• Outer Diameter [mm]: 276
• Centering Diameter [mm]: 60
• Height [mm]: 45.5
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 23
• Bolt Hole Circle Ø [mm]: 105
• Bore Diameter 1 [mm]: 14
• Bore Diameter 2 [mm]: 9.5
• Colour: black
• Surface: painted
• Test Mark: E1 90R-02 C0176/0450
• Manufacturer: LUCAS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 12
• Minimum thickness [mm]: 10
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 5
• Inner Diameter [mm]: 156
• Bolt Hole Circle Ø [mm]: 105
• Height [mm]: 45
• Centering Diameter [mm]: 60
• Bore Diameter [mm]: 14
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0165/1007
• Manufacturer: ATE

• Fitting Position: Front Axle
• Rim Size [inch]: 16.0
• for POC: J60 , J79
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Number of Holes: 5
• Outer Diameter [mm]: 300
• Centering Diameter [mm]: 60
• Height [mm]: 45.5
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 23
• Bolt Hole Circle Ø [mm]: 105
• Bore Diameter 1 [mm]: 14
• Bore Diameter 2 [mm]: 9.5
• Colour: black
• Surface: painted
• Test Mark: E1 90R-02 C0176/0492
• Manufacturer: LUCAS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 264
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 105
• Height [mm]: 44
• Centering Diameter [mm]: 60
• Inner Diameter [mm]: 147
• Bore Diameter [mm]: 14
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0165/0635
• Manufacturer: ATE

• Fitting Position: Rear Axle
• for POC: J67
• paired article number: 573706J
• Quantity per packing unit: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 264
• Brake Disc Thickness [mm]: 10
• Supplementary Article/Info 2: without bolts/screws
• Height [mm]: 44
• Bolt Hole Circle Ø [mm]: 105
• Centering Diameter [mm]: 60
• Number of mounting bores: 1
• Number of Holes: 5
• Quantity Unit: Set
• Surface: Coated
• Test Mark: R90 Homologated
• Version: JC
• Weight [kg]: 8.31
• Bore Diameter [mm]: 14
• Minimum thickness [mm]: 8
• Packing Type: Carton
• Bore Diameter 2 [mm]: 14
• Packaging length [cm]: 28
• Packaging width [cm]: 28
• Packaging height [cm]: 10.5
• Manufacturer: JURID

• Fitting Position: Front Axle
• Rim Size [inch]: 16
• Brake Size: 16"
• for RPO code: J79, J60
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 26
• Number of Holes: 5
• Height [mm]: 46
• Centering Diameter [mm]: 60
• Outer Diameter [mm]: 300
• Surface: Coated
• Minimum thickness [mm]: 23
• Manufacturer: BREMBO
• Name: BR 09.D392.11

• Fitting Position: Front Axle
• for POC: J67
• paired article number: 573701J
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Outer Diameter [mm]: 276
• Brake Disc Thickness [mm]: 26
• Supplementary Article/Info 2: without bolts/screws
• Height [mm]: 45.4
• Bolt Hole Circle Ø [mm]: 105
• Number of Holes: 5
• Quantity Unit: Set
• Surface: Coated
• Version: JC
• Weight [kg]: 12.95
• Bore Diameter [mm]: 60
• Minimum thickness [mm]: 23
• Packing Type: Carton
• Packaging length [cm]: 29.1
• Packaging width [cm]: 29.1
• Packaging height [cm]: 11
• Manufacturer: JURID

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Outer Diameter [mm]: 276
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 23
• Brake Disc Type: Vented
• Surface: Coated
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 105
• Height [mm]: 45.5
• Centering Diameter [mm]: 60
• Inner Diameter [mm]: 139
• Bore Diameter [mm]: 14
• Test Mark: E1 90R-02C0115/0744
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid, Perforated
• Brake Disc Thickness [mm]: 12
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 45.5
• Centering Diameter [mm]: 60
• Outer Diameter [mm]: 288
• Surface: Coated
• Minimum thickness [mm]: 10.5
• Manufacturer: BREMBO

General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.

• Fitting Position: Front Axle
• Brake Size: 16"
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 26
• Height [mm]: 46
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 105
• Centering Diameter [mm]: 60
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 23
• Weight [kg]: 8.4
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 26
• Minimum thickness [mm]: 23
• Brake Disc Type: Vented
• Surface: Coated
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 105
• Height [mm]: 45.5
• Centering Diameter [mm]: 60
• Inner Diameter [mm]: 149
• Bore Diameter [mm]: 14
• Test Mark: E1 90R-02C0115/1008
• Manufacturer: ATE
• Quantity per packing unit: 2

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: solid, Perforated
• Brake Disc Thickness [mm]: 10
• Number of Holes: 5
• Height [mm]: 44
• Centering Diameter [mm]: 60.1
• Outer Diameter [mm]: 264
• Surface: Coated
• Minimum thickness [mm]: 8.5
• Manufacturer: BREMBO
• Name: BR 08.D225.1X

General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.

• Fitting Position: Front Axle
• Brake Size: 15"
• Quantity per packing unit: 2
• Brake Disc Type: internally vented, Perforated
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 276
• Brake Disc Thickness [mm]: 26
• Height [mm]: 46
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 105
• Centering Diameter [mm]: 60
• Test Mark: KBA 60872
• Minimum thickness [mm]: 23
• Weight [kg]: 6.3
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Rim Size [inch]: 16
• Brake Size: 16"
• for RPO code: J79, J60
• Brake Disc Type: perforated/vented
• Brake Disc Thickness [mm]: 26
• Number of Holes: 5
• Height [mm]: 45.5
• Centering Diameter [mm]: 60
• Outer Diameter [mm]: 300
• Surface: Coated
• Minimum thickness [mm]: 23.8
• Manufacturer: BREMBO
• Name: BR 09.D392.1X
• Quantity per packing unit: 2

General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.

• Fitting Position: Front Axle
• Brake Size: 16"
• Quantity per packing unit: 2
• Brake Disc Type: internally vented, Perforated
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 26
• Height [mm]: 46
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 105
• Centering Diameter [mm]: 60
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 23
• Weight [kg]: 8.4
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN