• Number of pins: 1
• Lisainfo: Temperature sensor for cooling system, 1 pin
• Additional information: Temperature sensor for cooling system, 1 pin

• Number of pins: 2
• Colour Coding: grey
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Number of pins: 2
• Housing Colour: light blue
• Connector Shape: oval
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Construction Year to: 01.1999
• Voltage [V]: 12
• Number of pins: 3
• Cable Length [mm]: 520
• Lisainfo: Sensor, crankshaft pulse
• Additional information: Sensor, crankshaft pulse

• Length [mm]: 37
• Thread Size: M10x1,0
• Spanner Size: 13
• Number of pins: 1
• Manufacturer: DELLO AUTOMEGA

• Switch point from [bar]: 0.3
• Switch point to [bar]: 0.55
• Length [mm]: 50
• Inner Diameter [mm]: 1
• External Thread [mm]: M14 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: brown
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Pressure [bar]: 5.5
• Housing Colour: black
• Thread Size: M14x1.5-6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE SW90012
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Colour Coding: white
• Sensor Type: NTC Sensor
• Thread Size: 1/8" x 27 NPT
• Number of pins: 1
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Fabrication Number: ECT-CH-006

• Connector Shape: round
• Operating Mode: Hydraulic
• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Number of pins: 1
• Switch point from [bar]: 0.3
• Switch point to [bar]: 0.55
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Switch point from [bar]: 0.3
• Length [mm]: 50
• Switch point to [bar]: 0.55
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: brown
• Surface: Zinc-coated
• Weight [kg]: 0.031
• Supplementary Article/Info 2: without seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer Restriction: BOSCH
• Number of pins: 2
• for OE number: 6238179;09198691
• Manufacturer: DELLO AUTOMEGA

• Manufacturer Restriction: BOSCH
• Number of pins: 2
• for OE number: 1338467;90541937
• Manufacturer: DELLO AUTOMEGA

• Length [mm]: 50
• Switch point from [bar]: 0.3
• Switch point to [bar]: 0.55
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: brown
• Surface: Zinc-coated
• Weight [kg]: 0.031
• Supplementary Article/Info 2: without seal ring
• Name: SW 99 91 7664
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: 1/8x27 NPTF
• Manufacturer: FAE

• Switch Pressure [bar]: 0.5
• Thread Size: M14x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Thread Size: M 14x1,5
• Housing Colour: black
• Manufacturer: FAE
• Additional information: 12430 FAE
• Lisainfo: 12430 FAE

• Pressure [bar]: 0.4
• Thread Size: M14 x 1,5
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Length [mm]: 36.7
• Outer Diameter [mm]: 8
• External Thread Size: M10 x 1
• Thread Length [mm]: 9.7
• Spanner Size: 13
• Number of connectors: 1
• Material: Brass
• Switch Point [°C]: 120
• Weight [kg]: 0.014
• Name: SW 40 23 0003
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: X 20 DTL
• Pressure [bar]: 1
• Thread Size: M14x1,5
• Spanner Size: 24
• Name: EP 1.800.069
• Manufacturer: EPS

• Thread Size: M14 x 1,5
• Spanner Size: 24
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Pressure [bar]: 0.42
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.5
• Thread Size: M14x1,50
• Spanner Size: 21
• Manufacturer: MAGNETI MARELLI
• Name: MM SAA101

• Length [mm]: 36.7
• Outer Diameter [mm]: 8
• External Thread Size: M10 x 1
• Thread Length [mm]: 9.7
• Spanner Size: 13
• Number of connectors: 1
• Material: Brass
• Switch Point [°C]: 120
• Weight [kg]: 0.014
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Connector Shape: rectangular
• Supplementary Article/Info 2: with seal ring
• Thread Pitch [mm]: 1.5
• Colour Coding: grey
• Sensor Type: NTC Sensor
• Thread Size: M 12
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Cable Length [mm]: 495
• Fabrication Number: ECP-PL-006

• Length [mm]: 61
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: grey
• Screw length below head [mm]: 28
• Weight [kg]: 0.023
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 61
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: grey
• Screw length below head [mm]: 28
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 40 92 8381

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Name: NI 207019
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 46462179
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Thread Size: M12x1.5
• Manufacturer: CALORSTAT BY VERNET

• Thread Size: M12x1.5
• Spanner Size: 19
• Corresponds to the original part in colour: green, black, grey, white
• Manufacturer: FAST

• Engine Code: X 20 DTL
• Adjustment: with automatic adjustment
• Operating Mode: Mechanical
• Name: EP 1.810.110
• Manufacturer: EPS

• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10253

• Outer Diameter [mm]: 7.4
• Resistor [Ohm]: 2,080, 294
• Supplementary Article/Supplementary Info: with seal
• External Thread [mm]: 12
• Thread Pitch [mm]: 1.5
• Temperature range [°C]: 25, 80
• Mounting Type: Bolted
• Colour: blue
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black, white, light blue
• not for trim level: 4mm
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107611

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Engine Code: X 20 DTL
• Manufacturer Restriction: BOSCH
• Housing Colour: black
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 1.880.170, 1.880.190
• Name: EP 1.830.239
• Manufacturer: EPS

• Supplementary Article/Supplementary Info: with seal
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

Manufacturer: DELLO AUTOMEGA

• Housing Colour: white
• Thread Size: M 12x1,5
• Number of pins: 2
• Manufacturer: FAE

• Engine Code: X 20 DTL
• Name: EP 1.994.003
• Manufacturer: EPS

• Number of pins: 2
• Colour Coding: grey
• Packaging length [cm]: 3.5
• Packaging width [cm]: 6
• Packaging height [cm]: 3.5
• Weight [kg]: 0.026
• for OE number: 1338467, 1338C7, 90541937

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

Manufacturer: VERNET

• Supplementary Article/Info 2: with cable
• Length [mm]: 450
• Height [mm]: 34.5
• Resistor [Ohm]: 900
• Number of connectors: 3
• Manufacturer: CALORSTAT BY VERNET

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

• Cable Length [mm]: 490
• Number of pins: 3
• Weight [kg]: 0.072
• Resistor [Ohm]: 980
• Fitting Depth [mm]: 35
• Manufacturer: ERA

Manufacturer: BOSCH

• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Cable Length [mm]: 480
• Number of pins: 3
• Manufacturer: DELPHI
• Quality class: PJ
• Name: Crankshaft position sensor

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Number of pins: 5
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Voltage [V]: 12
• Resistor [Ohm]: 900
• Tolerance [%]: 10
• Cable Length [mm]: 495
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009146211

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Cable Length [mm]: 450
• Manufacturer: FAE

• Vehicle Identification Number (VIN) from: W1000001
• Housing Type: with housing
• Fabrication Number: EPP-PL-004

• Housing Type: with housing
• Fabrication Number: EPP-PL-010

• Construction Year to: 01.1999
• Engine Code: X20DTL
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 900
• Weight [kg]: 0.08
• Manufacturer: VALEO
• Name: VA 254005

• Manufacturer: BOSCH
• Name: BS 0281002138

• Supplementary Article/Info 2: with cable
• Warranty: 5 years warranty
• Manufacturer: HUCO

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

Fabrication Number: EPP-VV-006

• Vehicle Identification Number (VIN) from: W1000001
• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Voltage [V]: 12
• Quality class: PJ
• Name: Air flow sensor

• Vehicle Identification Number (VIN) from: W1000001
• Housing Type: with housing
• Number of pins: 5
• Lisainfo: Air meter
• Additional information: Air meter

• Vehicle Identification Number (VIN) to: V7999999
• Quality class: PJ
• Name: Air flow sensor

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.25
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 07SKV071
• Manufacturer: ESEN SKV

• Vehicle Identification Number (VIN) from: W5000001
• Manufacturer: DELLO AUTOMEGA

Manufacturer: MAGNETI MARELLI

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 07SKV512
• Manufacturer: ESEN SKV

• Operating Mode: Electric
• Name: MM AMMQ19619
• Manufacturer: MAGNETI MARELLI

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI
• Name: MM AMMQ19616

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Block Separation:
• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10269-12B1

Vehicle Identification Number (VIN) from: W1000001/W5000001, W7000001/WP/WS, XL000001, W1000001

• Engine Code: X 20 DTL
• Operating Mode: Electric
• Voltage [V]: 12
• Number of pins: 5
• Length [mm]: 102
• Housing Type: without housing
• Manufacturer: PIERBURG

• Vehicle Identification Number (VIN) from: W1000001
• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH
• Name: BS 0281006756

• Vehicle Identification Number (VIN) from: W1000001
• for article number: 86009
• Number of pins: 5
• Manufacturer: MEAT&DORIA

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: round
• Number of pins: 1
• Spanner Size: 12
• Thread Size: 1/8 NPT
• for OE number: 3439088