Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Rear Axle
- Brake System: AP Lockheed
- Length [mm]: 29
- Thread Size: M6x1
- Thread Type: with external thread
- Spanner Size: 7
-
Name: OHUTUSKRUVI/
- KLAPP - Manufacturer: QBK
- Lisainfo: nippel 29mm M6x1 võti 7
- Additional information: nippel 29mm M6x1 võti 7
- Fitting Position: Rear Axle
- Bore Diameter 1 [mm]: 19
- Fitted Diameter [mm]: 29.9
- Manufacturer: ASHIKA
-
Lisainfo: 67-
01- 125 -
Additional information: 67-
01- 125
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Piston Diameter [mm]: 19.1
- Material: Aluminium
- Number of mounting bores: 2
- Supplementary Article/Info 2: with breather valve
- Observe system fill quantity:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Material: Aluminium
- Brake System: LOCKHEED
- Distance of mounting bores [mm]: 35
- Piston Diameter [mm]: 19
- Manufacturer: KAMOKA
- Fitting Position: Rear Axle
- for POC: JQ3
- Rim Size [inch]: 14.0
- Thread Size: 10 X 1
- Piston Diameter [mm]: 19.05
- Distance of mounting bores [mm]: 35
- Material: Aluminium
- Brake System: AP Lockheed
- Manufacturer: LPR
- Fitting Position: Rear Axle
- Bore Diameter [mm]: 19.05
- Thread Size: 10 x 1
- Brake System: APL
- Distance of mounting bores [mm]: 35
- Manufacturer: JPN
- Required quantity: 2
- Rim Size [inch]: 14.0
-
for POC: JQ3/
JQ4 -
Fitting Position: Rear Axle Left,
Rear Axle Right - Material: Aluminium
- Diameter [mm]: 19
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Piston Diameter [mm]: 19.1
- Material: Aluminium
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.125
- for OE number: 93189986
- Name: RATTAPIDURISILINDER
- Manufacturer: BLP
- Additional information: ADN14460
- Lisainfo: ADN14460
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Bore Diameter 1 [mm]: 19
- Fitted Diameter [mm]: 29.9
- Manufacturer: JAPKO
- Fitting Position: Rear Axle
- Material: Aluminium
- Piston Diameter [mm]: 19.05
- Name: RATTAPIDURISILINDER
- Manufacturer: MEY
-
Lisainfo: 36-
145310001 -
Additional information: 36-
145310001
- Piston Diameter [mm]: 19.1
- Material: Aluminium
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.125
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Weight [kg]: 0.14
- Brake System: LOCKHEED
- Packaging length [cm]: 7
- Packaging width [cm]: 6
- Packaging height [cm]: 3.5
- Manufacturer: FEBEST
- Fitting Position: Rear Axle
- Bore Diameter 1 [mm]: 19
- Fitted Diameter [mm]: 29.9
- Name: RATTAPIDURISILINDER
- Manufacturer: JPA
- Fitting Position: Rear Axle
- Brake System: Lockheed
- Material: Aluminium
- Piston Diameter [mm]: 19.05
- Name: RATTAPIDURISILINDER
- Manufacturer: MET
- Fitting Position: Rear Axle
- Rim Size [inch]: 14.0
-
for POC: JQ3/
JQ4 - Diameter [mm]: 19
- Brake System: LOCKHEED
- Material: Aluminium
- Thread Size: 1x M10x1.0
- Distance of mounting bores [mm]: 35
- paired article number: 52978X
- Weight [kg]: 0.13
- Manufacturer: ABS
- Fitting Position: Rear Axle
- Rim Size [inch]: 14
-
for POC: JQ3/
JQ4 - Brake System: AP Lockheed
- Supplementary Article/Supplementary Info: without integrated regulator
- Piston Diameter [mm]: 19.1
- Name: RATTAPIDURISILINDER
- Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
CORSA D, 07.06-
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
CORSA D, 07.06-
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Material: Aluminium
- Piston Diameter [mm]: 19
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- for POC: JQ3
- Rim Size [inch]: 14.0
- Material: Aluminium
- Thread Size: 10 x 1
- Brake System: APL
- Distance of mounting bores [mm]: 35
- Bore Diameter [mm]: 19.05
- Manufacturer: BREMBO
- Fitting Position: Rear Axle
- Piston Diameter [mm]: 19.05
- Manufacturer: BOSCH
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks