• Engine Code: M9T 880
• Required quantity: 1
• Corresponds to the original part in colour: brown, green
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS
• Additional information: 1-994-005
• Lisainfo: 1-994-005

• Number of pins: 3
• Fabrication Number: ECP-NS-016
• Manufacturer: NTY

• Engine Code: M9T 880
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.666, 1.880.703S, 1.880.706, 1.880.710S, 1.880.716, 1.880.718, 1.880.719, 1.880.720, 1.880.737, 1.880.782, 1.880.785, 1.880.883, 7.8916, 1.880.930

• Engine Code: M9T 880
• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Required quantity: 1
• Number of pins: 2
• for manufacturer number: 6PT 009 109-221
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009109221
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Connector Shape: oval
• Fabrication Number: ECM-RE-008
• Manufacturer: NTY

• Number of pins: 3
• Fabrication Number: ECM-NS-004
• Manufacturer: NTY

• Quantity: 1
• Number of pins: 3
• Connector Shape: rectangular
• Fitting Depth [mm]: 28.2
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Weight [kg]: 0.024
• Manufacturer: ERA

• Fabrication Number: ECS-DW-001
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

Manufacturer: FAST

• Engine Code: M9T 880
• Required quantity: 1
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Construction Year from: 08.2014
• Construction Year to: 12.2021
• Name: Andur,kompressorirohk
• Manufacturer: BOS

• Engine Code: M9T.8.80
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Exhaust System: before soot particulate filter
• Trim Level: 1 HOSE
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 150,000
• for OE number: 208150007R
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Construction Year from: 08.2014
• Construction Year to: 12.2021
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Exhaust System: before soot particulate filter
• Trim Level: 2 HOSES
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 100,000
• Manufacturer: NRF

• Required quantity: 1
• Manufacturer: BRM

Name: CZUJNIK CI—N. POWIETRZA RENAULT GRAND SCENIC 2,0DCI 05-

• Engine Code: M9T 880
• Exhaust System: before soot particulate filter
• Trim Level: 2HOSES
• Pressure from [kPA]: 0
• Pressure to [kPA]: 100
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Fitting Position: Left
• Height [mm]: 28.6
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 3
• Fitting Depth [mm]: 28
• Housing Colour: black
• Weight [kg]: 0.024
• Manufacturer: ERA

• for OE number: 82 00 974 421
• Number of pins: 3
• Connector Shape: oval
• Socket colour: blue
• Fabrication Number: ECS-RE-001

• Number of pins: 3
• Warranty: 5 years warranty
• Name: Andur, heitgaasisurve
• Manufacturer: HUC

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Exhaust System: before turbocharger
• Number of pins: 3
• for OE number: 1401000Q0C
• Manufacturer: NRF

• Number of pins: 3
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Name: CE 17SKV777
• Manufacturer: ESEN SKV

• Exhaust System: before soot particulate filter
• Number of circuits: 2
• Number of mounting bores: 1
• Connector Shape: oval
• Number of pins: 3
• Weight [kg]: 0.023
• for OE number: 22 77 1JG 70A
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Pressure from [kPA]: 50
• Pressure to [kPA]: 350
• Manufacturer: FAE

• Emission Standard: Euro 5
• Number of pins: 3
• Opening pressure [kPa]: 1
• Manufacturer: DELPHI
• Name: DE DPS00015

• Engine Code: M9T 716
• Construction Year from: 01.2017
• Construction Year to: 12.2021
• for OE number: 22770 00Q0C
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: BOS

• Engine Code: M9T 880
• Required quantity: 1
• Pressure from [kPA]: 31
• Pressure to [kPA]: 372
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.177
• Manufacturer: EPS

• Emission Standard: Up to Euro 5
• for OE number: 22770-00Q0A
• Connector Shape: oval
• Number of circuits: 1
• Number of mounting bores: 1
• Number of pins: 3
• Weight [kg]: 0.019
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: FAST

• Number of pins: 3
• Colour: black
• Pressure [Pa] to: 150,000
• Supplementary Article/Info 2: without connection line
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Required quantity: 1
• Supplementary Article/Info 2: with seal ring, without cable
• Pressure from [kPA]: 31.1
• Pressure to [kPA]: 372
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400751
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping range from [mm]: 10, 11, 11.5, 12.5
• Clamping range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Engine Code: M9T 880
• Fitting Position: Exhaust Turbocharger
• Thread Size: M12x1.25
• Cable Length [mm]: 260
• Number of pins: 2
• Connector Shape: rectangular
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Fitting Position: before catalytic converter
• Required quantity: 1
• for OE number: 8200916762
• Quality: OE
• Thread Size: M12x1.25
• Cable Length [mm]: 430
• Sensor Type: NTC Sensor
• Number of pins: 2
• Weight [g]: 36
• Gross Weight [g]: 64
• Manufacturer: DENSO
• Lisainfo: DET-0142 DENSO
• Additional information: DET-0142 DENSO

• Number of pins: 3
• Number of circuits: 2
• Number of mounting bores: 1
• for OE number: 22 77 011 77R, 626 905 22 00
• Manufacturer: MEAT&DORIA

• Number of connectors: 3
• Supplementary Article/Info 2: without fastening clamp
• Additionally required articles (article numbers): 8201428503
• Manufacturer: ERA

• Number of pins: 3
• Connector Shape: oval
• Number of circuits: 1
• for OE number: 82 00 974 421
• Manufacturer: MEAT&DORIA

• Engine Code: M9T 880
• Required quantity: 1
• Housing Type: with housing
• Length [mm]: 106
• Inner Diameter [mm]: 80
• Outer Diameter [mm]: 80
• Name: EP 1.991.450
• Manufacturer: EPS

• Engine Code: M9T 880
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 350
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.389
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Fitting Position: Exhaust Turbocharger
• Number of pins: 2
• Cable Length [mm]: 250
• Sensor Type: NTC Sensor
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Required quantity: 1
• Mounting Type: Pipe-neck
• Number of pins: 4
• Pipe socket mounting diameter [mm]: 80
• Suction pipe connector diameter [mm]: 80
• Supplementary Article/Supplementary Info: without attachment material
• Assy./disassy. by qualified personnel required!:
• Name: Ohumassimootja
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Quantity: 1
• Housing Type: without housing
• Number of pins: 4, 5
• Plug Type: Male
• Housing Colour: black/white
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: DE AF10660-12B1
• Manufacturer: DELPHI

• Number of pins: 6
• Connector Shape: oval
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Equipment: for vehicles with manual transmission
• for OE number: 18 01 016 26R
• Name: Pedaalikomplekt
• Manufacturer: MD