• Engine Code: M9T 870
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAX

• Engine Code: M9T 870
• Required quantity: 1
• Corresponds to the original part in colour: brown, green
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS
• Additional information: 1-994-005
• Lisainfo: 1-994-005

• Number of pins: 3
• Fabrication Number: ECP-NS-016
• Manufacturer: NTY

• Weight [kg]: 0.021
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M9T 870
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.666, 1.880.703S, 1.880.706, 1.880.710S, 1.880.716, 1.880.718, 1.880.719, 1.880.720, 1.880.737, 1.880.782, 1.880.785, 1.880.883, 7.8916, 1.880.930

• Engine Code: M9T 870
• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Required quantity: 1
• Number of pins: 2
• for manufacturer number: 6PT 009 109-221
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009109221
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Fabrication Number: ECM-NS-004
• Manufacturer: NTY

• Connector Shape: oval
• Fabrication Number: ECM-RE-008
• Manufacturer: NTY

• Quantity: 1
• Number of pins: 3
• Connector Shape: rectangular
• Fitting Depth [mm]: 28.2
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Weight [kg]: 0.024
• Manufacturer: ERA

• Fabrication Number: ECS-DW-001
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Required quantity: 1
• Manufacturer: BRM

Name: CZUJNIK CI—N. POWIETRZA RENAULT GRAND SCENIC 2,0DCI 05-

Manufacturer: FAST

• Engine Code: M9T 870
• Construction Year from: 12.2015
• Construction Year to: 09.2018
• Name: Andur,kompressorirohk
• Manufacturer: BOS

• Engine Code: M9T 870
• Required quantity: 1
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Engine Code: M9T 870
• Construction Year from: 12.2015
• Construction Year to: 09.2018
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Engine Code: M9T.8.70
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Exhaust System: before soot particulate filter
• Trim Level: 2 PIPES(-)
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 150,000
• for OE number: 208150007R
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Exhaust System: before soot particulate filter
• Trim Level: 2 PIPES(+)
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 100,000
• Manufacturer: NRF

• Number of pins: 4
• Plug Type: Male
• Voltage [V]: 12
• Housing Type: without housing
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: M9T 870
• Exhaust System: before soot particulate filter
• Trim Level: 2PIPES(+)
• Pressure from [kPA]: 0
• Pressure to [kPA]: 100
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Height [mm]: 28.6
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 3
• Fitting Depth [mm]: 28
• Housing Colour: black
• Weight [kg]: 0.024
• Manufacturer: ERA

• Number of pins: 3
• Warranty: 5 years warranty
• Name: Andur, heitgaasisurve
• Manufacturer: HUC

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28.6
• Supplementary Article/Info 2: without cable, with seal ring
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Exhaust System: before turbocharger
• Number of pins: 3
• for OE number: 1401000Q0C
• Manufacturer: NRF

• Exhaust System: before soot particulate filter
• Number of circuits: 2
• Number of mounting bores: 1
• Connector Shape: oval
• Number of pins: 3
• Weight [kg]: 0.023
• for OE number: 22 77 1JG 70A
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 12.2015
• Engine Code: M9T 870
• Number of pins: 3
• Pressure from [kPA]: 50
• Pressure to [kPA]: 350
• Manufacturer: FAE

• Engine Code: M9T 870
• Voltage [V]: 12
• Name: Ohumassimootja
• Manufacturer: MAX

• Emission Standard: Up to Euro 5
• for OE number: 22770-00Q0A
• Connector Shape: oval
• Number of circuits: 1
• Number of mounting bores: 1
• Number of pins: 3
• Weight [kg]: 0.019
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: FAST

• Number of pins: 3
• Colour: black
• Pressure [Pa] to: 150,000
• Supplementary Article/Info 2: without connection line
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: M9T 870
• Number of connectors: 3
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.02
• for OE number: 22 77 014 54R
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Supplementary Article/Info 2: with seal ring, without cable
• Pressure from [kPA]: 31.1
• Pressure to [kPA]: 372
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400751
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping range from [mm]: 10, 11, 11.5, 12.5
• Clamping range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Number of pins: 3
• Number of connectors: 2
• for OE number: 22 77 011 77R, 626 905 22 00
• Manufacturer: MEAT&DORIA

• Engine Code: M9T 870
• Required quantity: 1
• Housing Type: with housing
• Length [mm]: 106
• Inner Diameter [mm]: 80
• Outer Diameter [mm]: 80
• Name: EP 1.991.450
• Manufacturer: EPS

• Engine Code: M9T 870
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 350
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.389
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Housing Type: without housing
• Manufacturer: BREMI

• Fitting Position: Exhaust Turbocharger
• Number of pins: 2
• Cable Length [mm]: 250
• Sensor Type: NTC Sensor
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Required quantity: 1
• Mounting Type: Pipe-neck
• Number of pins: 4
• Pipe socket mounting diameter [mm]: 80
• Suction pipe connector diameter [mm]: 80
• Supplementary Article/Supplementary Info: without attachment material
• Assy./disassy. by qualified personnel required!:
• Name: Ohumassimootja
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Quantity: 1
• Housing Type: without housing
• Number of pins: 4, 5
• Plug Type: Male
• Housing Colour: black/white
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: DE AF10660-12B1
• Manufacturer: DELPHI

• Engine Code: M9T 870
• Operating Mode: Electric
• Voltage [V]: 12
• Name: Ohumassimootja
• Manufacturer: PIE

• Engine Code: M9T 704
• Cable Length [mm]: 590
• Number of connectors: 5
• Quality: IAM
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter, after soot particulate filter

• Engine Code: M9T 704
• Supplementary Article/Supplementary Info: with control unit
• Fitting Position: after SCR catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Thread pre-greased
• Cable Length [mm]: 590
• Number of pins: 5
• Connector Shape: oval
• Number of mounting bores: 2
• Exhaust System: after soot particulate filter
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.