• Engine Code: SR20DE
• Housing Colour: black
• Thread Size: M12x1,25
• Spanner Size: 13
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• Corresponds to the original part in colour: white, blue
• Connector Shape: oval
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• Manufacturer: MEAT&DORIA

• Construction Year from: 12.2001
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M 12x1,5
• Spanner Size: 19 mm
• Manufacturer: MEAT&DORIA

• Fabrication Number: ESS-NS-000
• Manufacturer: NTY

• Engine Code: SR20DE
• Housing Colour: blue
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: red, blue
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Housing Colour: light blue
• Manufacturer: FAE

• Number of pins: 2
• Connector Shape: oval
• Socket colour: red
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19
• for OE number: 22630 71L00
• Manufacturer: MEAT&DORIA

• Transmission Type: Manual Transmission
• Number of pins: 3
• Connector Shape: oval
• Number of mounting bores: 2
• Supplementary Article/Info 2: without cable
• Rotation Direction: Anticlockwise rotation
• for OE number: 22620 31U01
• Name: Andur,drosselklapiasend
• Manufacturer: MD

Number of pins: 2

• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 550590
• Manufacturer: ERA

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Connector/Clamp: Connector may need adjustment
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-UV-000
• Manufacturer: NTY

• Fitting Position: Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-NS-010
• Manufacturer: NTY

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-NS-007
• Manufacturer: NTY

Fitting Position: Front, Left Front, Right Front, before catalytic converter

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.4
• Manufacturer: VALEO

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Housing Type: with housing
• Fabrication Number: EPP-NS-011
• Manufacturer: NTY

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Alternatively:
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Name: VA 366170
• Manufacturer: VALEO

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 3
• Weight [kg]: 0.08
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV903

• Construction Year from: 11.2000
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 325
• Name: Lambda andur
• Manufacturer: DLP

• Transmission Type: Automatic Transmission
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Engine Code: SR20DE
• Cable Length [mm]: 450
• Manufacturer: DELPHI
• Name: DE ES10456-12B1

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: SR20DE
• Construction Year from: 09.2001
• Lambda Sensor: Diagnostic Probe
• Number of circuits: 4
• Supplementary Article/Info 2: without plug
• Manufacturer: ENERGY

• Construction Year from: 10.2000
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 350
• Number of circuits: 3
• Weight [kg]: 0.13
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV722
• Manufacturer: ESEN SKV

• Resistor [Ohm]: 3.5
• Conductor Number: 4
• Length [mm]: 445
• Number of circuits: 4
• Cable Length [mm]: 445
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 03.2001
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 3
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe
• Construction Year from: 02.2001
• Engine Code: SR20DE
• Voltage [V]: 12
• Length [mm]: 425
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV056

• Construction Year from: 10.2001
• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 420
• Name: DE ES20641-12B1
• Manufacturer: DELPHI

• Housing Type: with housing
• Fabrication Number: EPP-NS-001
• Manufacturer: NTY

Housing Type: without housing

• Construction Year from: 09.2001
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-0120
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.26
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year from: 10.2000
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 3
• Socket colour: blue
• Number of circuits: 3
• Connector Shape: oval
• Cable Length [mm]: 250
• Thread Size: M18 x 1,5
• Weight [kg]: 0.116
• for OE number: 22690-9F601
• Length [mm]: 330
• Number of connectors: 3
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Exhaust System: before catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Manufacturer: BOSCH

• Construction Year from: 03.2001
• Exhaust System: for pre-catalytic converter
• for OE number: 226909F601
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 390
• Number of pins: 3
• Weight [g]: 92
• Gross Weight [g]: 122
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)"

• Construction Year from: 09.2000
• Construction Year to: 09.2001
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 09.2000
• Transmission Type: Automatic Transmission
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: oval
• for OE number: 22690 7J500
• Length [mm]: 415
• Weight [kg]: 0.116
• Thread Size: M18 x 1,5
• Socket colour: grey
• Number of circuits: 3
• Cable Length [mm]: 390
• Number of pins: 3
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Exhaust System: before catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 10.2000
• Lambda Sensor: Diagnostic Probe, Finger probe, Heated
• Cable Length [mm]: 317
• Manufacturer: DELPHI

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 4
• Weight [kg]: 0.34
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Construction Year from: 10.2000
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Overall Length [mm]: 352
• Available as universal article as well, see article no.: 0258986502
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 10.2001
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 445
• Available as universal article as well, see article no.: 0258986506
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Engine Code: SR20DEL
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM