• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Connector/Clamp: Connector may need adjustment
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-UV-000
• Manufacturer: NTY

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Number of circuits: 3
• Weight [kg]: 0.08
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-NS-007
• Manufacturer: NTY

Fitting Position: Front, Left Front, Right Front, before catalytic converter

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 3
• Manufacturer: KAMOKA

• Fitting Position: Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-NS-010
• Manufacturer: NTY

• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 3
• Weight [kg]: 0.08
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV903

• Construction Year from: 10.2000
• Oxygen Sensor: Regulating Sensor, Finger-type Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 325
• Name: Lambda andur
• Manufacturer: DLP

• Construction Year from: 10.2000
• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Length [mm]: 350
• Guarantee: 3 years guarantee
• Number of circuits: 3
• Weight [kg]: 0.13
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV722
• Manufacturer: ESEN SKV

• Construction Year to: 09.2000
• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Length [mm]: 352
• Guarantee: 3 years guarantee
• Number of circuits: 3
• Weight [kg]: 0.14
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV721

• Number of circuits: 4
• Length [mm]: 445
• Conductor Number: 4
• Resistor [Ohm]: 3.5
• Cable Length [mm]: 445
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 3
• Quality: OE
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"

• Construction Year to: 09.2000
• Oxygen Sensor: Heated, Regulating Sensor
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 402
• Weight [kg]: 0.097
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 10.2000
• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 420
• Name: DE ES20641-12B1
• Manufacturer: DELPHI

• Oxygen Sensor: Diagnostic Probe
• Engine Code: QG18DE
• Construction Year from: 09.2000
• Voltage [V]: 12
• Length [mm]: 425
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV056

• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 100
• Gross Weight [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-0120
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Construction Year from: 09.2000
• Fitting Position: Rear, after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Number of circuits: 4
• for OE number: 226A0-7J601
• Connector Shape: angular
• Thread Size: M18 x 1,5
• Cable Length [mm]: 305
• Length [mm]: 420
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Diagnostic Probe
• Number of pins: 4
• Cable Length [mm]: 350
• for OE number: 226A07J601
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 09.2000
• Fitting Position: Front, before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 3
• Socket colour: blue
• Number of circuits: 3
• Connector Shape: oval
• Cable Length [mm]: 250
• Thread Size: M18 x 1,5
• for OE number: 22690-9F601
• Length [mm]: 330
• Number of connectors: 3
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 09.2000
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar Sensor, Heated, Thread pre-greased
• Supplementary Article/Info 2: without plug
• Cable Length [mm]: 210
• Number of circuits: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 09.2000
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Construction Year from: 10.2000
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 09.2000
• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor, Heated
• Cable Length [mm]: 317
• Manufacturer: DELPHI

• Construction Year from: 09.2000
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 390
• Number of pins: 3
• Manufacturer Restriction: DENSO
• for OE number: 226909F601
• Quality: OE
• Weight [g]: 92
• Gross Weight [g]: 122
• Manufacturer: DENSO

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)"

• Construction Year from: 09.2000
• Transmission Type: Manual Transmission
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 350
• Number of circuits: 3
• Manufacturer: VDO

• Fabrication Number: EGT-NS-013
• Cable Length [mm]: 150
• Manufacturer: NTY

• Construction Year from: 10.2000
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Overall Length [mm]: 352
• Available as universal article as well, see article no.: 0258986502
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Construction Year to: 09.2000
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Overall Length [mm]: 340
• Available as universal article as well, see article no.: 0258986502
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 10.2000
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 445
• Available as universal article as well, see article no.: 0258986506
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS