Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)

-
Filter type: In-
Line Filter - Length [mm]: 118
- Outer Diameter [mm]: 61
-
Diameter 1/Diameter 2 [mm]: IN/
OUT: 8 -
Manufacturer: ASHIKA-
FILTRY

-
Filter type: In-
Line Filter - Height [mm]: 120
- Outer Diameter 1 [mm]: 57
- Outer Diameter 2 [mm]: 60
- Inner Diameter 1 [mm]: 8
- Inner Diameter 2 [mm]: 8
- Manufacturer: DENCKERMANN FILTRY

-
Filter type: Spin-
on Filter - Manufacturer: JPN

- Outer Diameter 1 [mm]: 64.5
- Length [mm]: 56.5
- Width [mm]: 64.5
- Height [mm]: 125
- Outer Diameter [mm]: 56.5
-
Filter type: Spin-
on Filter - Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Manufacturer: ACKOJA
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

-
Filter type: In-
Line Filter - Length [mm]: 118
- Housing material: Metal
- Outer Diameter [mm]: 62
- Pipe Diameter [mm]: 8
- Weight [kg]: 0.181
- Observe service information:
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

-
Filter type: In-
Line Filter - Length [mm]: 118
- Housing material: Metal
- Outer Diameter [mm]: 62
- Pipe Diameter [mm]: 8
- Weight [kg]: 0.181
-
Manufacturer: FEBI-
FILTRY
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Height [mm]: 122
- Outer Diameter [mm]: 60
- Packing Type: Carton
-
Filter type: In-
Line Filter - Inlet Ø [mm]: 9.3
- Outlet Ø [mm]: 8
- Packaging length [cm]: 8
- Packaging width [cm]: 8
- Packaging height [cm]: 12.3
- Name: CH CFF100215
- Manufacturer: CHAMPION

-
Filter type: In-
Line Filter - Outer Diameter [mm]: 62
- Height [mm]: 122
- Manufacturer: HENGST FILTER

- Construction Year to: 08.1990
- Fuel Mixture Formation: Petrol Injection
-
Filter type: In-
Line Filter - Diameter [mm]: 63.5
- Height [mm]: 125
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Manufacturer: BOSCH
- Name: BS 0450905326

- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 115
- Height [mm]: 47.5
- Thickness [mm]: 15.4
- WVA Number: 21345
- Brake System: AKEBONO
- Test Mark: ECE R90 APPROVED
- Manufacturer: JAPKO

- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 115
- Height [mm]: 47.5
- Thickness [mm]: 15.4
- WVA Number: 21345
- Brake System: AKEBONO
- Test Mark: ECE R90 APPROVED
-
Manufacturer: ASHIKA-
KLOCKI

-
Filter type: In-
Line Filter - Height [mm]: 121
- Outer Diameter [mm]: 62
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- SVHC: No SVHC present!
- Manufacturer: FILTRON

-
Filter type: In-
Line Filter - Height [mm]: 125
- Outer Diameter [mm]: 64
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Outer Diameter 1 [mm]: 57
- SVHC: No SVHC present!
- Manufacturer: MANN

-
Filter type: In-
Line Filter - Diameter [mm]: 54.9
- Height [mm]: 125
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Net Weight [g]: 112
- Packaging height [cm]: 14
- Packaging length [cm]: 6.5
- Packaging width [cm]: 6.5
-
Manufacturer: FILTRY KNECHT /
MAHLE - Name: KN KL171

-
Filter type: In-
Line Filter - Diameter [mm]: 54.9
- Height [mm]: 125
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Net Weight [g]: 112
- Packaging height [cm]: 14
- Packaging length [cm]: 6.5
- Packaging width [cm]: 6.5
- Manufacturer: MAHLE KNECHT

- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Length [mm]: 99
- Height [mm]: 33.6
- Thickness [mm]: 13.8
- WVA Number: 21734
- Manufacturer: JAPKO

- Construction Year to: 08.1990
- Number of Teeth: 151
-
Length [mm]: 1,
208 - Width [mm]: 19
- Tooth Pitch [mm]: 8
- Manufacturer: BOSCH

- Construction Year to: 08.1990
- Fitting Position: Front Axle
- Wear Warning Contact: with acoustic wear warning
- Article number of recommended accessories: 1987474124
- Product must be determined on the vehicle or the motor:
-
Material: Low-
Metallic -
Test Mark: ECE-
R90 - WVA Number: 21344
- Thickness [mm]: 16
- Width [mm]: 115.3
- Height [mm]: 47.5
- Manufacturer Restriction: AKEBONO System
- Manufacturer: BOSCH UK£ADY HAMULCOWE

- Driven Units: Camshaft
- Number of Teeth: 151
- Width [mm]: 19
- Belts: with rounded tooth profile
- Manufacturer: JAPKO

- Driven Units: Camshaft
- Number of Teeth: 151
- Packaging length [cm]: 25.5
- Packaging width [cm]: 16
- Packaging height [cm]: 3
- Weight [kg]: 0.16
- Width [mm]: 19
- Tooth Pitch [mm]: 8
- Manufacturer: CONTITECH

- Driven Units: Camshaft
-
Article number of the recommended special tool: STT-
1 - Tensile Cord Material: Fiberglass
-
Belt Material: HNBR
(hydrogenated nitrile butadiene rubber) - Colour: black
- Number of Teeth: 151
- Width [mm]: 19
- Tooth Pitch [mm]: 8
-
Length [mm]: 1,
208 - Manufacturer: GATES

- Construction Year to: 08.1990
- Camshaft: DOHC
-
for model code: N13,
B12 - Belt Width [mm]: 19
- Number of Teeth: 151
- Belts: with rounded tooth profile
- Manufacturer: SKF